|
| 1 | Cartage ofLime, moorum, cum building rubbish by Manual Labour / Mechanical Transportincluding loading, unloading+B12:B99 and stacking for lead less than 0.50 KM. |
| 2 | Earth work in all kind of soil excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 3 | Providing and laying in position cement concrete of 1:2:4 specified grade excluding the cost of centering and shuttering. |
| 4 | Providing and laying in position cement concrete of 1:5:10 specified grade excluding the cost of centering and shuttering. |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 8 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete40 mm thick with 20 mm nominal size stone aggregate. |
| 9 | 12 mm cement plaster of mix 1:6 (1 cement: 6 fien sand) |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, Two or more coats on new work. |
| 11 | Lettering with black Japan paint of approved brand and manufacture. |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. |
| 13 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 14 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 15 | do- but Above 40 mm nominal bore |
| 16 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:Up to 150 mm diameter. |
| 17 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres :Up to 150 mm diameter |
| 18 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 19 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin-charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 20 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes PN-16 pipe, 40 mm OD (SDR-7.4) dia confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work |
| 21 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes PN-10 pipe, 50 mm OD (SDR-11) dia confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work |
| 22 | P/F 3 layer PP-R (Poly propylene Random Copolymer) pipes confirming to IS: 15801 UV stabilized & antimicrobial Fusion welded, having thermal stability for hot Nd cold water supply, iNcluding all PP-R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per directionof Engineer -In charge (PN-10 pipe 110mm OD (SDR-11) |
| 23 | P/F 3 layer PP-R (Poly propylene Random Copolymer) pipes confirming to IS: 15801 UV stabilized & antimicrobial Fusion welded, having thermal stability for hot Nd cold water supply, iNcluding all PP-R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per directionof Engineer -In charge (PN-10 pipe 160mm OD (SDR-11) |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) for size 20 mm nominal dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing as required. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 25 | do-but 25 mm nominal dia Pipes |
| 26 | do- but 32 mm nominal dia Pipes |
| 27 | do- but 40 mm nominal dia Pipes |
| 28 | do- but 50 mm nominal dia Pipes |
| 29 | do- but 65 mm nominal dia Pipes |
| 30 | P/F G.I. Pipe 15 mm dia \"B\" class ISImark completed with G.I. fittings and clamp i/c cutting and makin good the wall etc. |
| 31 | P/F G.I. Pipe 20 mm dia \"B\" class ISImark completed with G.I. fittings and clamp i/c cutting and makin good the wall etc. |
| 32 | P/F G.I. Pipe 25 mm dia \"B\" class ISImark completed with G.I. fittings and clamp i/c cutting and makin good the wall etc. |
| 33 | P/F G.I. Pipe 32 mm dia \"B\" class ISImark completed with G.I. fittings and clamp i/c cutting and makin good the wall etc. |
| 34 | P/F G.I. Pipe 40 mm dia \"B\" class ISImark completed with G.I. fittings and clamp i/c cutting and makin good the wall etc. |
| 35 | P/F G.I. Pipe 50 mm dia \"B\" class ISImark completed with G.I. fittings and clamp i/c cutting and makin good the wall etc. |
| 36 | Providing, laying, testing & commissioning of \"C\" class heavy duty 100 mm dia MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 37 | do- but 150 mm dia M.S. Pipes. |
| 38 | do- but 250 mm dia M.S. Pipes. |
| 39 | Providing and fixing 160 mm nominaldia Unplasticized Polyvinyl Chloride (UPVC) pipes, with 10 KGF/sqcm, having thermal stability for cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 40 | Do -- but 100-110 mm dia UPVC pipe complete in all respect. |
| 41 | Do -- but 75-80 mm dia UPVC pipe complete in all respect. |
| 42 | Do -- but 63-65 mm dia UPVC pipe complete in all respect. |
| 43 | Do -- but 50 mm dia UPVC pipe complete in all respect. |
| 44 | Making connection of G.I./ MS/ CPVC/CI/UPVC etc distribution branch with G.I. main of 25 to 40 mm nominal bore sizes by providing and fixing tee, including cutting and threading the pipe etc. complete |
| 45 | Making connection of G.I. MS/ CPVC/CI/UPVC distribution branch with G.I. main of 50 to 80 mm nominal bore sizes by providing and fixing tee, including cutting and threading the pipe etc. complete |
