|
| 1 | MGNREGS Materials Works |
| 2 | Coarse sand (zone III) |
| 3 | Portland Cement |
| 4 | Quarry Waste |
| 5 | Single clip |
| 6 | Stone Aggregate(single size): 10 mm nominal size |
| 7 | Stone Aggregate(single size):20 mm nominal size |
| 8 | Stone for masonry work |
| 9 | Twisted steel/deformed bars |
| 10 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 11 | Hire charges of Diesel Road Roller- 8 to 10 tonne |
| 12 | Vibrator (Needle type 40 mm) |
| 13 | wall form panel 1250x500 mm |
| 14 | Corner angle 45x45x5 mm 1.50 m long |
| 15 | Diesel oil |
| 16 | Double clip (bridge clip) |
| 17 | M.S. Tube 40 mm dia |
| 18 | 100 mm channel shoulder 2.5 m long |
| 19 | Portland Cement |
| 20 | Coarse sand (zone III) |
| 21 | Laterite stone of size 35x20x20cm |
| 22 | Structural steel such as tees, angles, channels and R.S. joists |
| 23 | Red oxide Zinc chromate primer |
| 24 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 25 | Beam clamp 300-380 mm (450-1070 mm) |
| 26 | Stone Aggregate(single size):20 mm nominal size |
| 27 | Stone Aggregate(single size): 10 mm nominal size |
| 28 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 29 | Vibrator (Needle type 40 mm) |
| 30 | Twisted steel/deformed bars |
| 31 | Stone Aggregate(single size): 40 mm nominal size |
| 32 | Mild steel tubes hot finished welded type |
| 33 | Welding by electric plant |
| 34 | GI trafford profile sheet 0.35mm thick |
| 35 | Bitumen washer |
| 36 | Stainless steel screws 50 mm |
| 37 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
| 38 | Wire nails |
| 39 | Mild steel sheets for tanks |
| 40 | Iron pintels including weldded pin |
| 41 | Mild steel sheets with bolts and nuts to rest on pintels |
| 42 | Mild steel hooks |
| 43 | Flats up to 10 mm in thickness |
| 44 | Mild steel round bar 12 mm dia and below |
| 45 | Vitrified floor tile 60x60 cm |
| 46 | Deharadun white lime |
| 47 | water proofing cement paint Please Enable Macros to View BoQ information |
