|
| 1 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbingdown with water etc. and removing debrish from site complete all as specified and directed. |
| 2 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets any thickness, including cover fillet complete all as specified and directed. |
| 3 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc.including removing of unserviciable material from site complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removing of rubish from site complete all as specified and directed. |
| 5 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 6 | Dismanting of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 7 | Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviciable existing tank complete all as specified and directed. |
| 8 | Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviciable existing tank complete all as specified and directed. |
| 9 | Supply and fix 20 mm bore steel tubesmedium grade, galvanised, with all fitting and fixedto walls, ceilings, roofs or laid in floors including taking down existing GI pipe complete all as specified and directed. |
| 10 | Supply and fix 15 mm bore steel tubesmedium grade, galvanised, with all fitting and fixedto walls, ceilings, roofs or laid in floors including taking down existing GI pipe complete all as specified and directed. |
| 11 | Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces and finish the surfaceseven and smooth without using extra cement as in wall complete all as specified and directed. |
| 12 | Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) andfinish the surfaceseven and smooth without using extra cement as in wall complete all as specified and directed. |
| 13 | Material and labour for 5mm thick rendering onconcrete surfaces in cement mortar (1:3) andfinish the surfaceseven and smooth without using extra cement as in ceiling complete all as specified anddirected. |
| 14 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and directed. |
| 15 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed. |
| 16 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 17 | Material and labour for PCC (1:2:4) type B-1 (20mm graded aggregate)as in coping, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessaryformwork complete all as specified and directed. |
| 18 | Supply and fix in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed. |
| 19 | Supply and fix in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed. |
| 20 | Supply and fix in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring jointsfixed to walls including stack clamp complete all as specified and directed. |
| 21 | Supply and fix in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed . |
| 22 | Supply and fix in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 23 | Supply and fix in repair 110mm bore PVC (SWR) bends of any radius and provided with access door complete all as specified and directed . |
| 24 | Supply and fix in repair 75 mm bore PVC (SWR) plain bend any radius complete all as specified and directed. |
| 25 | Supply and fix in repair 75 mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed. |
| 26 | Supply and fix in repair 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 27 | Supply and fix in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 28 | Disconnecting existing tanks of capacity exc 250 ltrs and n. exc 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified anddirected. |
| 29 | Disconnecting existing tanks of capacity exc 500 ltrs and n. exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified anddirected. |
| 30 | Material and labour for brick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6)complete all as specified and as directed. |
| 31 | All as per item No 30.00 above but except bricks and -ditto-.Note:- Serviciable bricks obtained from item No 3.00 shall be reused under this item including cleaning/ removing of cement mortar as directed by Engineer-in-Charge. |
| 32 | Materials and labour for half brick thick brick work with sub class `B` bricks, old size straight or curved on plan to any radius built in cement mortar(1:4) complete all as specified anddirected. |
| 33 | Supply and fix mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders, framed balusters, walk ways; railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 34 | Material and labour for structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes complete all as specified and directed. |
| 35 | Supply and fix pre-painted galvalume aluminum zinc coating GI based corrugated / semi- corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screwscomplete all as specified and directed. |
| 36 | Supply and fix pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 37 | Material and labour for repairs to uneven surface of concrete and reinforcement from drop of fins,facias, chajjas using necessary scaffolding and making good disturbed portion with rendering cement plaster, 10mm thick in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified and directed. |
| 38 | Supply and fix false ceiling with powder coated exposed GI grid suspension system (E-grid T-2430 or equivalent load carrying capacity- 12.50 Kg/sqm with mid span deflection n. exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long of size- 24x38mm x 0.25mm thick, cross tee of section size- 24x27mm x 0.25mm thick 1200mm/600mm long and wall angle of section size 22x22mm x 0.4mm thick. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The main runners to be placed @ 1200mm, The cross tee 1200mm will be inserted in pre-cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmx600mm. Additional cross tee of 600mm shall be placed perpendicular to the cross tee1200mm long to finally form a grid of 600mm x 600mm shall be supported by 6mm dia G.I. wire from perlins/soffits. 4mm thick high pressure steam cured non Asbestos fibre cement designer ceiling board (density> 1200kg/cum, modules of rupture (M.O.R)-15.85 Mpa, thermal conductivity (k)-0.0872 W/mk) of size 595mm x 595mm, confirming to IS 14862 & type B catagory III of ISO 8336-1993, (Reaction of fire-A2 -s1-d0) tested as per EN 13501 Part-I & BS-476 part-4, 5, 6 & 7, should be placed in the grid module to form a false ceiling complete all as specified and directed.Make: Armstrong/ Saint Gobain/ Lafarge/ Everest. |
