|
| 1 | Supply, laying, jointing & testing of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed. |
| 2 | 3.5 core x 185 Sqmm |
| 3 | 3.5 core x 150 Sqmm |
| 4 | 3.5 core x 95 Sqmm |
| 5 | 3.5 core x 70 Sqmm |
| 6 | 3.5 core x 50 Sqmm |
| 7 | 3.5 core x 35 Sqmm |
| 8 | 4 core x 10 Sqmm |
| 9 | Supply, fabrication, installation and testing in replacemnt of LT Panel out door type factory made , water and vermin proof protection of suitable size made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 40 x 40 x 5 mm vertical frame and legs with mild steel flat iron 40 x 40 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) foundation of suitable size and connections of all outgoing / incommingcableinclusive of necessary excavation and earthwork as required including the following fitment accessories and alsoincluding removing old exisisting one complete all as specified and directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item. |
| 10 | INCOMMING |
| 11 | 4 Pole MCCB 315 Amps , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 36 KA breaking capacity including all fixing accessories with both ends spreader links-01 Nos |
| 12 | LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) |
| 13 | Digital voltmeter of range (0-500) volts, flush mounting type with selector switch – 01 No. |
| 14 | Copper strip busbar of 500 amps rated capacity wrapped with PVC sleeves and maintained colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends= 06 Nos |
| 15 | 4 pole ON LOADChangeover switch 415 volts in sheet metal encolsure of capacity 315 Amps including all fixing accessories with both ends spreader links - 01 No. |
| 16 | OUTGOING |
| 17 | 4 Pole MCCB 200 Amps, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links-02 Nos |
| 18 | 4 Pole MCCB 100 Amps, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links-02 Nos |
| 19 | MCB TPN 40 Amps C series, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 10 KA breaking capacity including all fixing accessories with both ends spreader links-02 Nos |
| 20 | LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -04 set (set of three)Make :- Legrand/L&T/Schneider (For each O/G) |
| 21 | Digital Ammeter of range (0-200) Amps, flush mounting type with CT’s of ratio 100-500/5 and selector switch – 04 set.(For each O/G) |
| 22 | Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No. |
| 23 | Supply ,fabrication, installation and testing in replacemnt of LT Panel out door type factory made , water and vermin proof protection of suitable size made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 40 x 40 x 5 mm vertical frame and legs with mild steel flat iron 40 x 40 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) foundation of suitable size and connections of all outgoing / incommingcableinclusive of necessary excavation and earthwork as required including the following fitment accessories and alsoincluding removing old exisisting one complete all as specified and as directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item. |
| 24 | INCOMMING |
| 25 | 4 Pole MCCB 315 Amps , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 36 KA breaking capacity including all fixing accessories with both ends spreader links-01 Nos |
| 26 | LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) |
| 27 | Digital voltmeter of range (0-500) volts, flush mounting type with selector switch – 01 No. |
| 28 | Copper strip busbar of 500 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends= 06 Nos |
| 29 | OUTGOING |
| 30 | 4 Pole MCCB 160 Amps , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links-02 Nos |
| 31 | 4 Pole MCCB 100 Amps, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links-02 Nos |
| 32 | MCB TPN 40 Amps C series , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 10 KA breaking capacity including all fixing accessories with both ends spreader links-02 Nos |
| 33 | LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -04 set (set of three)Make :- Legrand/L&T/Schneider.(For each O/G) |
| 34 | Digital Ammeter of range (0-200) Amps, flush mounting type with CT’s of ratio 100-500/5 and selector switch – 04 set.(For each O/G) |
| 35 | Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No. |
| 36 | Supply, Installation, testing and Commissioning factoryfabricated, out door type, LT FEEDER PILLAR BOX Double Door, Both side openable made out of 3.15 mm thick CRCA Sheet of size 0.7MX0.6mX0.35M with projected Globe roof for rain water protection duly treatedthrough 8 tank pre treatment process andpaintedwith epoxy powder coated mat finish ofSIEMENS GREY structural RAL 7032 shade colour Dust and Vermin Proof,Double door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embededwith 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level complete withinternal connection with suitable size of cable ,cable lugs,and cable glandsPCC Foundation in Cement Concrete 1:3:6 type C1 (using 20mm Graded Stone Aggregate) and Testing after Installation complete all as specified and comprising of the following :– |