| 46 | Fixing water meter and stop cock or making connection 15 mm to 20 mm size in G.I. MS/ CPVC/CI/UPVCpipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). |
| 47 | Providing and fixing gun-metal gate valve 20mm dia with C.I.wheel of approved quality (screwed end). |
| 48 | Providing and fixing gun-metal gate valve 25mm dia with C.I.wheel of approved quality (screwed end). |
| 49 | Providing and fixing gun-metal gate valve 32 mm dia with C.I.wheel of approved quality (screwed end). |
| 50 | Providing and fixing gun-metal gate valve 40mm dia with C.I. wheel of approved quality (screwed end). |
| 51 | Providing and fixing gun-metal gate valve 50mm dia with C.I. wheel of approved quality (screwed end). |
| 52 | Providing and fixing ball valve (brass) for size 15 mm nominal bore of approved quality, High or low pressure, with plastic floats complete : |
| 53 | do-but 20 mm nominal bore |
| 54 | do-but 25 mm nominal bore |
| 55 | Supply and fixing of forged Brass Ball valve 32 mm dia good Quality,make: equivalent to zoloto. |
| 56 | Supply and fixing of forged Brass Ball valve 40 mm dia good Quality,make: equivalent to zoloto. |
| 57 | Supply and fixing of forged Brass Ball valve 50 mm dia good Quality,make: equivalent to zoloto. |
| 58 | Supply and fixing of forged Brass Ball valve 65 mm dia good Quality,make: equivalent to zoloto. |
| 59 | Supply and fixing of forged Brass Ball valve 80 mm dia good Quality,make: equivalent to zoloto. |
| 60 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32mm nominal bore Horizontal type. |
| 61 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32mm nominal bore Vertical type. |
| 62 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40mm nominal bore Horizontal type. |
| 63 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40mm nominal bore Vertical type. |
| 64 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50mm nominal bore Horizontal type. |
| 65 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50mm nominal bore Vertical type. |
| 66 | Providing and fixing G.I. Union in existing G.I. pipe for the size 15 mm nominal bore, line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 67 | do-but 20 mm nominal bore |
| 68 | do-but25 mm nominal bore |
| 69 | do-but32 mm nominal bore |
| 70 | do-but40 mm nominal bore |
| 71 | SITC of 15 mm Forget brass Y-type strainer, PN-25 (Screwed). |
| 72 | SITC of 20 mm Forget brass Y-type strainer, PN-25 (Screwed). |
| 73 | SITC of 25 mm Forget brass Y-type strainer, PN-25 (Screwed). |
| 74 | SITC of 32 mm Forget brass Y-type strainer, PN-25 (Screwed). |
| 75 | SITC of 40 mm Forget brass Y-type strainer, PN-25 (Screwed). |
| 76 | SITC of 50 mm Forget brass Y-type strainer, PN-25 (Screwed). |
| 77 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 78 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.15 mm nominal bore, 105 mm long, weighing not less than 138 gms. |
| 79 | do but 20 mm nominal bore, 120 mm long, weighing not less than 198 gms. |
| 80 | do but 25 mm nominal bore, 152mm long, weighing not less than 440 gms. |
| 81 | do but 40 mm nominal bore, 206mm long, weighing not less than 690 gms. |
| 82 | do but 50 mm nominal bore, 242mm long, weighing not less than 1240 gms. |
| 83 | Providing and fixing uplasticised PVC connection pipe for the size 15 mm nominal bore 45 cm length with brass unions : |
| 84 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing Supply/drain pipe etc. and repairing the hole after insertion of pipe work etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 85 | Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc.upto 300 mm dia, suitable for flanged jointing as per IS : 1538 : |
| 86 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gunmetal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of 100 mm dia sizes as required : |
| 87 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gunmetal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of 150 mm dia sizes as required : |
| 88 | Providing, installation, testing and commissioning of non-return valve of 100 mm Dia sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 89 | Providing, installation, testing and commissioning of non-return valve of 150 mm Dia sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 90 | Supply and fixing of C.I.body wafer type Buterfly valve 50 mm with S.S. disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation. |
| 91 | Supply and fixing of C.I.body wafer type Buterfly valve 65 mm with S.S. disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation. |