| 39 | Cutting down vegetation growths like plants/ trees of girth n. exc 15cm from roof tops/ sides, external walls of bldgs, chajjas, wall juctions at junction of rain water/ CI waste water pipe junctions including removal of roots and taking out carefully possible quality of concrete in roofs embedded in walls/ slab surfaces making good affected locations and applyingapproved chemical (herbalmedcine) to arrest further growth and making good the distrubed surfaces with PCC (1:2:4) type B-1 or CM (1:2)complete all as specified and directed.Note :The unit rate quoted shall be deemed to include the cost of scaffoloding/ staging upto four storey height bldgs. |
| 40 | Supply and fix rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410 (Gde E-250 quality-A complete all as specified and directed. |
| 41 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girthand applying two coats ofsynthetic enamel paint over a coat of red oxide zinch chrome primer complete all as specified and directed. |
| 42 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed. |
| 43 | Material and labour for preparation of newly bitumen surfaces and applying two coats of bituminous aluminium paint @ 0.10 ltrs per sqm per coat complete all as specified and directed. |
| 44 | Complete removal of existing roof treatment in any layers and disposal of debris from site complete all as specified and directed.Notes: - (a) The rates are inclusive of removal for any type of old water proofing treatement over main RCC slab.(b) Bidders are advised to visit the site and esure about site condition before quoting their rates.(c) Demolition of PCC/ taking down plaster if any shall be measured and paid saparately under respective items. |
| 45 | Material and labour for PCC (1:2:4) type B0 (using 12.50 mm graded stone aggregate) mixed with water proofing compound @ 200 ml per bag of cement (50 Kg) or as per manufacturer instruction as in levelling course to match undulation of roof, in coving, roof kerbs including benching or mud stops, rounded or chamfered on edges etc including necessary form work and finished the rough surface complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. |
| 46 | Material and labourfor 5mm thick rendering in cement mortar (1:3) with using water proofing coumpound (WPC) @ 200 ml per bag of cement (50 Kg) or as per manufacturers instruction on roof top while concrete is green to become integrated part of concrete padding layer and finish the surfaceseven and smooth without using extra cement complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. |
| 47 | Supply only liquid water proofing compound (WPC) completeall as specified and directed. |
| 48 | Material and labour for water proofing treatment to RCC roof surface comprising with the following course of treatment/specifications from bottom to top :- (a) Applying cold bituminous primer @ 0.30 liters per sqm confirming to IS 3384 over plastered surfaces of roof.(b) One layer of APP based polymeric membrane3mm thick, weight not less than 3.50 kgs per sqm, reinforced with non woven polyester matt central core fabric (weight not less than 160 GSM) and coated on both side with and including layer of APP modified bitumen and finished with and including micro-prefabricated heat fusible polythene film on both surfaces. (c) Applying one coats of hot bitumen 85/25 grade @ 1.20 kg per sqm over membrane surface.(d) Finally applying two coats of bituminous aluminum paint @ 0.10 ltrs per sqm per coat on top surface.Note:-(i) The work shall be executed only through authorised applicator of manufacturer as approved by GE.(ii) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions. (iii) A minimum overlap of 150mm and 100mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instructions. Make of APP membrane:- Super Thermolay of M/s STP Ltd, Hyperplas of M/s IWL India Ltd, Hydrostop of M/s Tiki Tar Danosa (India) pvt ltd, , M/s FOSROC Chemicals, Smartcare APP membranes of M/s Asian Paints Ltd. |
| 49 | Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work in two layers, first layer of 10mm thick and top layer of 5mm thick with using water proofing coumpound (WPC) @ 200ml per 50 Kg bag of cement or as per manufacturers instructionand finish the surfaceseven and smooth without using extra cement as in wall complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. |
| 50 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint (camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and directed.Note:- The cost of scaffolding and necessary form work upto 9 meter height shall be deemed included in quoted rates. |
| 51 | Material and labour for complete removal of existing treatement on old decorated surfaces of walls and applying two coats of 100% premium acrylic emulsion paint (camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm including preparation of surface complete all as specified and directed.Note:- The cost of scaffolding and necessary form work upto 9 meter height shall be deemed included in quoted rates. |
| 52 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint (camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified anddirected.Note:- The cost of scaffolding and necessary form work upto 9 meter height shall be deemed included in quoted rates. |
| 53 | Material and labour for complete removal of existing treatment on walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer including applying 1mm thick wall care putty and including preparation of surface complete all as specified and directed. |
| 54 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of acrylic washable distemper complete all as specified and directed. |
| 55 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed. |
| 56 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified anddirected.Note:- The cost of scaffolding and necessary form work upto 9 meter height shall be deemed included in quoted rates. |
| 57 | Material and labour for complete removal of existing treatment on wall / roof projection / chajja / facia / corner etc by scrapping with mechanical sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc.sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etccomplete and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 sqm / ltr as per manufacturer\"s instructions and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed.Note :-(i) The work shall be executed only through authorised applicator of manufacturer as approved by GE.(ii) The quoted rate shall be deemed to include the cost of scaffoloding / staging upto 9 meter height. |
| 58 | Material and labour for writing letters or figures (Block, Roman, Italic or Indian) not exc. 30 cm high with synthetic enamel paint complete all as specified and directed. |
| 59 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamel paint complete all as specified and directed. |
| 60 | Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamel paint complete all as specified and directed. |
