Providing & fixing 12 mm thick tegular edge Glass Fibre Reinforced Gypsum False ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the1200x600mm panel to formSqm 1365.00 grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid
3
wooden ward robe
4
Table (pain wood frame,9mm plywood, in side off white laminat ) Top wooden laminet
5
Providing and Fixing Cushion Vinyl/Fully flexible Vinyl Flooring confirming to I.S.-3462 Flooring of approved make with fibre base using rubber base adhesives including rolling with light wooden roller complete :
6
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete:20mm
7
Providing and fixing curtain with using good quality fabric
8
Providing & Fixing of IP20, 2\"x2\" LED Surface/ Recessed mounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.
9
s/f cub light
10
लाईट पॉइन्ट/फेन पॉईन्ट/ एक्जास्ट फेन पॉइन्ट/ काल बेल पॉईन्ट के लिए 1.5 वर्ग मि.मी. एफआर पीवीसी इन्सुलेटेड कॉपर कन्डक्टर सिंगल कोर केबिल से, मॉडयूलर स्विच, मॉडयूलर प्लेट, उपयुक्त जीआई बॉक्स एवं 1.5 वर्ग मि.मी. एफआर पीवीसी इन्सुलेटेड कॉपर कन्डक्टर सिंगल कोर केबिल से अर्थिग सहित आवश्यकतानुसार सतह/खाली स्थान में मध्यम दर्जे की पीवीसी कन्डूट वाईरिंग करना
11
fix chair with arm rest and cushion sheet back Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