| 37 | Aluminium bas bar 500amps - 04 Nos, supported with suitable size of heavy duty porcelain stand lock with suitable sizeof brass nut, bolts and washer with heat shrinkable PVC sleeving.The bar shall be colour coaded (red, yellow and blue) for three phases and black for neutral. |
| 38 | MCCB 315amps, 415 volt, 36 KA Breaking capacity4 pole Electromagnetic releaseduly connected to Bus Bar AsINCOMING- 01 Nos |
| 39 | Supply, Installation, testing and Commissioning factoryfabricated, out door type, LT FEEDER PILLAR BOX Double Door, Both side openable made out of 3.15 mm thick CRCA Sheet of size 0.70 MX0.6 M X 0.35M with projected Globe roof for rain water protection duly treatedthrough 8 tank pre treatment process andpaintedwith epoxy powder coated mat finish ofSIEMENS GREY structural RAL 7032 shade colour Dust and Vermin Proof ,Double door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System ,including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embededwith 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level complete withinternal connection with suitable size of cable,cable lugs,and cable glandsPCC Foundation in Cement Concrete 1:3:6 type C1 (using 20mm Graded Stone Aggregate) and Testing after Installation complete all as specified and comprising of the following :– |
| 40 | Aluminium bas bar 400 Amps - 04 Nos, supported with suitable size of heavy duty porcelain stand lock with suitable sizeof brass nut, bolts and washer with heat shrinkable PVC sleeving.The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. |
| 41 | MCCB 200Amps, 415 volt, 36 KA Breaking capacity4 pole Electromagnetic releaseduly connected to Bus Bar AsINCOMING- 01 Nos |
| 42 | Excavation in trenches, in soft/loose soilnot exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out complete all as specified and directed. |
| 43 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 44 | Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed. |
| 45 | M & L in repair for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable complete all as specified and directed. Note: Punned down thickness shall be measured for payments purposes. |
| 46 | M & L in repair for old size sub class ‘B’ bricks, laid in trenches as cable covers laid across the cable complete all as specified and directed. |
| 47 | Supply and fixingof GI tubing, light grade, 80 mm bore with all fitting lais in trenches / pole / wall for protection of cables complete all as specified and directed. |
| 48 | Supply and laying in replacement GI tubing light grade of size 40 mm for cable protection on road/drain/floor/pole including necessary clamps 40x4mm complete all as specified and directed. |
| 49 | M & L for horizontal boring mechanically across the existing road without disturbing the road surface for inserting 80/40 mm bore GI pipe complete all as specified and directed. ( Note :- GI pipe will be measured and paid sepatately under respective item of sch\"A\"). |
| 50 | S & F hot press moulded SMC junction / terminal box of size with internal diamensions of 200 x 140 x 95 mm with hinged door, incl provision of 4 way connector415 Volts made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable size of cable lugs/glands, fixied on pole by means of clamps made out of MS flat iron of size 25 mm x 3 mm including dismantling of old unserviceable all as specified and as directed.Make: Hensel/Syntex/C&S |
| 51 | Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 52 | Dismantling of aluminium conductor steel reinforced (ACSR) of any size etc complete all as specified. |
| 53 | Dismantling of unserviceable GI wire of any size complete all specified and directed. |
| 54 | Dismentling of LT insulators of any type, size and make complete all specified and directed. |
| 55 | M&L for Advance Maintenance Free G.I. SAFE EARTHINGElectrodewith PIPEof not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meterlength, The electrode should be ofgalvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compoundto provide maximum contact between the electrode and Back Fill Compound.GI Electrode Shall be tested from CPRI.The earting pit should be cover with pcc(1:2:4 , B1) cover ,of450 x 450 mm complete all as specified and directed.Note for Item : After completion earth resistance shall be recorded with earth megger and the record should be submitted to to department duly signed by contractor and Engineer in charge. |
| 56 | Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor without remote with and including electronic fan regulator etc and connecting up complete including complete connection from ceiling rose to fan and writing of MES Number with synthetic enamel paint complete all as specified and directed. |
