|
| 1 | PART-A |
| 2 | Carriage of following line materials for 11 Kv Line from store centre to Pit Site including measuring weiging loading unloading at both ends and proper stacking at safe site. |
| 3 | ST POLE 13 M- IS 410 SP- 72 |
| 4 | STEEL TUBLER POLE SP-55 11.00 MTR |
| 5 | PCC POLE 8.5 MTR.LONG |
| 6 | G.I.WIRE 6 SWG |
| 7 | 11 KV POLYMER DISC INSULATOR (T&C) 45 KN |
| 8 | A.C.S.R. WEASEL CONDUCTOR |
| 9 | H/S CABLE J/KIT 3x70 MM 11KV O/D XLPE |
| 10 | M.S. DROPPER CHANNEL 100X50X5X2028 MM |
| 11 | Stay Set Galvanised 16x1800 as pr ann-1 |
| 12 | CABLE H.T.XLPE 11 KV 3X70 SQ.MM |
| 13 | 100 KVA 11/0.4KV TRANSFORMER NEW |
| 14 | MS T-OFF CHANNEL 100X50X5X1300 MM |
| 15 | 3 Phase DO Fuse Set |
| 16 | 11 KV TPMO WITH POLYMER INSULATOR |
| 17 | 11 KV Stay Clamp for PCC Pole 8.5 M long |
| 18 | CROSS ARM HOLDING CLAMP FOR STP |
| 19 | M.S. Top Channel I00x50x5x2240 mm |
| 20 | T/F BASE ANGLE 65X65X6X2028 MM |
| 21 | STAY WIRE 7/10 SWG |
| 22 | DISC FITTING 45KN |
| 23 | HDPE PIPE 6 DIA |
| 24 | EARTH ROD 2540X20 MM |
| 25 | 11 KV COMPOSITE POLYMER PININSULATOR |
| 26 | GAURDING ANGLE CLAMP |
| 27 | CROSS ARMS V-TYPE 11 KV |
| 28 | 11 KV F Clamp for PCC Pole 8.5 Mtr Long |
| 29 | GI WIRE 6&10 SWG - GUARD LACINGSTREET |
| 30 | 11 KV Cross Arm Clamp for PCC Pole 8.5 M |
| 31 | 11 KV DP Clamp for PCC Pole 8.5 Mtr |
| 32 | Guarding Angle 50x50x6x1600 MM |
| 33 | PART-B |
| 34 | Supply of the following 11Kv New Line & Strenthening Items by Contractor as per RESSPO drawing & dimension:- |
| 35 | DANGER BOARD WITH CLAMP FOR 11 KVLINE |
| 36 | GI Pipe 6 inch dia for XLPE Cable |
| 37 | BARBED WIRE |
| 38 | 11 KV STAY LOOP INSULATOR |
| 39 | NUMBER PLATE |
| 40 | STONE PAD |
| 41 | Nut-Bolts for Clamps & Channels |
| 42 | PART-C |
| 43 | Erection of the following supports after making of pits as per RESSPO norms & filling of pits by concrete of ratio 1:4:8 (cement brick balast & sand). Fitting of all accessories as cross arm, top channel, bracing angle, pin insulator, disc insulator, danger board, number plate, barbed wire & clamps etc. Plinthing of support above 300mm ground level by concrete of ratio 1:4:8 (cement brick balast & sand) will be done at the time of erection of pole. Painting of ST Pole structure as per RESSPO norms also (all type of paints, red oxide primer, nut, bolts & grouting material etc. will be provided by contractor). |
| 44 | ST POLE 13 M- IS 410 SP- 72 |
| 45 | STEEL TUBLER POLE SP-55 11.00 MTR |
| 46 | PCC POLE 8.5 MTR.LONG |
| 47 | G.I.WIRE 6 SWG |
| 48 | 11 KV POLYMER DISC INSULATOR (T&C) 45 KN |
| 49 | A.C.S.R. WEASEL CONDUCTOR |
| 50 | H/S CABLE J/KIT 3x70 MM 11KV O/D XLPE |
| 51 | M.S. DROPPER CHANNEL 100X50X5X2028 MM |
| 52 | Stay Set Galvanised 16x1800 as pr ann-1 |
| 53 | CABLE H.T.XLPE 11 KV 3X70 SQ.MM |
| 54 | 100 KVA 11/0.4KV TRANSFORMER NEW |
| 55 | MS T-OFF CHANNEL 100X50X5X1300 MM |
| 56 | 3 Phase DO Fuse Set |
| 57 | 11 KV TPMO WITH POLYMER INSULATOR |
| 58 | 11 KV Stay Clamp for PCC Pole 8.5 M long |
| 59 | CROSS ARM HOLDING CLAMP FOR STP |
| 60 | M.S. Top Channel I00x50x5x2240 mm |
| 61 | T/F BASE ANGLE 65X65X6X2028 MM |
| 62 | STAY WIRE 7/10 SWG |
| 63 | DISC FITTING 45KN |
| 64 | EARTH ROD 2540X20 MM |
| 65 | 11 KV COMPOSITE POLYMER PININSULATOR |
| 66 | GAURDING ANGLE CLAMP |
| 67 | CROSS ARMS V-TYPE 11 KV |
| 68 | 11 KV F Clamp for PCC Pole 8.5 Mtr Long |
| 69 | GI WIRE 6&10 SWG - GUARD LACINGSTREET |
| 70 | 11 KV Cross Arm Clamp for PCC Pole 8.5 M |
| 71 | 11 KV DP Clamp for PCC Pole 8.5 Mtr |
| 72 | Guarding Angle 50x50x6x1600 MM |
| 73 | DANGER BOARD WITH CLAMP FOR 11 KVLINE |
| 74 | BARBED WIRE |
| 75 | 11 KV STAY LOOP INSULATOR |
| 76 | NUMBER PLATE |
| 77 | STONE PAD |
| 78 | Nut-Bolts for Clamps & Channels |
| 79 | Grouting of PCC/ST Pole as per resspo norms |
| 80 | Concreting of Stay as per resspo norms |
| 81 | Cable Laying Along with Sand & Brick Etc. as per estimate |
| 82 | Drilling & Establishment of HDPE Pipe as per estimate |
| 83 | Establishment of GI Pipe 6 inch dia for XLPE Cable as per estimate Please Enable Macros to View BoQ information |
