|
| 1 | Schedule-A(B/R) |
| 2 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed |
| 3 | M&L for Cement concrete 1:4:8 Type D2 (40mm graded aggeregate) in foundations, filling and mass concrete complete all as specified and as directed |
| 4 | M&L reinforcement cement concrete (nominal mix) Type B11:2:4 (20mm graded aggregate) coping, Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge |
| 5 | Formwork to edges of concreteflats, openings in concrete walls and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. |
| 6 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 |
| 7 | M&L for rendering 15 mm thick of brick work or concrete surfaces in CM 1:4 (Water proofing compund paid separtately) finished even and fair surfaces without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 8 | Supply only liquid water proofing compound mix cement concrete/cement plaster as per manufacture instruction all as directed by Engr-in-Charge. Make : DR. FIXIT PIDEPROOF LW,CICO, FOSROC. |
| 9 | M&L for Preparing Newly Plastered Surfaces of walls and applyingtwo coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over one coat ofJK/cement base puttycomplete all asspecifiedand directed by Engineer-in-Charge. |
| 10 | Supply and fixing galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc. complete all as specified and as directed.NOTE :- Each line of wire shall be measured. |
| 11 | M&L 90 cm dia concertina coil reinforced punched (chrome rajor or blade wire) with barbed top of 0.50mm thick galvanised steel sheet and core wire of dia 2.50mm of high tensile steel wire including galvanised MS staples/clips for tying at crossing and removing old coil,any size complete allas specified and directed. |
| 12 | S&F PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed |
| 13 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 14 | M&L TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, plinth beam, pilecaps, pile etc. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Eng-in-Charge. |
| 15 | M&L TMT bars 5mm to 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, plinth beam, pilecaps, pile etc. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in strirrups complete all as specified and as directed by Eng-in-Charge. |
| 16 | Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles |
| 17 | Demolition of Concrete of any description & in any position not otherwise specifically provided for (unreinforced) |
| 18 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 19 | Dismantling Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 20 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified |
| 21 | Dismantling Galvanised Concertina Coil,any dia and at any position |
| 22 | Surface Excavation n exc 30 cm deep and averaging 15 Cm deep and getting out in any soft/looe soil. |
| 23 | M&L for excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting outin Soft/loose soilcomplete all as specified and directed. |
| 24 | M&L for Rough finished flat surfaces concrete Formwork toFormwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as directed by Engr-in-Charge |
| 25 | M&L for Reinforced cement concrete ,Nominal mix type B1, 1:2:4 (20mm graded aggregates) inFoundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and massconcrete all asspecifiedand directed by Engineer-in-Charge. |
| 26 | M&L hard core of broken stone gauge n.exc 63 mm all as specified and directed by Engr-in-Charge. |
| 27 | M&L providing 100mm thick cement concrete 1:4:8 type D-2 using 40mm graded aggregate in sub base of floor complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L providing 40mm thick cement concrete 1:2:4 type B1 using 20mm graded aggregate in base of floor to recevie tile works complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and as directed by Engr-in-charge. |
| 30 | Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point all as specified and as directed by Engr-in-charge. |
| 31 | M&L for 75mm thick PCC (1:3:6) type C-2 with using 40mm graded stone aggregates as in plinth protection laid in panels and finished even and fair including necessary form work complete all as specified and as directed. Note: Joints 12mm wide joints to full depth of PCC shall be provided at every 3 meters interval and at every change of direction and shall be filled with mixture of bitumen and sand in 1:3 by weight . Cost of provision shall be deemed to be included in quoted rate of this item. |
| 32 | S&F prepainted galvalume alumnium zinc coating GI based currugated steel sheet 0.5mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 33 | S&F prepainted galvalume alumnium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 34 | S&F Steel work in tubular trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleatsincluding special shapedwasher etc. complete usingERW or induction butt weldedtubes conforming to I.S.1161 1979 grade St.-24 |
