|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm indepth,1.5m in width as well as10 sqm on plan) including getting out and disposal of excavated earth lead up to 50m and lift up to 1.5m, as directed by Engineer-in-charge Ordinary rock |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth. Consolidating each deposited layer by ramming and watering lead upto 50m and lift |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) for base concrete and plinth protection |
| 4 | Centering and shuttering including strutting, propping, etc. and removal of form for Walls (any thickness) |
| 5 | Centering and shuttering including strutting, propping etc., and removal of form work for flooring |
| 6 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete-TMT bars |
| 7 | Providing and laying in position machine batched (RMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering, finishing and reinforcement including water proofing compound, admixtures in recommended proportions and pumping of laying curing.(as per IS 9103) to accelerate, retard setting of concrete improve workability without impairing strength and durability as per directions M-25 grade reinforced cement concrete for floors (including hunch) |
| 8 | Providing and laying in position machine batched (RMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering, finishing and reinforcement including water proofing compound, admixtures in recommended proportions and pumping of laying curing.(as per IS 9103) to accelerate, retard setting of concrete improve workability without impairing strength and durability as per directions M-25 grade reinforced cement concrete for walls |
| 9 | Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and enamel paint of Asian paints all complete |
| 10 | Providing and fixing precoated galvanized steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete as per approved sample for roof |
| 11 | Providing Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster |
| 12 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers as per approved brand and manufacture |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Asian Tractor / Jonson Nicholson / Berger) |
| 14 | Providing and fixing stainless steel insect proof mesh as per approved sample with all fixtures, bolts, nuts, washers aluminum strips, etc complete as per directions |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Asian Tractor / Jonson Nicholson / Berger) |
| 16 | Providing and constructing concrete block masonry using 150x200x400 mm solid core compact concrete block (Grade C – 50Kg/Cm2 ) in CM 1:6 including all scaffolding, curing, etc. complete |
| 17 | Supplying and laying fixing half cut RWH PVC pipes (6kg/cm2-ISI Finolex / Supreme/ Kisan/ Prince/ Canara) with all required pipe also to route the RWH to sump tank collars, bends, elbows, tees, sockets, bush pvc solvent etc., complete |
| 18 | Supplying, fixing, connecting & commissioning of 05 HP 3 Phase, Horizontal Submersible type pump set ( ISI - KSB, Lubi, Texmo, Cromton Greaves) |
| 19 | Supplying, fixing and connecting 05 HP capacity outdoor control panel box of suitable size with 3 phase main switch of 3 phase 05 HP outdoor control panel for Pump set with complete accessories (Like MCB, Single Phase Preventer and Auto starter) & foot vale, control valve, indicator lights etc., complete as per directions |
| 20 | 4 sq mm 3 core PVC flat submersible cable 1100 V – Finolex (ISI) / Cobra / Anchor |
| 21 | Supplying and laying DWC pipe as per approved sample 50 mm |
