|
| 1 | Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc andremoval of entire debris as ordered outside MD land complete all as directed. |
| 2 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level and removalof entire debris as ordered outside MD land complete all as directed. |
| 3 | Demolition of cement concrete (un-reinforced) as in roof , floor (otherthan ground floor) , beams , staircase , chajjas etc and removalof entire debris as ordered outside MD land complete all as directed. |
| 4 | Demolition of cement concrete (un-reinforced) as in sunken floors any thickness& in any description includingremoval of entire debris as ordered outside MD land complete all as directed. |
| 5 | Demolition of brickwork , block masonryor stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of debris as ordered outside MD land complete all as directed. |
| 6 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness,in a height upto 9 Mts from floor levelincluding cover fillets complete all as specified and as directed |
| 7 | Dismantling structuralsteel workin cluding doors, gates but excluding framed truss etc.all as directed. |
| 8 | Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stackingserviceable tiles at site andremoval of entire debris as ordered outside MD land complete all as directed. |
| 9 | Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc., laid, bedded and pointed in any mortar ,stackingserviceable slbs at site andremoval of entire debris as ordered outside MOD land complete all as directed. |
| 10 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed. |
| 11 | All as per item 10here-in-above but exceeding 1.5 Sqm but not exceeding 4 Sqm each |
| 12 | Taking down shutter of any description n.exc 1Sqm eachand stacking at site where directed. |
| 13 | All as per item No 12 here-in-above but exceeding 1Sqm and not exceeding 2 Sqm each. |
| 14 | Taking down shutter of any description not exc 1 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed |
| 15 | All as per item No 14 here-in-above but exceeding 1Sqm and not exceeding 2 Sqm each. |
| 16 | Dismantling single layer mangalore pattern roof tiles including ridges laid and set in cement mortar complete all as directed. |
| 17 | Dismantling of ACCorrugatedor semi corrugatedsheet etcanythicknessincluding ridges as in roof covering and stacking at site where directedand removal of debris to a outside MOD land and depositing where directed complete all as directed. |
| 18 | Dismantling plain or corrugated steel sheeting in roof coverings including ridges, any gauge or thickness, complete all as specified and as directed |
| 19 | M & L for PCC1 :5 : 10 type E2 using 40 mm gradedcrushed stone aggregate as in foundation filling, sunken repairing &mass concrete complete all as specified and directed |
| 20 | M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in edges ofcoping includingnecessaryform workcomplete all as directed. |
| 21 | M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in edges ofcoping includingnecessaryform workcomplete all as directed. |
| 22 | M&L for Type B0 1:2:4 (12.50 mm graded crushed stone aggregate) providing cement concrete in roof kerbs or mud stops,rounded or chamfered on edges detc concrete mixed with integral water proofing admixture @ 200 ml per bag of cement I,e Shali plastLW+ or STP No-1 or equivalent &finished thesurface even and smooth with out using extra cement complete all as specified and as directed .( Note: WPC shall be measured and paid separately). complete all as specified and as directed. |
| 23 | Supply onlyIntegral liquid Water Proofing Compound (ISI Marked) of Make : CICO,Acco Proof, Impermo, Aqua flex as approved. |
| 24 | Supply onlyIntegral Water Proofing Compound (ISI Marked) of Make : CICO , Acco Proof , Impermo , Aqua flex as approved. |
| 25 | M&L for Brick work with well burnt best quality locally available bricks, old size bricks, straight or curved on plan to any radius built in any description in cement mortar 1:6 complete all as directed |
| 26 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:6complete all as specified & as directed. |
| 27 | S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed. |
| 28 | S& F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan |
| 29 | All sameas per item No 28 here-in-above but framesize 65 x 125 mm double rebate -do- |
| 30 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement. |
| 31 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 28 - 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 32 | S&F 28-30 mm thick Prelaminated WPC factory made 100%Sketon/Glased door (conforming as per IS-4020) made from 100% lead free single extruded on both side with wood grain texture andwith density not less than 650 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw holding capacity complete all as specified |
