|
| 1 | M 1055 - PUMPSSupplying submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. |
| 2 | Submersible Pump set 100 mm dia (with Polypropylene/ Noryl Impeller) up to 20 stages1 H.P. |
| 3 | 1.5 HP |
| 4 | 2.5 HP |
| 5 | 3.0 HP |
| 6 | 4.0 HP |
| 7 | 5.0 HP |
| 8 | Supply rate should be increased by Rs.__________per stage for pump with more than 20 stages ( Please Quote ) |
| 9 | Submersible Pump 150 mm dia (with Bronze/SS impeller) up to 8 stages |
| 10 | 1.5 HP |
| 11 | 2.0 HP |
| 12 | 3.0 HP |
| 13 | 4.0 HP |
| 14 | 5.0 HP |
| 15 | 6.0 HP |
| 16 | 7.5 HP |
| 17 | M 1056 - Pressure GuageProviding fabricating, testing and commisioning pressure vessel fabricating in M.S plate on providing foundation including epoxy paint |
| 18 | Pressure gauge (100 mm dia) |
| 19 | Pressure gauge (150 mm dia) |
| 20 | Vacuum / Combination gauge |
| 21 | M 1057 - Lifting EquipmentChain pulley BlockSupplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark. |
| 22 | 1 Tonne Capacity |
| 23 | 2 Tonne Capacity |
| 24 | 3 Tonne Capacity |
| 25 | Electric operated Circular or Rectangular Travelling Crane (Single Girder)Supplying single girder Electrically Operated Rectangular Over head Travelling Crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendant control block. |
| 26 | 5 Tonne Capacity |
| 27 | Above 6 m up to 8 m span |
| 28 | Above 8 m up to 10 m span |
| 29 | 7.5 Tonne Capacity |
| 30 | Above 6 m upto 8 m span |
| 31 | Above 8 m up to 10 m span |
| 32 | 10 Tonne Capacity |
| 33 | Above 6 m up to 8 m span |
| 34 | Above 8 m up to 10 m span |
| 35 | M 1058 - Lightening Arrester, AB Switch, Insulators |
| 36 | Lightening ArrestorSupplying, erecting approved make thyrite type Lightening Arrestor suitable for H.T. supply with necessary ancillary material complete on provided cross arm and connected to overhead line. |
| 37 | Suitable for 11 kV Supply, Distribution class |
| 38 | Suitable for 22 kV Supply, Distribution class |
| 39 | Suitable for 33 kV Supply, Station class |
| 40 | Disc Insulator.Supplying, erecting porcelain Disc Type Insulators with hardware fittings suitable for H.T. overhead line complete erected with nuts and bolts on provided cross arm |
| 41 | Suitable for 11KV line |
| 42 | Suitable for 33KV line |
| 43 | Pin InsulatorSupplying, erecting porcelain Pin Type Insulators with hardware fittings suitable for H.T. overhead line complete erected with nuts and bolts on provided cross arm |
| 44 | Suitable for 11KV line |
| 45 | Suitable for 33KV line |
| 46 | Air break switch without Earth switchSupplying, erecting approved make H.T. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground with necessary clamps |
| 47 | Suitable for 11KV line |
| 48 | Rocking / Tilting type |
| 49 | Rotating type |
| 50 | Suitable for 33KV line |
| 51 | Rocking / Tilting type |
| 52 | Rotating type |
| 53 | Air break switch with Earth switchSupplying, erecting approved make H.T. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground with necessary clamps |
| 54 | Suitable for 11 KV line |
| 55 | Rotating Type |
| 56 | Suitable for 33 KV line |
| 57 | Rotating type |
| 58 | Drop out Fuse (channel mounted)Supplying, erecting approved make out door type Drop out fuse channel type with insulator complete with fuse holders fuse barrel with metal fittings, fuse element, with working current up to 50 Amp, capacity complete erected on provided cross arm, each set comprising 3 units |