| 35 | M&L joint free non skid ceramic coloured tile 7 to 8mm thick (square /rectangulararea of each tilesexceeding 0.18 sqm but not exceeding0.38 Sqm) in floor over 15mm thick screed bed in cementmotar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the tile all as directed by Engr-in-Charge. |
| 36 | M&L for glazed ceramic coloured designer concept tiles600x300x10-8mm size as in walls set and jointed in neat cementslurry over 10mm thick recuing in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etcall as specified and as directed by Engr-in-Charge. |
| 37 | Rendering 10mm thick in fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cementall as specified. |
| 38 | M&L for Preparing New Plastered Surfaces of WALLS and applying TWO COATS of DISTEMPER OIL EMULSION (OIL BOUND WASHABLE DISTEMPER) over a Coat of CHALK WHITING, complete all as specified and as directed. by Engineer-in-Charge. (Note:- work will be strictly executed by mechinised means/ tools as required for smart periodical services) |
| 39 | S&F powder coated (Thickness or powder coating not less than 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F powder coated (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) completeallasspecified. complete all as specified and directed by Engineer-in-Charge. |
| 41 | S&F 8 to 10mm thick densified reqular edged eco friendly light weight calcium silicate false ceiling tiles size 600x600mm including main \"T\" runner of size 24x38mm made from 0.33 mm sheet hot deep galvanized steel sectionframe with all necessary acessories as directed by Engr-in-Charge. |
| 42 | S&F 4.0mm thick Figured glass, pin head ty pe and glazing with oil putty in squares exc 0.5 sq. m in each pane fixing to Aluminium/Steel/wooden Sections as in Panel of Doors/Windows/Ventilator and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site(s), complete and fixed all as specified and as directed. |
| 43 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing all as per specified and directed by Engr-in-Charge. |
| 44 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain printed PVC Sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beaading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; supplying & fixing in the frame at site as per specification & drawing all as specified and directed by Engr-in-Charge. |
| 45 | S&F mild steel cold rolled medium weight butt hinges 100mm long complete all as specified directed by Engr-in-Charge |
| 46 | S&F of 150 mm length aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-In-Charge. |
| 47 | S&F 300 mm length of bolt aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-In-Charge. |
| 48 | S&F of aluminium handles, cast type anodised of 150 mm size. complete all as specified and directed by Engr-In-Charge. |
| 49 | S&F CPVC water tubing 20 mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface, along with primer & slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D 1785, fitting/ flanges shall be as per ASTM D2467 all as specified and directed by Engr-in-charge. Note : Pipe and fittings made from CPVC shall be clearly marked with manufactures name and trade mark. |
| 50 | S&F for steel water tubing 20mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and connected complete all as specified and as directed by Engineer-in-Charge. |
| 51 | S&F 60 cm long PVC connection with two nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe of existing one completeall as specified and as directed by Engineer-in-Charge. |
| 52 | S&F of PTMT waste coupling 32mm bore of discharge (Half or full threaded) Min weight 45 gms, completeall as specified and as directed by Engineer-in-Charge. |
| 53 | S&F ofPTMT waste pipe 32 mm bore 80 cm long completeall as specified and as directed by Engineer-in-Charge. |
| 54 | S&F Rotational moulded Polyethylene (HDPE) Water Storage Tank 500 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all asspecified and directed byEngineer in charge. |
| 55 | S&F 600mmx450x5mm or equivalent frameless modern mirror with bevelled edge selected quality glass, mounted on wall with stud screws complete in all respect as specified and directed by Engr-in-Charge. |
| 56 | S&F 20mm Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete in all respect as specified and directed by Engr-in-Charge. |
| 57 | S&F stainless steel floor grating with hole or without hole all as specified and directed by Engr-in-Charge. |
| 58 | M&L stack clamps for 100 bore pipe as in repairs out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts and securingend of stays to wall or roofs complete all as specified and as directed. |
