|
| 1 | Design, Fabrication, supplying and erection of 8 mtr long hot dip Galvanized Octagonal hot dip pole with BSEN 10025 grade S355 JO steel plate for shaft, IS2062 for base plate with door arrangements, including suitable boards, Bakelite sheet, heavy terminals and 2 nos., 6A DP MCBs as per IS specificationssuitable to withstand the wind speed of 47 m/s for 8m pole in single section and single joint welded as per IS9595/IS10178aws having dimensions bottom 135mm, top 70mm with 3mm thick, suitable base plateand 4 nos of M20x750mm long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc. |
| 2 | Supplying and fixing of Hot dip Galvanized M.S. Bracket suitable for outdoor Luminaries and mounted on octagonal pole using necessary bolts, nuts etc., complete.a) Single Arm Bracket with 1500mm Standard 40/50mm dia |
| 3 | Supplying and fixing of Hot dip Galvanized M.S. Bracket suitable for outdoor Luminaries and mounted on octagonal pole using necessary bolts, nuts etc., complete.b) Double Arm Bracket with l500mm Standard 40/50mm dia |
| 4 | Providing foundation for 8 mtrs octagonal pole including Earth Excavation and making of RCC foundation using M20 concrete, steel reinforcement, shuttering complete as per pole suppliers approved foundation drawing or depending upon site condition. |
| 5 | Supply and drawing of 3Cx2.5sqmm PVC insulation, sheathed flexible Multicore copper from marshalling box to fittings. |
| 6 | Supplying of 1.1KV LT UG cable XLPE insulated, PVC extruded inner sheath armoured UG cable as per IS having aluminium conductor galvanized, steel wire/ tape armoured cable with PVC outer sheathing 1.1 KV class. 4Cx16 Sq.mm. |
| 7 | Labour charges for laying of 1.1KV class ug cable in existing trench/Hume pipe/on wall as required.4C x 16 Sq.mm |
| 8 | Earth excavation for cable trench 0.5mtr width and depth 0.6mtr, refilling the trench and consolidating the soil and depositing of surplus earth with a lead of 200 mtrs etc. complete.In hard soil |
| 9 | Cutting of road for cable trenches and depositing of the excavated earth as directed barricading and refilling the cable trenches.Tar road |
| 10 | Cutting of road for cable trenches and depositing of the excavated earth as directed barricading and refilling the cable trenches.CC Road |
| 11 | Supplying and laying Double walled corrugated DWC HDPE pipe as per IS 14930 part II with necessary connecting sockets, couplings, Tees, bends, End - caps of suitable materials in existing trench/duct / on wall/on black stone/ concrete wall supply and fixing DWC pipe with Aluminium saddles and stainless steel screws as required for drawing the cableas complete job. 40mm OD/32mm ID. |
| 12 | Supplying and making end termination with glands, lugs of LT cable.4C x 16 Sq.mm |
| 13 | Supplying and laying of NP2 RCC Hume pipe of 200mm dia with required collars. |
| 14 | Providing and laying in position plain cement concrete of mix M20 with cement @320kg with 20mm and down size graded granite metal coarse aggregates @ 0.873 cum fine machine mixed concrete laid in layers not exceeding 15cms thick, well compacted including cost of labour, HOM of machinery curing complete. |
| 15 | Supply of LED streetlight luminaire with pressure are cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output rated life Burning Hrs. 5000 hrs @Lumen Maintenance of maximum light intensity should be between 60 degree to 70 degree. CCT>5500k, IP66 optical and electrical compartment & impact resistance of complete luminaire>IK08. Power factor>0.9 with mains, Surge Protection -Min 5KV along with Over voltage /Overload/Short circuit protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V, 50/60Hz application. Compliance to IS 10322/lEC 60598, LM 79 & LM BO Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location minimized minimal tools. LED Light fixture with 150W System power consumption. LED Efficiency>130lm/w, nominal CRI>75. Luminaire manufacture should have accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified ISO 9001:2008. Housing with Supplier word mark/name shall be Engraved/Embossing on the die cast housing/Body part. Warranty of 2 years against any manufacturing defect.LED Street light 150W |
| 16 | Fixing of 150W LED street light fittings and wiring with 3Cx2.5 Sq.mm PVC flexible copper wire and complete. |
| 17 | Supply and fixing of Spiral earthing Electrode as per standard technical specifications as per ESCOM. |
| 18 | Supplying and fixing of cable route marker (RCC) “NMPT HT/LT Cable” of size 1000mm(H)x500mm(W)x60mm(D) with yellow paint and red colour letters. |
| 19 | Supplying and fixing of street light timer box of size 300x600x170mm made of thermoplastic modular panel with Iid, shock proof, IP65 having internally embedded gasket on both lid and flap with hylum sheet, din rail with 10 sq.mm copper wire as complete and consisting of following components, a) 63ATPN MCB - 1 No.b) MNX 40A 4-pole Contactor -1 No.c) 32A TPN MCB – 2 Nos. d) 24Hrs Time switch - 1 No.e) 40A Connectors -10 Nos. |
| 20 | Removing and releasing of ACSR conductors - 600mtrs, clamps, RCC poles- 20 Nos., and other materials and transporting to Sub Division-III premises. |