| 33 | M&L in repairfor 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work/hinges as in cupboard shutters, shelves, Kitchen cabinets etcwith & including necessary 19mm wide & 6mm thick Teak wood beading / edging / lipping fixed with nails to particle boardcomplete all as specified & as directed. |
| 34 | S&F 200 mm long mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified. |
| 35 | S & F 100 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed. |
| 36 | S&F125 mm size butt hinges, heavy weightcoldrolled mild steel and fixed . |
| 37 | S&F100 mm size butt hinges, medium weight coldrolled mild steel and fixed . |
| 38 | S&F100 mm long Butt hinges, extruded aluminium ally with galvanished mild steel hinge pin anodised and fixed type B-21 |
| 39 | S&F75 mm size butt hinges, medium weight coldrolled mild steel and fixed . |
| 40 | S&F 100 mm size aluminium alloy handles (ISI Marked) fabricated type anodisedand fixed. |
| 41 | S&F 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodisedand fixed. |
| 42 | S&F300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed. |
| 43 | Supply & fixing hasp and staple of size 125mm aluminium anodized safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified |
| 44 | S&F 250 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified. |
| 45 | S&F in repair 75mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door as directed.Note :- Door stopper shall be conforming to the sample kept in GE’s office. |
| 46 | S&Fin repairmild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate, welded to steel frame, including making suitable cut out in wall and making good in CM 1:4 complete all as specified & directed |
| 47 | S & Fin repair cast iron door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed |
| 48 | S&F in repair 25mm dia stainless steel curtain rod decorative type curtain rods.along withpair of steel finalebrackets fixed with plastic rawl plug &CP steel screws complete all as specified and as directed. |
| 49 | S&F anodized aluminium frame for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. |
| 50 | S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. |
| 51 | S&F stainlesssteel wire cloth0.36 mm nominal dia of wire and averagewidth of aperature 1.40mm and fixed with stainless steel wirestaples including supply & fix secondclass hard wooden fillet, wrought , cross sectional area exceeding 3 Sqcm but n.exc 6 Sq cm fixed with nails complete all as directed. |
| 52 | All sameas per item No 51 here-in-abovebut foraluminium .steel /wooden window / door including necessary wooden beading / iron staples / aluminium beading etc |
| 53 | S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, necessary welding etc. conforming to Grade E-250 quality ‘A’ all as specified and as directed. |
| 54 | S&F Mildsteel iron framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fit-tings (exclusive of steel sheeting or other cover-ing, running rails and guides) and hanging; al-so fastening and fixing complete all as directed . Steel conforming to Fe 410 -W (Gde E- 250 QualityA) |
| 55 | M&L framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 56 | S&F 4mm thicknon asbestos fibre cement building boards(one side embosed design) ceiling flat in ceiling with and including aluminium anodised snap Grid 605 x 605 mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles fixed to wall for ceiling incl necessary supporting hanger with 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm longfor securing frame work to ceiling suspended at 120cm etc. both way. (Size of grid shall be 605mm x 605mm) including 6mm thick buildingboardasdescribedfixing with clips etc. and finishedthe boardwithtwo coatsofdistemper overacoat ofprimerframe work and ceiling baord fixed as per manufacturerrs instructions complete alll as directed. (Note The quoted rate is deemed to be incluvise of non asbestosboard , aluminium snap grid , susupenders & distempering complete) |
| 57 | S & F 1.25mm thick mild steel, plain, black sheetin wall cladding, steel gates, etc., cut to size, holes punched including rounded headed screws, clout nails or revets and fixed to wood or steel framing or fixing to MS clamps with necessary bolts and nuts with plain 40mm lap joints welded to frameas directed. |
| 58 | Al same as per item No 57 here-in-above but fixed in repairs -do- |
| 59 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified & directed |
| 60 | Supply and fix Pre- painted galvalume aluminum zinc coating GI plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction all as specified and as directed. |
| 61 | M&L for Mangalore patternroof tiles interlocking at side joints laid dry including cutting holes through tiling for pipes and making good the disturbed surface to its original specification complete all as directed. |
| 62 | All as per itemNo 61 here-in-above but fixing only -do- ( Note: Servicable tiles obtained from itemNo 16 here-in-above). |
| 63 | M&L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed incement mortar 1:6 completeall as directed. |
