|
| 1 | Labour for boring tube well of required dia. By water jet system should have a minimum 50nn gap in between the outside of the tube well pipe and the bore.(i) 40 mm dia . Boring etc.Ref:- PWD Sanitary & Plumbing w.e.f 01.11.2017 P-49, Item-1(c),(i)& (ii) |
| 2 | Labour for boring tube well of required dia. By water jet system should have a minimum 50nn gap in between the outside of the tube well pipe and the bore.(ii) 80 mm dia . Boring etc.Ref:- PWD Sanitary & Plumbing w.e.f 01.11.2017 P-49, Item-1(c),(i)& (ii) |
| 3 | Supplying fitting and fixing steel cutter plug, up to 450mm long with socket.(i) (i) 40 mm dia .Ref:- PWD Sanitary & Plumbing w.e.f 01.11.2017 P-53, Item-9(i), |
| 4 | Supplying high density polythene strainer of approved make with adapter conforming to I.S.(i) 40mm dia.Ref:- PWD Sanitary & Plumbing Schedule w.e.f 01.11.2017 P-52, Item-5(i), |
| 5 | Supplying fitting and fixing plug of approved make conforming to I.S. Supplying fitting and fixing.(i) 40mm dia.Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-53, Item-10(i), |
| 6 | Supplying of PVC rigid pipes & fittings (medium duty) conforming to ASTMD-1785 & Threaded to match with G.I Pipes as per IS 1239 (Part-I)(a) P.V.C pipes 40 mm dia.Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-13, Item-19(iii)A, |
| 7 | Supplying of PVC rigid pipes & fittings (medium duty) conforming to ASTMD-1785 & Threaded to match with G.I Pipes as per IS 1239 (Part-I)(b) P.V.C pipes 80 mm dia.Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-13, Item-19(iii)A, |
| 8 | Supplying of G.I. reducing socket with I.S.I. mark. (vii) 80mm dia. Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-104, Item-5(vii) |
| 9 | Supplying of G.I pipe of TATA make of different dia including necessary socket.(i) 40 mm dia . (medium quality).Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-102, Item-e(ii)&h(ii), |
| 10 | Supplying of G.I pipe of TATA make of different dia including necessary socket.(ii) 80 mm dia. (medium quality).Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-102, Item-e(ii)&h(ii), |
| 11 | Supplying of G.I . sockets with I.S.I mark. (i) 40 mm dia. Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-103, Item-2(v)&2(vii), |
| 12 | Supplying of G.I . sockets with I.S.I mark.(ii) 80 mm dia. Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-103, Item-2(v)&2(vii), |
| 13 | Supplying fitting & fixing special hand pump no: 6 approved make (for 50mm or 40 mm dia tube well).Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-54, Item-13. |
| 14 | Supplying fitting & fixing 65mm dia. Deep well brass cylinder with necessary fittings and accessories.Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-54, Item-15. |
| 15 | Supplying fitting & fixing 15mm dia. Galv. M.S. connecting rod with sockets.Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-54, Item-16. |
| 16 | Cutting out pipe and making threads.A bove 32mm up to 50mm dia.Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-26, Item-8(iii) & iv, |
| 17 | Cutting out pipe and making threads.A bove 50mm up to 80mm dia.Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-26, Item-8(iii) & iv, |
| 18 | Supply of P.V.C nipple 300 long & 80mm dia.Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-16, Item-19(iii) F (v). |
| 19 | Washing and developing tube well with air compressor pump and engine for (Eight)hours Continuous pumping per day with necessary arrangement for testing the yield in gallons per hour ‘v’ notch including hire and labour charges for all tools and plants and scaffolding as required.Ref:- PWD Sanitary & Plumbing Schedule (01.11.2017 ) P-55, Item-20. |
| 20 | Single brick flat soiling of picked jhama Bricks including ramming and dressing bed toProper level and filling joints with poweredearth or local sand.Ref : PWD (Bldg) Schedule (01.11.2017) P-14, Item-1,3rd corri. |
| 21 | Ordinary cement concrete (mix 1:1.5:3) with graded stone chips(20 mm nominal size) excluding shuttering and reinforcement1) Pakur variety.Ref : PWD (Bldg) Schedule (01.11.2017) P-24,Item-4(a) |
| 22 | 125mm.thick brick work with 1st classBricks in cement mortar (4: 1) in ground floor.Ref : PWD (Bldg) Schedule (01.11.2017) P-16, Item-16 |
| 23 | Plaster with sand and cement mortar of ......all material (15 mm thick)(a) With 4:1 cement mortar.Ref:- PWD (Bldg) Schedule (01.11.2017) P-189, Item-1(ii)b |
| 24 | Net cement punning on cement plaster surface.Ref:- PWD (Bldg) Schedule (01.11.2017) P-192, Item-15 |
| 25 | Collecting sample of water for bacteriological test.........as per direction.P.W.D (S & P)W.C ll w.e.f 01/11/2017 P-55.Item-23. |
| 26 | Add GST |
| 27 | Add Cess 1 % Please Enable Macros to View BoQ information |
