|
| 1 | As Per RUIDP SOR 2023 |
| 2 | Earth work in excavationin foundation,trenches etc.including dressing of sides and ramming of bottoms, including gettingout the excavated material, refilling after laying pipe/ foundation and disposal ofsurplus excavated material at alead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. |
| 3 | Providing and laying cement concreting including curing, compaction etc. complete in spesified gradeexcluding cost of centeringandshuttering-AlltypeuptoPlinthlevel. using:1: 4 : 8(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm Nominal size) |
| 4 | Centring and shuttering with plywood or steel sheet upto two stories ( each story of height upto 3.5 metre from floor level) includingstrutting,proppingetc.andremovalofformfor :Foundations, footings, bases of columns, etc. for massconcrete |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto two stories excluding cost of centring,shuttering, finishing and reinforcement : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placingin position andbinding all complete. |
| 7 | Steel work in built up tubular trusses including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. completeHot finished welded type tubes |
| 8 | Providing and fixing High Intensity retro reflective Type IV sign plate made out of 2.00 mm thick aluminium sheet face to be fully covered with blue/green high intensity grade retro reflective sheet and logo/matters, boarder made of with similar type of white sheeting after etching treatment of aluminium sheet,the black side is to be painted with epoxy grey paint. the |
| 9 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. completeOn steel work Please Enable Macros to View BoQ information |