| 64 | Material and labour for removal of any type of existing WPT course or any other kind of treatment surface over roof slab and cleaning ofsurface with wire brushes and water removing of unsolvent materials and depositing of the same outside MoD land and provide 10 mm thick screed bed/ bedding layer in CM 1:3 mixed with Water Proofing Compound (WPC) as per manufacturer instructions, including finishing the surface fair and even on RCC roof/ parapet once bedding layer of concrete is completely dried and apply oil bound bituminous primer @ 0.30 Kg/Sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160 gms/Sqm including minimum 10 cm side over laps and 15 cmend lap torch sealed and bonded as per detailed procedure as directed, apply a coat of blown grade hot bitumen 90/15grade over the membrance @1.2 Kg/Sqmand finally finished the top surface with solar reflective bituminious aluminium @0.20 ml/Sqmcomplete all as specified and as directed.Note: (i) The quoted rate is deemed to be inclusive of taking down & removal of debris , 10 mm thick 1:3 screed & complete any type of treatment. (ii) WPC will be paid seperately (iii)The work shall be carried out only through manufacturer or their authorised applicator and a written guarantee for work shall be submitted by the manufacturer for the effectiveness of WPT (iv) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. |
| 65 | M&L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base to floorcomplete all as directed. |
| 66 | M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in floor and finished the surface suitable to receivefloor tilescomplete all as directed. |
| 67 | M & L for 75 mm thick plain cement conctere 1: 3 : 6type C2 using 40 mm graded crushedstone aggregateas in plinth protection finished the surface fairand even complete all as directed. |
| 68 | M & L non-skid coloured joint freeceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11 but not exceeding 0.18 sqm (400x400)in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified. |
| 69 | All same as per item No 68here - in - above but each tile exceeding 0.06 Sqm butnotexceeding 0.11Sqm-do- |
| 70 | All same as per item No 68here - in - above but as in dado & skirting ( 400x150) with10 mm thick 1 : 4 cement mortar screed - do - |
| 71 | M&L glazed ceramic coloured tiles of size 350mm x 250mmx 7mm / 450mmx350mmx7mm thick, on verticals surfaces, set and jointed inneat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to matchcompleteall directed.(Note for item Nos 68 to 71 : i) Quoted rateis deemed to be inclusive of cement screed. ii) Colour of tiles shall be got appproved before incorporation in the work) |
| 72 | M&L Machine pressed coloured chequered cement concrete tiles of size 200x200x25 mm thick (confirming to IS: 13801-1993 and shall contain ISI mark) machine pressed with grey cement and pigments, set and jointed in neat cement slurry in floors and pointed with coloured cement to match the shade and laying on 15 mm thick screed bed in CM 1:6 complete all as specified.(Note : i) Quoted rate is deemed to be inclusive of cement screed. ii) Colour of tiles shall be got appproved before incorporation in the work) |
| 73 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , laid over andincluding15 mm thick screed bedding in cement mortar 1 : 6 all as specified & directed.(Note: Quoted rateis deemed to be inclusive of cement screed.) |
| 74 | M&L for 20-25mm thick machine cut cudappah stone slab 20-25mm thickas in flooringlaid over andincluding15 mm thick screed bedding in cement mortar 1 : 6 , laid and jointedwith grey cement slurry mixed with pigment to match the shade of the slab including rubbingand machine polishing complete all as directed. |
| 75 | M&L for rendering 15 mm thick in CM 1:4 on brick or concrete surfaces or surface other than fair faces brick work, finished even and smooth without using extra cement complete all as specified. |
| 76 | M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair face of brick work of walls, and finished the surface finished even & smooth without using extra cement, complete all as specified. |
| 77 | M&L for rendering 15 mm thick in CM 1:3 onbrick or concrete surfacemixed withWPC as per manufacturers instructions &finished the surface fair & evencomplete all as specified.(Note: WPC measured & paid seperately). |
| 78 | M&L preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as directed. |
| 79 | M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 3 mm thick white cement based wall care putty as ordered complete all as specified. |
| 80 | Hacking out old broken glass (any thickness) and size from wooden frame glazed with putty or fixed with wooden beads in a height upto 13 Mts from Ground leveland removal of entire debris as ordered outside MD land complete all as directed. |