| 92 | Supply and fixing of C.I.body wafer type Buterfly valve 80 mm with S.S. disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation. |
| 93 | Supply and fixing of C.I.body wafer type Buterfly valve 100 mm with S.S. disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation |
| 94 | Supply and fixing of C.I.body wafer type Buterfly valve 150 mm with S.S. disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation. |
| 95 | Providing and fixing CPVC ball valve of approved quality, high or low preassure, with plastic floats complete 20 mm nominal bor complete in all respect. |
| 96 | Providing and fixing CPVC ball valve of approved quality, high or low preassure, with plastic floats complete 25 mm nominal bor complete in all respect. |
| 97 | Providing and fixing CPVC ball valve of approved quality, high or low preassure, with plastic floats complete 32 mm nominal bor complete in all respect. |
| 98 | Providing and fixing CPVC ball valve of approved quality, high or low preassure, with plastic floats complete 40 mm nominal bor complete in all respect. |
| 99 | Providing and fixing CPVC ball valve of approved quality, high or low preassure, with plastic floats complete 50 mm nominal bor complete in all respect. |
| 100 | Providing and fixing CPVC ball valve of approved quality, high or low preassure, with plastic floats complete 65 mm nominal bor complete in all respect. |
| 101 | Providing and fixing CPVC ball valve of approved quality, high or low preassure, with plastic floats complete 80 mm nominal bor complete in all respect. |
| 102 | cutting & making water connection form exitsting main 100 mm dia to 160 m dia & reconnected to it as the same I/C required fittings labour, T& P etc. As for proper completion of the work. |
| 103 | cutting & making water connection form exitsting main 200 mm dia to 300m dia & reconnected to it as the same I/C required fittings labour, T& P etc. As for proper completion of the work. |
| 104 | Horizontal Boring in Road crossing/ floor etc upto 200 mm diameter for laying Cable/ Pipe etc, in all soils except ordinary hard rocks requiring blasting, including making the required tranch on road side and refilling the same as it is, if required after the road crossing and complete with laying of pipe/cable ( excluding cost of pipe or cable) as required. |
| 105 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 106 | Providing & fixing flow switch in 100 mm dia sizes M.S. pipe including connection etc as required. |
| 107 | Providing & fixing flow switch in 150 mm dia sizes M.S. pipe including connection etc as required. |
| 108 | S/F of M.S. clamp ( round shape) made with 65 x 6 mm strip with 25 mm dia M.S. socket heavy duty welded for water connection from M.S./ G.I./ C.I./ CPVC/ UPVC/ PPR Pipe of 80 to 110 mm dia pipe including of required Nut bolt, rubber insertion, packing etc.complete with fixing and connection etc as required. |
| 109 | S/F of M.S. clamp ( round shape) made with 65 x 6 mm strip with 25 mm dia M.S. socket heavy duty welded for water connection from M.S./ G.I./ C.I./ CPVC/ UPVC/ PPR Pipe of 150 to 250 mm dia pipe including of required Nut bolt, rubber insertion, packing etc.complete with fixing and connection etc as required. |
| 110 | Supplying and fixing single headed internal hydrant valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Stainless Steel cap and chain as required. |
| 111 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304) |
| 112 | Providing and fixing CPVC Union of approved quality, high or low preassure with 20 mm nominal bor complete in all respect. |
| 113 | Providing and fixing CPVC Union of approved quality, high or low preassure with 25 mm nominal bor complete in all respect. |
| 114 | Providing and fixing CPVC Union of approved quality, high or low preassure with 32 mm nominal bor complete in all respect. |
| 115 | Providing and fixing CPVC Union of approved quality, high or low preassure with 40 mm nominal bor complete in all respect. |
| 116 | Providing and fixing CPVC Union of approved quality, high or low preassure with 50 mm nominal bor complete in all respect. |
| 117 | SITC of Submersible pump set of 4 to 6 stage,100- 150 mm boring,1800 LPM cold and clear water against a total head of approximatly 53 mtr with motor of 30 HP suitable to operete on 415±10% Volts, 3 phase, 50 Hz AC supply complete. Make: equivalent to Kirlosker. |
| 118 | SITC ofopen well Submersible pump set , cold and clear water against a total head of approximatly 24 mtr with discharge of 600 LPM motor of 7.5 HP suitable to operete on 415±10% Volts, 3 phase, 50 Hz AC supply complete. Make: equivalent to KoS844, Kirlosker. |
