|
| 1 | Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed. |
| 2 | Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed. |
| 3 | Taking down shutter of any description exceeding 1 Sqm but n. exc 2 Sqm each complete all as specified and as directed. |
| 4 | Taking down shutter of any description exceeding 2 Sqm each complete all as specified and as directed. |
| 5 | Supply and fix pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast including providing cement concrete type C-0 (1:3:6) (using 12.5mm graded aggregate) as in pressed steel door frame (backfil) and as in holdfast etc, complete all as specifed and as directed. |
| 6 | Supply and fix pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast including providing cement concrete type C-0 (1:3:6) (using 12.5mm graded aggregate) as in pressed steel door frame (backfil) and as in holdfast etc, complete all as specifed and as directed. |
| 7 | Supply and fix for 35mm thick 2nd class hard wood factory made plain, framed paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venered partical board with commercial veneering on both side faces.The size of rail and stile as per ISI 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutter) complete all as specified and as directed. |
| 8 | Supply and fix for 30mm thick flush shutter, solid core construction, with block board core plywood face panels, commercial type on both sides, chemically treated against termite infestation, complete all as specified and as directed. |
| 9 | Supply and fix for 30mm thick 1st class HW glazed andskelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc size of shutters including wire mesh as specified in SSR-I, complete all as specified and as directed. |
| 10 | Supply and fix factory made Solid PVC Door Frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. Square tube etc complete all as specified and as directed. |
| 11 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed. |
| 12 | Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter framesize 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 5mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed. |
| 13 | Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.complete all as specified and as directed. |
| 14 | Material and labour for aluminum alloy powder coated door shutter including frame partly panelled partly glazed shutter having door frame made out of alumunium anodised section of size (101x44.45x2.00 mm) thick and shutter made out of bottom rail of tube section (114x44.45x2.00 mm) thick and top rail, middle rail, styles of tube section (85x44.45x2.00mm) thick, using 5 mm thick tinted glass of selected quality of required size fixed with rubber beadding, aluminium clip, glazing plate and6-8 mm dia anchor tod and 12 mm thick both side prelaminated particle board including fixed aluminium anodised 2 nos 125 mm circular/American handle, 200 mm long tower bolts -2 Nos, Door Stopper 2 Nos, 01 No mortice lock 4 lever (ISI), vertical type of 65 mm with triplicate key, bush and including 01 Nos each shutter Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, Making good of wall surface to match with existing surface complete door frame fixed to wall with 8 nos rawl plugs 150mm fixed,etc complete all as specified and as directed. |
| 15 | Material and labour for preparationof new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and as directed. |
| 16 | Material and labour for preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 17 | Supply and fix butt hinges 100mm in size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed. |
| 18 | Supply and fix extruded brass handles, fabricated type polished 150mm long fixing with screws etc complete all as specifed and as directed. |
| 19 | Supply and fix for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 20 | Supply and fix Aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed. |
| 21 | Supply and fix Aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specifed and as directed. |
| 22 | Supply and fix extruded aluminium alloy handles 150mm long in size, fabricated type,anodised complete all as specified and as directed. |
| 23 | Material and labour for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including external teak wood lipping, 6mm thick fixed with nailse around the partical board etc complete all as specified and as directed. |
| 24 | Supply and fix 40mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 25 | Material and labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section exc 13.00 & n. exc 25.00 Sqcm, clean sawn, secured with nails or brads complete all as specified and as directed. |
| 26 | Supply and fix for hasp and staple 125mm in size, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 27 | Supply and fix in repair harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 28 | Supply and fix in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 29 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 30 | Supply and fix, plain sheet glass 3mm thick, ordinary quality, not exc 0.50 Sqm in each pane fixed to aluminium door/window and steel window/frame with oil putty and securing pins, spring clips etc complete all as specified and as directed. |
| 31 | Supply and fix 5mm thick float glass, tinted/smoked shape fixed to frame/shutter for Aluminium door / window / partition etc including aluminium powder coated snap beading and rubber gasket, complete all as specified and as directed. |
| 32 | Material and labour for repairing any type of aluminium/wooden door shutter and refixing in the same opening after resecuring its frame work by means of tightning with new screws of by aluminium angle, cleat and other connected work complete all as specifed and as directed |
| 33 | Supply and fix in repair Aluminium (Die cast) door closure hydrauically regulated, designation, No-2, universal type suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60Kg and fixed, complete all as specified and as directed. |
| 34 | Supply and fix in repairfor double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 35 | Supply and fix in repair Brass mortice lock vertical type 100mm size, 4 lever fixed in aluminium shutter, complete all as specifed and as directed. |
| 36 | Supply and fix in repair Aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed. |
| 37 | Supply and fix in repair 140mm size floor door stopper of aluminium alloy body and tongue, inodised, with hard drawn steel spring, fixed in floor for aluminium/wooden door, complete all as specified and as directed. |
| 38 | Supply and fix in repair Brass, 300mm in length sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and as directed. |