| 59 | S&F 110mm Bore PVC (SWR)pipes single socketed in any length with rubber ring joints fixed to wall completeall as specified and as directed by Engineer-in-Charge. |
| 60 | S&F 75mm Bore PVC (SWR)pipes single socketed in any length with rubber ring joints fixed to wall completeall as specified and as directed by Engineer-in-Charge. |
| 61 | S&F PVC bends110mm dia complete all as specified by Engineer-in -Charge |
| 62 | S&F PVC (SWR) vent cowl for 110mm dia pipe complete all as specified by Engineer-in -Charge |
| 63 | S&F 110mm Bore PVC (SWR) \"P’ trap complete all as specified and directed by Engr-in-Charge. |
| 64 | M&L 75mm (Diameter of outlet) PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F wash down water closet (pedestal pattern) of any colour including fixing of bolts completeall as specified and as directed by Engineer-in-Charge. |
| 66 | S&F 10 ltr capacity PVC valveless syphonic action type flushing systern low level white with inlet ball valve ,float & handle including brackets completeall as specified and as directed by Engineer-in-Charge. |
| 67 | S&F for vitreous china wash basin hand white flat backsize 550x400 with pedestal including cutting for and pinning in ends of brackets including fixing of 32 mm low dencity polylethyne pipes (LDPE)of pressure rating 6kg/cm2, cupling ,PVC connection with 15 mm dia PTMTcheknuts ,CP Piller cock fancy type completeall as specified and as directed by Engineer-in-Charge. |
| 68 | S&F vitreous china coloured half stall urinal brass chromium plated brackets , fittingand waste coupling, CP bottle trap , urinal spreder , PVC connection etc completeall as specified and as directed by Engineer-in-Charge. Make Cera, Hindware, Jaquar or equivalent |
| 69 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed by Engr-in-Charge. Make : Marc/ Cera/ Jaquar |
| 70 | S&Fbib taps 15mm bore long bodycast copper alloy fancy type chormium plated butter fly handle screwed down including completeall as specified and as directed by Engineer-in-Charge. Make Cera/ Marc/ Jaquar |
| 71 | S&F angle/ stop valves 15mm bore (for iron pipe)fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends completeall as specified and as directed by Engineer-in-Charge. |
| 72 | M&L for 110mm dia pipe, Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and as directed. |
| 73 | S&F 75mm Bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 74 | M&L for Brick work with sub-Class ‘B’ bricks (with old size bricks), straight or curved on plan exc. 6m mean radius, built in cement mortar 1:4, complete all as specified and as directed. |
| 75 | M&L for Rendering 15mm thick on inside face of of brick work in cement mortar 1:3 in manhole, finished plastered surfaces even and smooth with using extra cement, complete all as specified and as directed.(WPC measured and paid separetly) |
| 76 | M&L for providing cement concretetype B-I , 1:2:4(using 20 mm graded crushed stone aggregate)as in channels, hold fast moulds , roof kerbs or mud stops, rounded or chamfered on edges complete all as specified |
| 77 | S&FPrecast Cement concrete manhole/drain cover of size 900mm x 450mm x 70mm thick srounded with steel strip 70x1.25mm Reinforced as per manufacturer\"s design in Munufactured proccess complete all as specified and as directed by Engr-in-Charge. Make of SFRC Manhole/drain cover and frame :(a) M/s PS Concrete.(b) M/s KK Manhole.(c) SS Or equivalent as approved by GE. (ii) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover. |
| 78 | M&L forsalt glazed stone ware gully traps square or roundedmouthed type ‘P’ of size 150x150mm embedded in PCC 1:3:6 type C-1 with and necessary brick work, plastering etc complete and connecting to pipe all as directed by Engineer-in-charge. |
| 79 | M&L for cement concrete 1:3:6 (20mm Graded crushed stone aggregate) Bed for drain pipes of bore 100mm including packing under and haunching against the sides of pipes after they are laid in foul condition and testing, complete all as specified and as directed. |
| 80 | Schedule-A(E/M) |