| 59 | Suitable for 11 KV line |
| 60 | Suitable for 33 KV line |
| 61 | Horn gap fuse (channel mounted) Supplying, erecting approved make out door type Horn gap type fuse with insulator, fuse element, with working current up to 50 Amp, capacity complete erected on provided cross arm, each set comprising 3 units |
| 62 | Suitable for 11 KV line |
| 63 | Suitable for 33 KV line |
| 64 | M 1059 - TransformerPower Transformer (with off load Tap changer) Any ISI Mark |
| 65 | Supplying outdoor type copper wound transformer continuously rated for 3Ph, 50 Hz, at full load and temp. rise not exceeding 45 degree C by thermometer in oil and 50 degree C by the resistance in winding after continuous run at full load rating, the transformer should have oil immersed winding having vector group DY11, HT side connected in delta and LT side connected in star with neutral brought out connected to provide separate earthing. The Transformer shall have power terminal arrangement, bushing/ cable end box on HT side and cable end box on LT side. 2 Nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. The transformer should have following standard fittings. Transformer shall be latest manufacturing standards as per amended IS specifications and the load & No load losses shall be limited to the values given below or as per IS or Norms issed by SEB which ever are lower-1. Oil conservator with filling hole with cap and plain oil level gauge.2. Silica gel dehydrating breather charged with silica gel.3. Oil drain valve4. Oil filter valve5. Lifting eyes/ hooks6. Two earthing terminals7. Diagram and rating plate8. Air vent9. Explosion vent10. 100mm dia thermo meter with thermometer pocket11. Four bi directional plain roller. |
| 66 | Power Transformer 11000/433 volts With off load Tap Changer – 12.5% to +2.5% in steps of 2.5% as per BIS Level-2. |
| 67 | 63 KVA |
| 68 | 100 KVA |
| 69 | 160 KVA |
| 70 | 200 KVA |
| 71 | 250 KVA |
| 72 | 315 KVA |
| 73 | 500 KVA |
| 74 | 630 KVA |
| 75 | 750/800 KVA |
| 76 | Power Transformer (with on load Tap changer)Supplying outdoor type copper wound transformer continuously rated for 3Ph, 50 Hz, at full load and temp. rise not exceeding 45 degree C by thermometer in oil and 50 degree C by the resistance in winding after continuous run at full load rating, the transformer should have oil immersed winding having vector group DY11, HT side connected in delta and LT side connected in star with neutral brought out connected to provide separate earthing. The Transformer shall have power terminal arrangement, bushing/ cable end box on HT side and cable end box on LT side. 2Nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. The transformer should have following standard fittings. The OLTC should be suitable for minimum 50 operations per day. Transformer shall be latest manufacturing standards as per amended IS specifications and the load & No load losses shall be limited to the values given below or as per IS or Norms issued by SEB which ever are lower- |