| 39 | Supply and fix in repair 140mm size floor door stopper of Brass body and tongue, with hard drawn steel spring, fixed in floor for aluminium/wooden door, complete all as specified and as directed. |
| 40 | Supply and fix E-board \"Everest\" make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm andspaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour including taking down old/existing false ceiling/boards all as per manufacture instruction, etc complete all as specified and as directed. |
| 41 | Material and labour for Granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 42 | Supply and fix Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site including 5mm thick PVC sheet fillet of width 35mm for wall paneling on PVC frame as per specifications etc including taking down old/existing any type of wall panelling/board complete all as specified and as directed. |
| 43 | Taking down mild steel rolling shutters/collapsible steel gate of any size and description, complete all as specified and as directed. |
| 44 | Supply and fix 1.25mm thick steel rolling shutters without ball bearing as specified of push pull or manual type as specifed, including top cover, anchoring rod, hasp & staple and one coat of primer and two coat of synthetic enamel paint; erected in position as indicated complete all as specified and as directed. |
| 45 | Supply and fix 1.25mm thick steel rolling shutters without ball bearing or gear operated type with bevel gear box and crank handle as specified, including top cover, anchoring rod, hasp & staple and one coat of primer and two coat of synthetic enamel paint; erected in position as complete all as specified and as directed. |
| 46 | Overhauling, servicing and realignment of iron gate/rolling shutters of area not exc 12 Sqm including replacement of defective bearing and grinding of wheels for smooth movement of shutter, replacement of clamps, bolt, gear box with crank handle etc including cleaning, oiling and greasing of movable parts and welding work all as specified and as directed. NOTE :- (i) Necessary arrangement of crane/moving ladder shall be made by the contractor without any extra cost |
| 47 | Overhauling, servicing and realignment of iron gate/rolling shutters of area exc 12 Sqm including replacement of defective bearing and grinding of wheels for smooth movement of shutter, replacement of clamps, bolt, gear box with crank handle etc including cleaning, oiling and greasing of movable parts and welding work all as specified and as directed.NOTE :- (i) Necessary arrangement of crane/moving ladder shall be made by the contractor without any extra cost |
| 48 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings/wall cladding etc complete all as specifed and as directed. |
| 49 | Supply and fix for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as as specified and as directed. |
| 50 | Supply and fix for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as as specified and as directed. |
| 51 | Dismantaling timberin scantling 40 sq.cm and over in section in any position and any description unframed wk or unframed work complete all as specified and as directed.. |
| 52 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specifed and as directed. |
| 53 | Supply and fix for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specifed and as directed. |
| 54 | Demolition of existing tarfelt any no of layers /plaster/Thermo seal etc in water proofing treatement to roof and cleaning the surface with wire brushes including removal of all dust or dirt etc to the distance outside the defence land complete all as specified and as directed. |
| 55 | Material and labour for PCC 1:2:4 type B-0 (12.5mm graded stone agg) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. |
| 56 | Material and labour for rRendering 10mm thick on concrete surface in cementmortar (1:3) with water proofing compound finishing even and fair without using extra cement as in under layer of roof treatement at any height complete all as specified and as directed. NOTE :- Water proofing compound shall be measured and paid separetely |
| 57 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 58 | Applying a coat of bitumen primer @ 0.3kg/Sqm conforming to IS 3384 and having 3mm thick APP modified water proofing membrane reinforced with non woven polyster matt having softening point not less than 150 degree centigrade, having tensile strength 650 N/Sqcm in longitudinal & 400 N/Sqcm in transverse direction by torch method with min 100mm side lap and 150mm end lap followed by application of a coat of hot blown bitumen 85/25 grade @ 1.2kg per sqm and blinded with clean dry sand @ 0.5kg/Sqm over the APP memebrane and including applying two coat of solar reflective bituminious aluminium paint over APP memebrane @ 0.20Kg/Sqm complete all as specifed and as directed.NOTE :- The water proofing treatement shall be carried out by the Authorised applicator of the manufacturer.) |
| 59 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed. |
| 60 | Material and labour for Brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 in any position, complete all as specifed and as directed. |
| 61 | Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like etc complete all as specifed and as directed. NOTE :- Water proofing compound shall be measured & paid separetely. |
| 62 | Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint at any height including necessary scaffolding ladder etc complete all as specifed and as directed. |
| 63 | Supply and fix 15mm bore tubes, \"medium grade\" galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed. |
| 64 | Supply and fix 20mm bore tubes, \"medium grade\" galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed. |
| 65 | Supply and fix in repair for vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including \"P\" or \"S\" trap & PVC flushing bend fixed complete all as specifed and as directed. |
| 66 | Supply and fix in repairs for vitreous china wash down water closet pan, pedestal pattern, white, including PVC flush pipe fixed complete including connection to existing cistern including \"P\" or \"S\" trap complete all as specifed and as directed. |
| 67 | Supply and fix in repairs for Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specifed and as directed. |
| 68 | Supply and fix in repairs for vitreous china Urinal, half stall type white standard size (excluding flushing cistern flush pipe and waste pipe ) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing urinal spreader of PTMT any colour, grating and union for discharge pipe fixed complete all as specifed and as directed. |
| 69 | Supply and fix in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets complete all as as specified and as directed. |
