|
| 1 | S&F wall paneling using 12mm thick water proof ply fixed with screws to timber frame work over 1mm thick decorative laminated sheetcomplete all as specified and directed. |
| 2 | S&F poly carbonate/louvers sheet 4-5mm thick over 12mm thick plywood fixed with adhesive complete all as specified and directed |
| 3 | S&F \"T\" strip (SS decortive fixed in grooves) complete all as specified and directed. |
| 4 | S&F Aluminium Square pipe 50 x 50 x 3mmwith L corner fitting at the back side of panelling for level the surface complete all as specified and directed. |
| 5 | M&L for plain fillets of 2nd class hard wood of size 3 Sqcm to 6 sqcm square, rectangular clean sawn, secured with nail or brads complete all as specified and directed. |
| 6 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50m and lift up to 1.5m in all kind of soils complete all as specified and directed. |
| 7 | Excavation in all kind of soils by mechanical means (Hydraulic excavator) over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m complete all as specified and directed. |
| 8 | M&L providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level 1:3:6 (1 Cement : 3 coare sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed. |
| 9 | M&L providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 2 coare sand (zone-III) drived from natural sources : 4 graded stone aggregate 40mm nominal size derived from natural sources) complete all as specified and directed. |
| 10 | M&L for PCC block masonry with solid blocks Type C1 1:3:6 using (20mm graded coarse aggregate) exc 10 cm in width and setting in CM 1:6 complete all as specified and directed. |
| 11 | M&Lrendering 15mm thick in cement mortar 1:4 on other then fair faces of PCC Block, finished fair and even without using extra cement complete all as specified and directed. |
| 12 | M&L cement plaster (in coarse sand) 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cment : 4coarse sand) complete all as specified and directed. |
| 13 | M&L for exterior finisheing : finishing walls with Arcrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @2.20 Kg/10Sqm complete all as specified and directed. |
| 14 | M&L for Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coare sand, filling the joints with line sand etc complete all as specified and directed. |
| 15 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) complete all as specified and directed. |
| 16 | Providing and laying at or near ground level factory made kerb stone of M 25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 17 | M&L for preparation of old concrete surface/kerb stone of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