| 77 | 1. Oil conservator with filling hole with cap and plain oil level gauge.2. Silica gel dehydrating breather charged with silica gel.3. Oil drain valve4. Oil filter valve5. Lifting eyes/ hooks6. Two earthing terminals7. Diagram and rating plate8. Air vent9. Explosion vent10. 100mm dia thermo meter with thermometer pocket11. Four bi directional plain roller.12. Buchholz relay13. Resistance Temp. detector14. Marshalling box15. Automatic Voltage Regulator (AVR)16. Remote Tap Changing Controller (RTCC) |
| 78 | Transformer 11000/433 volts With on load Tap Changer – 15% to +5% in steps of 1.25% with RTCC, AVR and marshalling box and other specification |
| 79 | 750/800 KVA |
| 80 | 1000 KVA |
| 81 | 1250 KVA |
| 82 | 1600 KVA |
| 83 | 2000 KVA |
| 84 | M 1060 - MOTORSFoot Mounted Motors TEFC 1500 RPM Supplying Foot Mounted TEFC 1500 RPM, squirrel cage induction motor, conforming to IS 325 having continuous rating suitable for operation at 415 volts ± 10%, 3 Phase, 50 HZ ± 3% with “F” class insulation temperature rise limited to class “B” insulation. Motors conform to IS-12615 with efficiency level IE3 and provided with enclosure protection class IP-55. |
| 85 | 15 KW (20 HP) |
| 86 | 18.5 KW ( 25 HP) |
| 87 | 22 KW ( 30 HP) |
| 88 | 30 KW ( 40 HP) |
| 89 | 37 KW ( 50 HP) |
| 90 | 45 KW ( 60 HP) |
| 91 | 55 KW ( 75 HP) |
| 92 | 75 KW ( 100 HP) |
| 93 | 90 KW ( 120 HP) |
| 94 | 110 KW ( 150 HP) |
| 95 | 132 KW ( 180HP ) |
| 96 | 160 KW ( 215 HP ) |
| 97 | M 1061 - Aluminium CableCABLE - Aluminium conductor three core, XLPE / PVC insulated & armoured cable .Supplying XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner. |
| 98 | 3 core 2.5 sq mm |
| 99 | 3 core 4 sq mm |
| 100 | 3 core 6 sq mm |
| 101 | 3 core 10 sq mm |
| 102 | 3 core 16 sq mm |
| 103 | 3 core 25 sq mm |
| 104 | 3 core 35 sq mm |
| 105 | 3 core 50 sq mm |
| 106 | 3 core 70 sq mm |
| 107 | 3 core 95 sq mm |
| 108 | 3 core 120 sq mm |
| 109 | 3 core 150 sq mm |
| 110 | 3 core 185 sq mm |
| 111 | 3 core 240 sq mm |
| 112 | 3 core 300 sq mm |
| 113 | 3 core 400 sq mm |
| 114 | HT Aluminium three core 3.3 KVE cable XLPE insulatedSupplying HT Aluminium three core cable XLPE insulated ,insulation screened with extruded semi conducting compound in combination with copper tape (0.3 kA for 1 sec.) cores laidup inner sheath of PVC tape ,galvanised steel flat strip armoured,and overall PVC sheathed cable conforming to IS :7098 /II/85 with latest amendments |
| 115 | 3 core 70 sq mm |
| 116 | 3 core 95 sq mm |
| 117 | 3 core 120 sq mm |
| 118 | 3 core150sq mm |
| 119 | 3 core 185 sq mm |
| 120 | 3 core 240sq mm |
| 121 | 3 core 300 sq mm |
| 122 | 3 core 400 sq mm |
| 123 | M 1062 - COPPER CABLECABLE |
| 124 | 3 Core PVC insulated, PVC sheathed copper conductor flat submersible cable .Supplying , Flat flexible submersible cable with, copper conductor, PVC insulated, and PVC sheathed . |
| 125 | 3 core 1.5 sq mm |
| 126 | 3 core 2.5 sq mm |
| 127 | 3 core 4 sq mm |
| 128 | 3 core 6 sq mm |
| 129 | 3 core 10 sq mm |
| 130 | 3 core 16 sq mm |
| 131 | 3 core 25 sq mm |
| 132 | 3 core 35 sq mm |
| 133 | Copper conductor three core, XLPE / PVC insulated & unarmoured cable Supplying XLPE / PVC insulated, unarmoured cable 1100 V grade with ISI mark Three core, solid / stranded copper conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner. |
| 134 | 3 core 1.5 sq mm |
| 135 | 3 core 2.5 sq mm |
| 136 | 3 core 4 sq mm |
| 137 | 3 core 6 sq mm |
| 138 | 3 core 10 sq mm |
| 139 | 3 core 16 sq mm |
