|
| 1 | Work Materials |
| 2 | Stone Aggregate(single size): 40 mm nominal size |
| 3 | Stone Aggregate(single size):20 mm nominal size |
| 4 | Stone Aggregate(single size): 10 mm nominal size |
| 5 | Portland Cement |
| 6 | Coarse sand (zone III) |
| 7 | Fine sand (zone IV) |
| 8 | Mild Steel round bar above 12 mm dia |
| 9 | Twisted steel/deformed bars |
| 10 | Structural steel such as tees, angles, channels and R.S. joists |
| 11 | Flats up to 10 mm in thickness |
| 12 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots,10 nos |
| 13 | Galvanised steel J or L hooks 8 mm dia,10 nos |
| 14 | Stone for masonry work |
| 15 | G.I Limpet washer,50 nos |
| 16 | Bitumen washer,50 nos |
| 17 | Wire nails |
| 18 | Mild steel tubes hot finished welded type |
| 19 | Red oxide Zinc chromate primer |
| 20 | Epoxy paint |
| 21 | wall form panel 1250x500 mm |
| 22 | Corner angle 45x45x5 mm 1.50 m long |
| 23 | 100 mm channel shoulder 2.5 m long |
| 24 | Double clip (bridge clip) |
| 25 | Single clip |
| 26 | M.S. Tube 40 mm dia |
| 27 | Adjustable span ESO+SI (2.35-3.40) |
| 28 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 29 | Boulder 50 mm to 200 mm |
| 30 | Gravel 5 mm to 10 mm |
| 31 | Stainless steel screws 50 mm,50 nos |
| 32 | GI trafford profile sheet 0.35mm thick |
| 33 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
| 34 | Aracanut post |
| 35 | Solid blocks of size 40x20x15cm |
| 36 | Solid blocks of size 30x20x15cm |
| 37 | Solid blocks of size 40x20x10cm |
| 38 | PVC pipe 63 mm outer dia. 4 kgf/cm2 |
| 39 | PVC Elbow 63 mm dia |
| 40 | PVC bend 63 mm dia |
| 41 | laterate stone of size 40x20x15cm |
| 42 | Quarry Waste Please Enable Macros to View BoQ information |