| 70 | Supply and fix in repair for 15mm bore stop valve, cast copper alloy, screwed down,, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specifed and as directed. |
| 71 | Supply and fix in repairs for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specifed and as directed. |
| 72 | Supply and fix in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specifed and as directed. |
| 73 | Supply and fix in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specifed and as directed. |
| 74 | Supply and fix in repairs central hold basin mixer chromium plated Hot and cold with copper pipe complete all as as specified and as directed. |
| 75 | Supply and fix in repairs wall mixer telephonic type chromium plated with CP wall flange complete all as as specified and as directed. |
| 76 | Supply and fix in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinals fixed complete all as as specified and as directed. |
| 77 | Supply and fix in repairs for PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed complete all as specifed and as directed. |
| 78 | Supply and fix in repair grating doom 125mm dia with waste hole of PTMT (min wt 40g) all as specifed and as directed. |
| 79 | Supply and fix in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as as specified and as directed. |
| 80 | Supply and fix in repair for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specifed and as directed. |
| 81 | Supply and fix in repairs for vitreous china wash basin, white, flat back size 550x400 excluding taps, waste chain and plug and porecelain stopper but including bracket any size and waste coupling of PTMT, including cutting for and pinning in ends of bracket or erecting stand execlusive of fixing of supply and waste pipe etc fixed complete all as specifed and as directed. |
| 82 | Supply and fix in repair rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specified and as directed. |
| 83 | Supply and fix in repair rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specified and as directed. |
| 84 | Supply and fixin repair for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 85 | Supply and fix for PVC bathroom cabinet mirror 600x450mm including all necessary arrangement and fitting complete all as specified and as directed. |
| 86 | Supply and fix in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 87 | Supply and fix in repairs for vitreous china white urinal partition of size 310 x 700mm fixed to wall with brass CP screws fixed complete all as specified and as directed. |
| 88 | Supply and fix in repairs for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and as directed. |
| 89 | Supply and fix in repairs75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor upto height 10 mtr etc complete all as specifed and as directed. |
| 90 | Supply and fix in repair for 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as direced. |
| 91 | Supply and fix in repair PVC floor trap/Nahani trap 75mm complete all as specifed and as directed. |
| 92 | Supply and fix in repair 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as as specified and as directed. |
| 93 | Supply and fix in repair for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall upto height 10 mtr etc complete all as as specified and as directed. |
| 94 | Supply and fix in repair for 110mm bore PVC (SWR) bends, branch piece or similar fitting are required to make the system functional complete all as as specified and as directed. |
| 95 | Supply and fix for 110mm bore PVC (SWR) junction single, (Single T), equal or unequal fitting as reqd to make the system functional complete all as as specified and as directed. |
| 96 | Material and labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 97 | Material and labour for Glazed coloured ceramic tiles External/Internal in vertical surface 300mm x 450mm x 7mm/300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed. |
| 98 | Material and labour for vitrified tiles 10mm thick (square/rectangular) polished area of each tile n. exc 0.36 sqm in floor over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 99 | Description all as per Ser item No 98 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed. |
| 100 | Material and labour for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specified and as directed. |
| 101 | Material and labour for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes & stopping of surfaces & levelling/edging the disturbed places/edges using necessary filling compound of Birla/JK wall care putty 3mm thick to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper emulsion upto height 10 mtr etc complete all as specified and as directed. |
| 102 | Material and labour for preparation of old plastered /concrete surface of ceiling and applying two coats of oil bound distemper emulsion, white or tinted upto height 10mtr including 3mm thick birla white putty (where as required ) necessary scaffolding etc complete all as specified and as directed. |
| 103 | Material and labour for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and as directed. |
| 104 | Supply and fix Aluminium composite panel, Metallic series of approved shade by GE as in ceiling/column at any position/shape upto height 10 mtr, the panel shall be of 4mm thick with combination of alluminium skin materials of 0.50mm thick alluminium sheet of alloy grade 1100 H cover material coated on external side with PVDF (Poly vinytedene floride) of KYNAR, PVDF coating containing 70% KYNAR 500 resign for antifungal and anti bacterial properties and the central core shall be natural polyethylene (LDPE and HDPE) bonded to alluminium skin on both sides cladding panel to be fixed with extruded alluminium basic frame with angle cleats, weather sealants, revits, GI brackets, \"C\" sections of size 50 x 25 x 1.5mm size as in wall cladding fabricated to panels of size as directed and including necessary corner cleats etc to accommodate aluminium composite panel fixed to masonry walls/concrete any other fabrications all as approved using suitable bolts on walls including necessary accessories, scaffolding, etc., complete for finished item of work and all as per manufacturer\"s instructions complete all as specified and as directed. NOTE :-(i) Anodised aluminium C section, GI brackets etc shall be measured and paid separately under respective items of this schedule.(ii) The quoted rate sahll be deemed to include execution of work for Height of building. |
| 105 | Supply and fix in repair PLEATED pleased blinds/Roller/Zebra type made of polyester fabric with aliminium coating at its back.Pleates of one inch with segments at the interval of not exceeding 100mm top and bottom channels made of aluminium in matching colour, cord lock and pully made of brass, design and type as approved by GE complete all as specified and as directed. |