| 140 | 3 core 25 sq mm |
| 141 | 3 core 35 sq mm |
| 142 | 3 core 50 sq mm |
| 143 | 3 core 70 sq mm |
| 144 | 3 core 95 sq mm |
| 145 | Copper conductor 3.5 core, XLPE / PVC insulated & armoured cable .Supplying XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner |
| 146 | 3.5 core 25 sq mm |
| 147 | 3.5 core 35 sq mm |
| 148 | 3.5 core 50 sq mm |
| 149 | 3 .5 core 70 sq mm |
| 150 | 3.5 core 95 sq mm |
| 151 | 3.5 core 120 sq mm |
| 152 | 3 .5 core150sq mm |
| 153 | 3.5 core 185 sq mm |
| 154 | 3.5 core 240sq mm |
| 155 | 3.5 core 300 sq mm |
| 156 | 3.5 core 400 sq mm |
| 157 | copper conductor 3.5 core XLPE/PVC unarmouredSupplying XLPE / PVC insulated, unarmoured cable 1100 V grade with ISI mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner. |
| 158 | 3.5 core 25 sq mm |
| 159 | 3.5 core 35 sq mm |
| 160 | 3.5 core 50 sq mm |
| 161 | 3.5 core 70 sq mm |
| 162 | 3.5 core 95 sq mm |
| 163 | 3.5 core 120 sq mm |
| 164 | 3.5 core150sq mm |
| 165 | 3.5 core 185 sq mm |
| 166 | 3.5 core 240sq mm |
| 167 | 3.5 core 300 sq mm |
| 168 | 3.5 core 400 sq mm |
| 169 | Copper conductor three core, XLPE / PVC insulated & armoured cable .Supplying XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Three core, solid / stranded copper conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete in an approved manner. |
| 170 | 3 core 1.5 sq mm |
| 171 | 3 core 2.5 sq mm |
| 172 | 3 core 4 sq mm |
| 173 | 3 core 6 sq mm |
| 174 | 3 core 10 sq mm |
| 175 | 3 core 16 sq mm |
| 176 | 3 core 25 sq mm |
| 177 | 3 core 35 sq mm |
| 178 | 3 core 50 sq mm |
| 179 | 3 core 70 sq mm |
| 180 | 3 core 95 sq mm |
| 181 | 3 core 120 sq mm |
| 182 | 3 core 150sq mm |
| 183 | 3core 185 sq mm |
| 184 | 3 core 240 sq mm |
| 185 | 3 core 300 sq mm |
| 186 | 3 core 400 sq mm |
| 187 | M 1063 - FOOT VALVESupplying C.I. foot valve having single leather flap and gunmetal seating. Valve shall be fixed on suction side of pump as per requirement including jointing material and hardware. |
| 188 | Flanged type |
| 189 | 50 mm |
| 190 | 65 mm |
| 191 | 80 mm |
| 192 | 100 mm |
| 193 | 125 mm |
| 194 | 150 mm |
| 195 | M 1064 - Air Circuit BreakerACB breaking capacity 50kA Thermal Magnetic Manual draw Out type 3 pole |
| 196 | 1000A |
| 197 | 1250A |
| 198 | 1600A |
| 199 | 2000A |
| 200 | M 1065 - STARTERD.O.L. starter with SS Enclosure with 380/415 Volt coil |
| 201 | 5 TO 10 HP |
| 202 | Supplying Fully automatic star delta starter to operate induction motor working on 415v,3phase,50 hz with no volt coil, Over load element, ON-OFF push buttons, with necessary materials and connected to supply, etc complete starter with original sheet steel encloserF.A.S.D starter |
| 203 | 10 HP |
| 204 | 20 HP |
| 205 | 25 HP |
| 206 | 40 HP |
| 207 | 50 HP |
| 208 | 75 HP |
| 209 | 100 HP |
| 210 | 125 HP |
| 211 | 150 HP |
| 212 | 250 HP |