| 81 | All same as per item No 80 here-in-above butfrom metal frame including punching or drilling out old glazing pins/springclipsandprovidingand fixing new ones -do- (Note foritemNo 81 & 82 : Quoted rate isdeemedtobe inclusive forworkingin above height). |
| 82 | S&F plain sheet glass 3 mm thick selected quality and glazing with beading and rubber gasket not exc 0.5 sqm in each pane in a height upto 13 Mts from Ground level.(Note: Quoted rate isdeemedtobe inclusive forworkingin above height). |
| 83 | S&F plain sheet glass 5 mm thick tinted selected quality and glazing with beading and rubber gasket exc 0.5 sqm fixed to aluminium door / windows / ventilatorscomplete all as directed. |
| 84 | M & L Two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed. |
| 85 | M & Lfor Two coats oftwo coats of aluminium paint over a coat of aluminium oxide primer over any description of new steel surface over 10 cm in width or girth including necessary preparation ofnew steel surface complete all as directed. |
| 86 | M & Lfor Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation ofnew steel surface complete all as directed. |
| 87 | One coat of aluminium paint of any description over 10 cm in width or girth on old painted steel surface after necessary preparation of surface complete all as directed. |
| 88 | Taking down old rusted / wornout 15 mm bore GI tubing after necessary disconnection & S&F new 15 mm boresteel water tubingmedium grade (ISI marked) with fittings all new (ISI marked) fixed to wall and ceiling or laid in floors making necessary connection& testing on completion complete all as directed. |
| 89 | Taking down old rusted / wornout 20 mm bore GI tubing after necessary disconnection & S&F new 20 mm boresteel water tubingmedium grade (ISI marked) with fittings all new (ISI marked) fixed to wall and ceiling or laid in floors making necessary connection& testing on completion complete all as directed. |
| 90 | S&F in repairs 15mm Bib taps chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for union. |
| 91 | S&Fin repair stop cocks 15 mm bore,chromium plated , fancy type screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions . |
| 92 | S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated,screwed down high pressure, with or without lettered‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes |
| 93 | S&F in repair20 mm size Gun metalglobe or gate valves(ISI Marked) conformingtoIS 778 : 1984 with iron wheelhead screwed box and both ends for iron pipeor union complete all as directed |
| 94 | All sameas per item No 93 here-in-above but 15 mm size valves -do- |
| 95 | S&Fin repairs ball brass valves with brass rod, high pressure with polythelene float and fly nut complete, screwed for iron pipe or for brass ferrule of 15 or 20mm dia. |
| 96 | S&Fin repairsPVC connection 15 mm bore size with PTMT nuts and PVC washers of length 600 mm. |
| 97 | S & F in repairs PVC 40 mm pipe with all necessary bends & fixed complete to walls or laid in floors. |
| 98 | S & F in repairs chromium plated health faucet(ABS) with 1.25 metre long flexible pipe suitable for 15mm bore pipe complete all as specified and directed. |
| 99 | S&F 550 mm X 400 mm size white flat backvitreous china wash hand basin including chromium plated pillar tap cap stain head suitable for 15 mm bore of pipe , PVC connection 15 mm dia 45 cm long with chromium plated nuts and bolts and suitablewashers, PVC waste 32 bore CP waste coupling chain and plug , porcelain stopper including CI bracket fixed in repair complete all as diirected. |
| 100 | S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, ‘P’ or ‘S’ trap, including connection to trap and flushing pipe, antisyphonage pipe etcincluding provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified |
| 101 | S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low levelPVC Flushing cistern,complete including making good damaged/disturbed surfaces complete all as specified and directed. Make of Pan CERA Cat No S1053101/S1053102 and of cistern B1010109 or equivelent of Parryware/Hindware/Prayag |
| 102 | S&F in repair sinksmade of stainless steel ( gde 304) 1mm thick kitchen or laboratory with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe (heavy duty ) 90 cm long, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets & overall size (Approximate) 915mm x 460mmx203mm bowl size 410mm x 330mmx203mm Make :Nirali, Elegance(regular) Rangeequivelent ofPRAYAG /Diamond |
| 103 | S&F in repairs 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyetyleneof low or high density or 32 mm dia PVC connection pipe complete all as directed. |
| 104 | Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site andS&F new 1000 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical verticalwith close top) triple layer colour white both inside and outside with top cover including PVC float valve high pressure suitable for 25 mm bore of pipe with polythene float, fixture hoisted and fixed in position where orderedand making necessary connection and testing complete all as directed. |