| 119 | SITC ofopen well Submersible pump set , cold and clear water against a total head of approximatly 30 mtr head and 420 LPM with motor of 10 HP suitable to operete on 415±10% Volts, 3 phase, 50 Hz AC supply complete. Make: equivalent to KoS1050+, Kirlosker. |
| 120 | SITC ofopen well/ vertical/ Submersible pump set , cold and clear water against a total head of approximatly 5 mtr with motor of 20 HP suitable to operete on 415±10% Volts, 3 phase, 50 Hz AC supply complete. Make: equivalent to Jos2040+, Kirlosker. |
| 121 | SITC of Verticle multi stage pumpset, number of stage 4-8, 40- 50 mm boring,with motor of 5 HP, approximate 40 mtr head, 300 LPM suitable to operete on 415±10% Volts, 3 phase as required, 50 Hz AC supply complete. Make: equivalent to KVM-10078,Kirlosker. |
| 122 | SITC of Verticle multi stage pumpset, number of stage 4-8, 25-50 mm boring, with motor of 3 HP ap[proximatly 25 mtr head, 100 LPM suitable to operete on 230±10/415±10% Volts, 1/3 phase, 50 Hz AC supply complete. Make: equivalent to KVM-2170,Kirlosker. |
| 123 | SITC of Verticle multi stage pumpset, number of stage 4-8, 25-40 mm boring, with motor of 2 HP, with 18 mtr head, 100 LPM suitable to operete on 230±10/415±10% Volts, 1/3 phase, 50 Hz AC supply complete. Make: equivalent to KVM-2100,Kirlosker. |
| 124 | SITC of Verticle multi stage pumpset, number of stage 2, 80- 80 mm boring,with motor of 7.5 HP approximate head 22 mtr, 200 LPM suitable to operete on 415±10% Volts, 3 phase as required, 50 Hz AC supply complete. Make: equivalent to KCIL45-2-2/5.5kw/kmoc,Kirlosker. |
| 125 | SITC of 3 phase submersible pump controller,415 V, 50 Hz, 20 HP FASD (with wideband coil)including SPPR, Water lavel controller Starter.Make: Equivaled to MU-G20W FASD heavy duty Stater, HSN Code8536 L&T Agri. Includng connection wire etc as required Complete in all respect. |
| 126 | SITC of 3 phase submersible pump controller,415 V, 50 Hz, 10 HP FASD (with wideband coil)including SPPR, Water lavel controller Starter.Make: Equivaled to MU-G10W DOL heavy duty Stater, HSN Code8536 L&T Agri. Includng connection wire etc as required Complete in all respect. |
| 127 | SITC of 3 phase submersible pump controller,415 V, 50 Hz, 30 HP FASD (with wideband coil)including SPPR, Water lavel controller Starter.Make: Equivaled to MU-G30W FASD heavy duty Stater, Includng connection wire etc as required Complete in all respect. |
| 128 | SITC of 6205 ball bearing deep groove ball bearing, Make: equivalent to SKF-6205-ZZ. |
| 129 | SITC of 6206 / 6306 ball bearing deep groove ball bearing, Make: equivalent to SKF-6206-ZZ/ 6306-ZZ. |
| 130 | SITC of 6307 ball bearing deep groove ball bearing, Make: equivalent to SKF-6307-ZZ. |
| 131 | SITC of Mechanical sealfor 3 HP/ 5 HP/7.5 HP pressure pump motor. Make: Equivaent to Kirloskar. |
| 132 | SITC of Mechanical sealfor1 HP/ 2 HP pressure pump motor. Make: Equivaent to Kirloskar. |
| 133 | SITC of rewinding for 7.5 HP pressure pump motor, submersible pump, openwell pump, Multi stage verticle pump etc. Make: Equivaent to Kirloskar. |
| 134 | SITC of rewinding for 5 HP pressure pump motor, submersible pump, openwell pump, Multi stage verticle pump etc. Make: Equivaent to Kirloskar |
| 135 | SITC of rewinding for 3 HP pressure pump motor, submersible pump, openwell pump, Multi stage verticle pump etc. Make: Equivaent to Kirloskar |
| 136 | SITC of rewinding for 2 HP pressure pump motor, submersible pump, openwell pump, Multi stage verticle pump etc. Make: Equivaent to Kirloskar |
| 137 | SITC of rewinding for 1 HP pressure pump motor, submersible pump, openwell pump, Multi stage verticle pump etc. Make: Equivaent to Kirloskar |
| 138 | Reparing work of30 -45 HP submersible pump Set. |
| 139 | S/F of thrust bearing pad plate set for 45 HP submercible pump set. |
| 140 | Reparing of rotor with grainding work for 45 HP submerciable pump set. |
| 141 | S/F Submersible motor bush for 5-15 HP. |
| 142 | S/F Submersible motor bush for 25-45 HP. |
| 143 | Rewinding of Submersible, multi stage verticle,openwell submersible motor pump set 10 HP with new insulating copper wire including labour with T&P etc complete with oilseal, sand guard, including labour work related to miner granding balancing etc. complete in all respect. |
| 144 | Rewinding of Submersible, multi stage verticle, openwell submersible motor pump set 45 HP with new insulating copper wire including labour with T&P etc complete with oilseal, sand guard, including labour work related to minor granding balancing etc. complete in all respect. |
