Name of Work: Internal painting toQtr B6 (Type-IV) at staff quarters compound, Banjara Hills, Hyderabad
Sl. No.
Item Description
1
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
2
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
3
One coat
4
Two coats
5
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
6
One or more coats on old work.
7
Finishing walls with Acrylic Smooth exterior paint of required shade :
8
Old work (One or more coat applied @ 0.90 ltr/10 sqm).
9
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
10
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.
11
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
12
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge.
13
With cement mortar 1:4 (1 cement : 4 fine sand).
14
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