| 213 | M 1066 - Servo Controlled Automatic Voltage StabilizerProviding, erecting Servo Controlled Automatic Voltage stabiliser suitable for out put voltage of 415 Volt ± 1%, 3 Ph, 50 Hz, with copper wound transformer (air/oil cooled) as mentioned below. The stabilizer shall function satisfactorily even if incoming supply is unbalanced between phases within range of 10%. The stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling, necessary monitors and user\"s controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and out put voltage, Auto/Manual selector switch, Raise/Low push buttons etc. Suitable capacity termination strips and bus bars for incoming and out going cable should be provided. All three phases shall be independently monitored and corrected. Following protections and indications shall be incorporated Over Voltage / Under Voltage Single Phasing Cut off contactor with electronic output sensing unit |
| 214 | Servo Controlled Automatic Voltage Stabiliser(Out put 415 ± 1%) Input 150 / 220 to 450 / 460 Volt |
| 215 | 30 kVA Air cooled |
| 216 | 40 kVA Air cooled |
| 217 | 50 kVA Oil cooled |
| 218 | 60 kVA Oil cooled |
| 219 | 75 kVA Oil cooled |
| 220 | 100 kVA Oil cooled |
| 221 | 125 kVA Oil cooled |
| 222 | Servo Controlled Automatic Voltage Stabiliser (Out put 415 ± 1%) Input 280 to 450/460 Volt |
| 223 | 15 KVA Air cooled |
| 224 | 20 KVA Air cooled |
| 225 | 30 KVA Air cooled |
| 226 | 40 kVA Air cooled |
| 227 | 50KVA Air cooled |
| 228 | 60 KVA Oil cooled |
| 229 | 75KVA Oil cooled |
| 230 | 100 KVA Oil cooled |
| 231 | 125 kVA Oil cooled |
| 232 | 150 KVA oil cooled |
| 233 | 200KVA oil cooled |
| 234 | M 1067 - Termination kitProviding and errecting IN-DOOR type termination kit, for 3.3kV/ 6.6 kV / 11kV/ 22kV/33kV XLPE Screened 3 core cable |
| 235 | IN-DOOR Termination KIT for 3.3kV(E/UE) / 6.6 kV(E) XLPE 3 core cable |
| 236 | 25-50 mm² |
| 237 | 70-120 mm² |
| 238 | 150-185 mm² |
| 239 | 240-400 mm² |
| 240 | OUT-DOOR Termination KIT for 3.3(E/UE)/6.6 KV(E) XLPE 3 core cable |
| 241 | 25-50 mm² |
| 242 | 70-120 mm² |
| 243 | 150-185 mm² |
| 244 | 240-400 mm² |
| 245 | Straight through Joint for 3.3KV(E/UE)/ 6.6 KV(E) XLPE 3 core cable |
| 246 | 25-50 mm² |
| 247 | 70-120 mm² |
| 248 | 150-185 mm² |
| 249 | 240-300 mm² |
| 250 | IN DOOR Termination KIT for 11KV(E) XLPE Screened 3 core cable |
| 251 | 25-50 mm² |
| 252 | 70-120 mm² |
| 253 | 150-185 mm² |
| 254 | 240-400 mm² |
| 255 | OUT DOOR Termination KIT for 11KV(E) XLPE Screened 3 core cable |
| 256 | 25-50 mm² |
| 257 | 70-120 mm² |
| 258 | 150-185 mm² |
| 259 | 240-400 mm² |
| 260 | Straight through Joint for 11 KV(E) XLPE Screened 3 core cable |
| 261 | 25-50 mm² |
| 262 | 70-120 mm² |
| 263 | 150-185 mm² |
| 264 | 240-300 mm² |
| 265 | IN DOOR Termination KIT for 22KV(E) XLPE Screened 3 core cable |
| 266 | 25-50 mm² |
| 267 | 70-120 mm² |
| 268 | 150-185 mm² |
| 269 | 240-400 mm² |
| 270 | OUT DOOR Termination KIT for 22KV(E) XLPE Screened 3 core cable |
| 271 | 25-50 mm² |
| 272 | 70-120 mm² |
| 273 | 150-185 mm² |
| 274 | 240-400 mm² |
| 275 | Straight through Joint for 22 KV(E) XLPE Screened 3 core cable |
| 276 | 25-50 mm² |
| 277 | 70-95 mm² |
| 278 | 120-150 mm² |
| 279 | 185-240 mm² |
| 280 | 300-400 mm² |
| 281 | IN DOOR Termination KIT for 33KV(E) XLPE Screened 3 core cable |
| 282 | 25-50 mm² |
| 283 | 70-95 mm² |
| 284 | 120-185 mm² |
| 285 | 240-400 mm² |
| 286 | OUT DOOR Termination KIT for 33 KV(E) XLPE Screened 3 core cable |
| 287 | 25-50 mm² |
| 288 | 70-95 mm² |
| 289 | 120-185 mm² |
| 290 | 240-400 mm² |
| 291 | Straight through Joint for 33 KV(E) XLPE Screened 3 core cable |
| 292 | 35-70 mm² |
| 293 | 95-150 mm² |
| 294 | 185-240 mm² |
| 295 | 240-300 mm² Please Enable Macros to View BoQ information |
