|
| 1 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 2 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 3 | a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 4 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 5 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 6 | a) 250x16 mm |
| 7 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 8 | a) 200x10 mm |
| 9 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 10 | a) 100 mm |
| 11 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 12 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 13 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 14 | (i)Single socketed pipes. |
| 15 | a) 110 mm diameter |
| 16 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 17 | a) Single tee with door |
| 18 | (i) 110x110x110 mm |
| 19 | b) Bend 87.5° |
| 20 | (i) 110 mm bend |
| 21 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 22 | a) 110 mm |
| 23 | Pointing on tile brick work with cement mortar 1:3 (1 cement: 3 fine sand) : |
| 24 | a) Flush / Ruled/ Struck or weathered pointing. |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 26 | a) Two or more coats on new work. |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 28 | a) One or more coats on old work. |
| 29 | French spirit polishing : |
| 30 | a) One or more coats on old work. |
| 31 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 32 | a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 33 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. |
| 34 | a) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 35 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 36 | a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 37 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 38 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 39 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 40 | a) Orissa pattern W.C Pan of size 580x440 mm |
| 41 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 42 | a) For thickness of tiles 10 mm to 25 mm |
| 43 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 44 | a) 10 litre capacity - White |
| 45 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 46 | a) 15 mm nominal bore, 122 mm long. Weighing not less than 99 gms. |
| 47 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 48 | a) 20mm nominal bore, 89 mm long. Weighing not less than 88 gms. |
| 49 | Cartage of welding machine from shop to site and sending back from site to shop including hire charges all complete as per directions of the Engr. In charge. |
| 50 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 51 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 52 | Providing unskilled labour for day to day miscellaneous civil works all complete as per directions of E-in-C. |
| 53 | Providing and applying white cement based wall care putty all complete as per direction of Engineer-in-charge |
| 54 | Uprooting and cutting plants grown on the walls of buildings i/c dismentling brick work wherever required and making the same good complete as per directios of the Engineer in Charge. |
| 55 | Repairing of Aluminium door/ window frame and shutter with required cleat screws after taking out the shutter i/c cost of labour etc. all complete as per direction of E-in-C. |
| 56 | Providing and fixing scaffolding using wooden ballies and ropes for works such as uprooting of trees on backside of staff qtrs and office buildings and for fixing of glass all complete as per directions of E-in-C |
| 57 | Dismantling existing false flooring including Channel.Jcak and floor tiles associated with jack and channel etc all complete including disposal of unserviceable material and stacking of serviceable material with in lead as directed by Engineer-in-charge. |
| 58 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 59 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\" BSP thread and shapes, weighing not less than 60 gms. |
| 60 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 61 | a) 20 mm nominal outer dia. Pipes. |
| 62 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 63 | a) 25 mm nominal bore |
