Tender For Designing, Fabricating, Testing, Installing And Fixing In Position Curtain Wall With Aluminum Composite Panel Cladding With Aluminum Base Frames In Machine Bay At Dam Toe Power House Of Kgps At Gurez, Bandipora, J And K (Pkg-571)., Gurez-Jammu And Kashmir
TDR : 53891055
Tender Notice
BOQ
17 Days Left
Gurez
Jammu And Kashmir
Tender For Designing, Fabricating, Testing, Installing And Fixing In Position Curtain Wall With Aluminum Composite Panel Cladding With Aluminum Base Frames In Machine Bay At Dam Toe Power House Of Kgps At Gurez, Bandipora, J And K (Pkg-571).
Name of work: Designing, Fabricating, Testing, Installing and Fixing in Position Curtain Wall with Aluminum Composite Panel Cladding with Aluminum Base Frames in Machine Bay at Dam Toe Power House of KGPS at Gurez, Bandipora, J&K (PKG-571).
Sl. No.
Item Description
1
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:a) Structural analysis & design and reparation of shop drawings for pressure equalization or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 andpolymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts,washers, cleats, weather silicone sealant, backer rods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanizedwith serrations and serrated washers to arrest the wind load movement, fasteners, SS 316Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi metallic contacts all complete required to perform as per specification and drawing Theitem includes cost of all material &labour component, the cost of all mock ups at site, costof all samples of the individual components for testing in an approved laboratory, fieldtests on the assembled working curtain wall with aluminium composite panel cladding,cleaning and protection of the curtain wall with aluminium composite panel cladding tillthe handing over of the building for occupation. Base frame work for ACP cladding ispayable under the relevant aluminium items The Contractor shall provide curtain wallwith aluminium composite panel cladding, having all the performance characteristics allcomplete , as per the Architectural drawings, as per item description, as specified, as perthe approved shop drawings and as directed by the Engineer-in-Charge. However, for thepurpose of payment, only the actual area on the external face of the curtain wall withAluminum Composite Panel Cladding (including width of groove) shall be measured insqm. up to two decimal places.
2
Providing and fixing aluminum work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides withrequired EPDM rubber / neoprene gasket felt etc. Aluminum sectionsshall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminum snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. For fixed portion Anodized aluminum (Anodized transparent or dyed to requiredshade according to IS:1868, minimum anodic coating of grade AC 15)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