| 81 | Material and labour for maintenance free safe earthing system UL 467 approved/ CPRI tested copper bonded ( copper cladded earth rod with 250 microns of copper cladding) earth rod 17.2 mm dia. 3.0 mtr long electrode buried in ground to bore holes 120 mm dia. vertically to a depthnot less than 3.50 Mtr deep below ground level with top edge of earth electrode at a depth not less than 0.5 mtr below normal ground level with copper earth lead strip 25mm x 3mm and further connected to test point terminal block all as directed. Earth pit shall include minimum 50 Kg (two bags of 25 Kg each) NABL Lab Certified back fill compound for filling bore holes with mother soil mixed in 1:3 ratio (one part of back fill compound and three parts of mother soil), so as to achieve earth resistance below 5 Ohm including excavation of polypit chamber with polyplastic pit cover (cost of polypit chamber with polyplastic pit cover shall be deemed to be included in the rate quoted) complete all as specified and as directed by Engineer-in-Charge.Notes :(a) Copper strip more than 7.5 Mtrs shall be measured and paid separately under respective item of schedule.(b) Earthing resistance result shall be less than 5 Ω .If the result comes more than 5 Ω, the contractor shall carry out the earthing at separate location /site given by the Engr-in-Charge after taking out of earth electrode without any extra cost to the deptt.The earth resistance shall not be more than 01 ohm upto 05 year and contrator shall also deposit the security amount of Rs.2000/- per earthing as gurrenttee for 05 year.(c) Test point terminal block shall be measured and paid separately.(d) If resisatance of soil required grid then the set of 4 Electrode to be buried in ground and interconnected with copper strip bus bar and this strip shall be measured and paid seperately. |
| 82 | Material and labour for 20 x3.15 mm copper strip as earth continuity conductor or main earthing lead fixed to wall on porcelain insulator of suitable size as a separator between wall and strip not an interval more than 45 cm connected with test terminal point etc. complete including fixing with saddles and screws for fixing porcelain / epoxy insulators / conduit pipe complete all as specified and as directed |
| 83 | M&L in replacement for GI pipe light grade of size 40mm dia.for laying in trenches/ under floor/on walls for protection of UG cables complete all as specified and directed . |
| 84 | Material and labour for making PCC block of size 25 x 25 x 25 cm by providing precast cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) and setting in cement mortar 1:4 for arresting GI pipe post on the roof top of the building complete all as specified and as directed |
| 85 | M&Lfor making stand post (1 m long) each made out ofGI Pipe 50 mm dia medium grade for fixing on the roof top of the building, etc.complete all as specified and directed. |
| 86 | S&F Air termination, single pointed, copper rod 12mm dia and 300mm longof superior quality of the rod for fixing on stand post on the rooftop of the building etc. complete all as specified and directed. |
| 87 | Material & Labour for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm, drilled and screwed including 3 nos. 8mm dia 25 mm long hexagonal head screw and connected to copper / Aluminium / GI strip incl strip overlapped and rivetedd complete housed in a PVC junction box complete all as specified and as directed. |
| 88 | Supply and fixing Flameproof LED flood light 150watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 89 | M&L for Point wiring complete with FRLS PVC insulated unsheathed , 1100 V grade conforming to IS 694 ,1.5 Sqmm (Norminal area) multistranded ,copper conductor cable drawn through in stove enamelled steel conduit medium grade ,minimum 20 mm dia conceled in wall , ISI Marked, and connect accessories, mounting onsuface of walls / ceilings /roofs etcincluding provision of FRLS PVC insulated unsheathed 1.5 Sqmm muiltistranded green colour copper conductor cableas earth connectivityand connecting to common earth dolly for One light point controlled by one way one switch SP 5 Amp, 240 Volts complete alongwith matching the surface with the existing paint all as specified and directed . |
| 90 | S&F in replacement of switch flame proof weather proof rotary type with termination box in LM6 , 16 Amps ,240 voltsduly approved by CSIR-CIMFR Dhanbadcomplete all as specified.Make: Sudhir/Shyam / Bajaj / Crompton |
| 91 | Switch piano,flush type,single pole one way,6Amps 230 volts complete all as specified |
| 92 | S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete.Make:- Anchor/SSK/Cona |
| 93 | M&L for sheet metal enclosure MCB DB, SPN, 240 volts, 4 way, single door type grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections complete as directed |
| 94 | Supply and fixing 240V, 10 KA \"C\" curveMCB SPN and current carrying capacity 32 AMP Complete with connection testing and commissioning. |
| 95 | Supply and fixing 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 96 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 97 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complet |
| 98 | Supplying and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 sqmm 2 core complete all as specified and directed |
| 99 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed |
