|
| 1 | Dismantling floor, hearth or wall tilesincluding cement mortar, concrete bedding andremoving rubbish off the premises complete all as specified and directed. |
| 2 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.00 Kg of cement per sqm, complete all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | M&L for First quaility light coloured Fully Vitrified tiles of 10mm thick (square/Rectangular), polished area of each tiles n.exc 0.36 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6), complete all as specified and directed. |
| 5 | All as per item No 4 above but as in skirting on vertical surfaces over 10 mm thick backing coat in cement mortar (1:4), complete all as specified and directed. |
| 6 | M&L for 1st quaility coloured Non skid ceramic tiles, 7 to 8mm thick, (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, incl screed bed or bedding layer of 15mm thick for laying floor finishes in cement mortar (1:6), complete all as specified and directed. |
| 7 | M&L for 1st quaility coloured Glazed ceramic tiles of size 300x450mm & 6-7 mm thick on vertical surfaces of wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement moratr (1:4) as backing coat to wall tiles such as dado/skirting on vertical surfaces, complete all as specified and directed. |
| 8 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished ) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment ot match with shade of granite over a coat of 15mm thick screed bed laid in cement mortar (1:6), complete all as specified and directed. |
| 9 | M&L for 75mm thick, Plain cement concrete, type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection, verandah or path etc including necessary formwork & dummy joints laid in panels, complete all as specified and directed. |
| 10 | Taking down chowkats or frames not exc 1.5 sq.m eachwith shutters (without taking off shutters from the frames)complete all as specified and directed. |
| 11 | Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 12 | Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone,concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed. |
| 13 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed. |
| 14 | S&F factory made soilid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC \"C\" channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 15 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 16 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: Stainless steel butt hinges and necessary SS screws shall be measured and paid separately |
| 17 | S&F 5mm thick, Figured glass, pin headed type and glazing with oil putty, in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 18 | S&Ffor Factory made solid panel PVCwire gauge door shutter 30 mm thick (style) with both side prelam PVC sheet,consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of wire gauge to be fitted in the M.S. frame welded / sealed to the stiles & rails .The wire gauge shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tube. The wire gauge shall be streched to tighten firmly including supply and fixing in the frame at site as per specification and drawing, complete all as specified and directed. |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size65 x150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. |
| 20 | S&F in repair powder coated (Min thickness of powder coating 50 micron) anodised aluminium frame for doors, windows with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. |
| 21 | S&FPowder coated (Min. thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.), complete all as specified and directed. |
| 22 | S&F factory made Windows made of Pre Painted Steel (Based on as per IS 513 On 0.58 MM Thick \"D\" quality galvanised as per IS 277 with Zinc coating of 120 GSM) Primer coated with epoxy primer of 5-7 micron thick, finished painted with a polymer paint of 12-16 micron thick and back coat with 5-7 microns thick alkyd backer section of outer frame should be 72X55 MM, centre mullion should be 72X5MM, section for fixed glass beading should be 12X12MM, and section of air tight shutter should be of 48X25MM with groove for gasket outter frame and mullion sections to have rebate for glazed shutter, fly mesh and 2 MM provisions for guardbars/ grills fly mesh shutter section should be of 2X4 MM. The section are to be cut to length mitre joined with corner bracket centre mullions to be fixed with mullion cap 2 nos handle of heavy duty SS pivot hinges shall be provided per shutter. The windows should be panelled with 4 MM thick plain float glass and SS mesh for fly mesh shutter (304 Grade). Rubber gasket are provided all around the glass. The above frames should be fixed to the concrete/ masonry wall by means of self expanding screws including 10 MM square guard bars with 6\"(15 2.4MM) pitch complete all as specified and directed. |
| 23 | S&F 200mm aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed |
| 24 | S&F 300mm aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 25 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 26 | S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed. |
| 27 | S&F floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed. |
| 28 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples, complete all as specified and directed. |
| 29 | S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples, complete all as specified and directed. |
| 30 | S&F 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifed and as directed |
| 31 | M&L in repair 18/19 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face,fixed for copboard shutter, shelve, partiion & kitchen cabinet, complete all as specified and directed. |
| 32 | Demolition brick work or stone/boulder masonary,built in cement mortar or cement lime mortar including all quions, arches pillars,etc but ashlar facing dressed stone work and precast concrete articles, complete all as specified and directed. |
| 33 | M&L for brickwork using old size bricks Sub-class \"B\" straight or curved on plan exc 6m mean radius built in cement mortar (1:6), complete all as specified and directed. |
| 34 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 35 | M&L for rendering 15mm thick cement plasterin cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with WPC @ 3% by weight of cement, complete all as specified and directed.Note:- WPC shall be measured and paid separately. |
| 36 | M&L for rendering 15mm thick cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfacesfinished even and smooth without using extra cement, complete all as specified and directed. |
| 37 | M&L for rendering 5mm thick cement plaster in cement mortar (1:3) on fair faces of brickwork or concrete surfaceson ceilling, finished even and smooth without using extra cement, complete all as specified and directed. |
| 38 | Supply only Integral waterproofing compound, complete all as specified and directed. |
| 39 | M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete all as specified and directed. Note:- Payment for providing grooves shall be measured and paid separately. |
| 40 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens,nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed. |
| 41 | M&L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint, complete all as specified and directed. |
| 42 | M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of 3mm thick wall care putty, complete all as specified and directed. |
| 43 | All as per item No 42 above but on ceiling. |
| 44 | M&L for Complete removal of existing treatment including preparation of surfaces and applying two coats of weather proof emulsion of electric blue or white colour over a coat of exterior wall primer in (projections of column/wall/edges of chajja, roofs and other narrow locations in buildings upto ground plus three floor), complete all as specified and directed. |
| 45 | M&L for complete removal of existing treatment on walls including preparing old plaster surfaces and applying two coats of cement based paint over a coat of 3mm thick external wall care putty, complete all as specified and directed. |
| 46 | M&L for complete removal of existing treatment on walls including preparing old plastered surfaces and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty, complete all as specified and directed. |
| 47 | All as per item No 46 above but on ceiling surfaces |
| 48 | M&L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer all as specified and directed. |
| 49 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed . |
| 50 | M&L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coat of synthetic enamel paint (ordinary tint), complete all as specified and directed. |
| 51 | M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed. |
| 52 | M&L PCC type B1(1:2:4), using 20mm graded stone aggregate as in stagging for water tanks, inserting hold fast and filling Jamb etcand like including weathering slighly rounded or chamfered and where connecting slab and parapets etc angles throating, complete all as specified and directed. |
| 53 | Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to store complete all as specified and directed. |
| 54 | S&F 500Ltrs capacity, tripple layer, rotational molded polyethylene water storage tanks , ISI marked (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR Part-I with GI Tank Nipple inlet and outlet 20mm dia, complete all as specified and directed. |
| 55 | S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod &highdensity plastic ball screwed for iron pipe and fixed, (Minimum weight 20 mm - 210 gms), complete all as specified and directed. |
| 56 | S & F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 57 | M&L for reparing of RCC projection, chajja, roof facia, cellingby scrapping, cutting, derusting and cleaning exposed reinforcement surfaces of damaged loose RCC surface and applying neat cement slurry @ 3 kg/Sqm and filling the surface with cement plaster1:3 one or two layer as reqd or PCC 1:2:4 as directed by Engr-in-Charge with or without facia and smooth finished and smotth edgesincl two coats of finished to match with the existing surface at any height and in any situation including necessary form workcomplete all as specified and directed. |
| 58 | Taking down carefully existing bitumen tar felt including plaster, concrete/brick coba /tiling from the roof /parapets till RCC slab and roughening the surface ,wire brushing , cleaning and washing with water etc, and removing the rubbish to a distance exceeding 500m but n.exc 1Km & depositing where directed, complete all as specified and directed. |
| 59 | Material and labour for Roof treatment on RCC roof slab incl testing completeas mentioned below, all as specified and as directed:-(i) Cleaning the concrete surfaces of RCC roof slab as obtainedafter demolition/taking down of existing water proofing treatment thoroughly with wire brushes, washed and dried.(ii) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampnessall as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness.(iii)Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm.(vi) Cleaning the plastered roof surfaces and applying a coat of bitumen primer @ 0.3 kg/sqm on top of dry surface.(v) applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/SqmincludingAPP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3 mm thick reinforced wih polyster non woven fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm |
| 60 | S&F in repair Harrison curtain rails, 19/20mm dia,anodised aluminium alloy with fixing brackets, stops, rollers etc including taking down old one, complete all as specified and directed. |
| 61 | Taking out/taking down old unserviceable damaged GI water tubing pipe of 15 mm size from excavated trenches or from wall/floor including removing of fittings all as specified and directed. |
| 62 | Taking out/taking down old unserviceable damaged GI water tubing pipe of 20 mm size from excavated trenches or from wall/floor including removing of fittings all as specified and directed. |
| 63 | S&F 15mm bore tubes \"medium grade\" galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, completet all as specified and directed. |
| 64 | S&F 20mm bore tubes \"medium grade\" galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, completet all as specified and directed. |
| 65 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed. |
| 66 | S&F in repairs 15mm bore bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, completet all as specified and directed. |
| 67 | S&F shower roses, brass, chromium plated with or without swivel joints 125mm size with CP arm, incl fixing to steel pipe complete all as specified and directed. |
| 68 | S&F in repairs stop valves, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 69 | S&F in repair Vitreous china squatting pan of Orissa Pattern size 580x 440 mm white with ‘P’ or ‘S’ trap, front or back inlet but excluding flushing cistern and flush pipe fixed, including placing in position in floor and embedded in Lean cocnrete of PCC (1:7:12), type E-1 using brick bats and finishing the top surfaces to match with the existing flooring, complete all as specified and directed. |
| 70 | S&F in repairWash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified and directed. |
| 71 | S&Fin repairs stainless steel sink with drainage board made out of1 mm thick ss sheet, kitchen or laboratory sinkwith plugs , washers and wasts , including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm, complete all as specified and directed. |
| 72 | S&F in repair 32 mm dia,PVC waste pipe suitable for waste coupling, complete, all as specified and directed. |
| 73 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 74 | S&F in repairs angle valves, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 75 | S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 76 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed. |
| 77 | S&F in repairs 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thickcommercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 78 | S&F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard ,and railing 60 cm long complete all as specified and directed. |
| 79 | S&F in repairs PVC valveless, syphonic action type flushing cistern, lowlevel , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed. |
| 80 | S&F in repair Waste coupling, 32mm dia, of PTMT (half or full threaded) .(Minimum weight 32mm-45gms) complete all as specified and directed. |
| 81 | M&L PVC (SWR) floor trap 75 mm dia of outlet , plain with grating including jointing with solvent cement complete all as specified and directed. |
| 82 | Taking down rainwater pipes/PVC pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories), complete all as specifid and directed. |
| 83 | S&FPVC (SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls withPVC brackets/clamps complete all as specified and directed. |
| 84 | S&FPVC (SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls withPVC brackets/clips complete all as specified and directed. |
| 85 | S&F110 mm diabore PVC (SWR) bends any radius complete all as specified and directed. |
| 86 | S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed. |
| 87 | S&F 75 mmPVC (SWR) bends any radius complete all as specified and directed. |
| 88 | S&F 75 mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed. |
| 89 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 90 | S&F in repair75mm bore dia PVC (SWR) pipes single socketed, inanylength with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 91 | S&F in repair 110mmbore dia PVC (SWR) pipes single socketed, inanylength with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 92 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 93 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in loose and soft soil complete all as specified & directed. |
| 94 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. |
| 95 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 96 | M&L 15mm thick screed bed or bedding layer of cement mortar (1:6), for laying floor finish, complete all as specified and directed. |
| 97 | M&L pre coated coloured Chequered concrete tiles of size 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed in cement motar (1:6) complete all as specified and directed.Note : Colour and design of tile shall be approved by GE. |
| 98 | Removing building material, debris etcto a distance of 2.5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination, complete all as specified and directed by Engineer-in-Charge. |
| 99 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over & including 15mm thick screed bed in cement mortar (1:6), complete all as specified and directed. |
| 100 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in cement mortar (1:4) and jointed complete all as specified and directed |
| 101 | M&L for anti termite treatment of soil under existing floors using emulsion @ one litre per hole , 300 mm apart including drilling and plugging , 12mm dia holes with cement mortar 1:2 (1 cemnt: 2 coarse sand) to match the existing floors copmplete all as specified and as directed. |
| 102 | M&L for ATT along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed. |
| 103 | S&F300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 104 | S&F Kicking plates, any size, of galvanised iron sheet 1mm thick, fixed with galvanised screws complete all as specified and directed. |
| 105 | S&F RCC Rectangular SFRC Manhole cover(with steel strip) size(1200x400x70mm), complete all as specified and directed. |
| 106 | Taking Down carefully Copper/aluminium Point Wiring (light, fan,socket or Power) complete, including fixture and fittingssuch as switches, ceiling roses, pendents, regulators sockets etc, removing materials to store for keeping in safe custody or for taking credit as per condititions seperately and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. |
| 107 | M&L for point wiring in repairs complete with 1.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 volts grade FRLS cable IS-694 marked drawn throughand includingrigid non metallic PVC heavy duty concealed conduit(min 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.12.5 of SSR Part I ) ISI marked with wall thickness not less than 1.8mm including conduit accessories likebends.tees, juction boxes etc fixed concealed in wall/ceiling or surface conduit on ceiling with provision of 2 mm thick pressed steel terminalboxes covered with 3 mm thick plastic laminatedwhite /coloured top cover for mounting switch,socket,fan regulator,industrial socket and all lamp fittings etc including 1.5 sq mm PVC insulated but unsheathed copper conductor FRLS cable,1100 volt grade IS-694 marked as earth contuinity wire for one light/Fan point controlled by one,one way switch complete all as specified and directed. |
| 108 | Allas per ItemNo 107 above but on the same boardwith other switches with 1.5 sq mmPVC insulated copper conductor for continuous earthing. |
| 109 | Allas per itemNo 107 above but one three pin 5 Amps socket out let on independant board with1.5 sq mmPVC insulated copper conductor for continuous earthing . |
| 110 | Allas per item No 107 above but 15 Amps3 pinsocket outleton independent board with 2.5 sq mmPVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single corefor continuous earthing. |
| 111 | Allas per item No 107 above but one bell/buzzer point controlled by one push button on same board with other switches on the same board with other switches or independent with cables of size 1.5sqmm. |
| 112 | Allas per item No 107 above but for Single pole and neutral enclosure with 4.0 sq mmPVC insulated and sheathed copper conductor with 4.00 sq mm PVC insulated copper conductor single corefor continuous earthing . |
| 113 | All as per item No 107 above but one light pointcontrolled by two2 way 5 Amps switch. |
| 114 | Taking down carefullyaluminum two core sub main wiring of sizes 6 Sqmmand 4 Sqmm cable any type and removing old material from site and making good disurbed surface complete all as specified and directed. |
| 115 | M&L in repairs,two single core PVC insulated cable with copper conductor multi stranded 6 Sqmm in and incl. duly drawn through and including concealed PVC conduit suitable size as sub main with continuous earth wire 6 Sqmm size and connecting to common earth dolly complete all as specified and directed. (Flexible Copper Wire Used shall be FRLS) |
| 116 | M&L in repairs,two single core PVC insulated cable with copper conductor multi stranded 2.5 Sqmm in and incl. duly drawn through and including concealed PVC conduit suitable size as sub main with continuous earth wire 2.5 Sqmm size and connecting to common earth dolly complete all as specified and directed. (Flexible Copper Wire Used shall beFRLS) |
| 117 | S&F Piano switch in repairs, flush button single pole one way 6 Amp complete all as specified and directed. |
| 118 | Supply and fix switch flush type 5 Amps single pole two way complete all as specified and directed. |
| 119 | S&F socket outlet, in repairs, flush type 2 in 1, 3 pin 6 Amp complete all as specified and directed. |
| 120 | S&F socket outlet, in repairs, flush type 2 in 1, 3 pin and 6/16 Amp complete all as specified and directed. |
| 121 | S&F Piano switch in repairs, flush button single pole one way 16 Amp complete all as specified and directed. |
| 122 | S&Fstepped type electronic fan regulator, in repairs, flush type on the existing phenolic laminated sheet etc complete all as specified and directed. |
| 123 | S & F Sheet metal Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 V complete all as specified and directed. |
| 124 | Supply and fix sheet metal enclosures forMCB distribution board 230 VoltsSinglepole and neutral 8 way Double door with 200 Amps rated busbar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface complete all as specified and directed. |
| 125 | S&Fin repairs,MCB SP 6-32 Amps,\"B\" series 240 Volts complete all as specified and directed. |
| 126 | S & Fin repairs,MCB SPN 32 Amps,\"B\" series 240 Volts complete all as specified and directed. |
| 127 | S & F in repairs Bell Multi Music type, 240 Volts complete all as specified and directed. |
| 128 | S&F bell push, in repairs, flush type 5 Amps complete all as specified and directed. |
| 129 | S&Fin repairs,ceiling rose surface backlight, 65 x 50 mm three terminals complete all as specified and directed. |
| 130 | Supply and fixing LED , Tube light fitting 20 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting complete all as specified and directed. |
| 131 | Supply and fixing LED , Tube light fitting 12 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting complete all as specified and directed. |
| 132 | S&F in repair energy efficient LED building secruity lights 1x30W with lens, PDC aluminium body and toughened glass visor fitted in frame secondary optical lens for superior light distribution efficay >100 Lm/W, CCT 5700K, IP-65 complete with bracket/clamps, nut bolts and washers suitable for fitted in building complete all as specified and directed. |
| 133 | S&F Fresh Air fan 250 mm sweep, 240 Volt AC single phase completed all as specified and directed. |
| 134 | S&F exhaust fan heavy duty metal body with louvers of size 300mm sweep, 1400 RPM and fixing arrangements complete all as specified and directed. |
| 135 | M & L in repairs earthing complete with galvanised steel earth plate electode 600 x 600 x 6.0 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level connected to & including galvanised steel wire 4.0 mm diasize means of nuts and bolt check nuts and washers of galvanised rion sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to earthing test point complete including testing filling of adquate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made out of6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed. |
| 136 | Cutting the existing CI/GI pipe of size 25/40/80mm bore such as Bend,tee, reducer ,coller etc and inserting new tees, branches etc for taking out connectionup to 40mm complete all as specified and directed. |
| 137 | Supply and lay pipe galvanised GI Tubing medium grade 25 mm in wall/floor/Pillar and connection in old or new position including fitting like socket/union/Tee/Reducer Nipple etc complete all as specified and directed. |
| 138 | Supply and laying pipe galvanised GI Tubing medium grade 20 mm in wall/floor/Pillar and connection in old or new position including fitting like socket/union/Tee/Reducer Nipple etc complete all as specified and directed. |
| 139 | S&F Gate/Stop valve 25 mm cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed handle, screwedd both ends for iron pipe or for unions, complete all as specified and directed. |
| 140 | S&F Gate/Stop valve 20 mm cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed handle, screwedd both ends for iron pipe or for unions, complete all as specified and directed. |
| 141 | S&F Plug type bib taps, cast iron, screwed for iron pipe of size 15mm complete all as specified and directed. |
| 142 | S&F electric Wall Mounted electric Chimney 60 cm 1500 m³/hr BLDC Filterless Thermal Autoclean Kitchen Chimney, Curved Glass with Aeration technology, Touch and Gesture Control,Black Suitable for 2-4 Burners with 3D Filter and Suction Power. Made up of Material: Stainless Steel Body EDS3 Technology, Deep Silence Mechanism, LED Lamp with 1 Year Warranty including complete electric connection as per site requirement complete all as specified and directed. |
| 143 | Supply and fix wall mounted cabin fan super high speed portable 450 mm sweep,220-240 volt AC,50 Hz sigle phase with Thermal overload protected motor complete all as specified and directed. |
| 144 | M&Lpoint wiring with 1.5 Sqmm (Nominal area) PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper concuctor in and including PVC concealed conduit and conduit accessories along with continuous earth wire 1.5 Sqmm PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including complete with all accessories for one three pin 5 Amps socket out let on independant board with1.5 sq mmPVC insulated copper conductor for continuous earthing complete all as specified and directed. |
| 145 | Allas per item No 144 above but 15 Amps3 pinsocket outleton independent board with 2.5 sq mmPVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single corefor continuous earthing complete. |
| 146 | S&F Piano switch in repairs, flush button single pole one way 6 Amp complete all as specified and directed. |
| 147 | S&F socket outlet, in repairs, flush type 2 in 1, 3 pin 6 Amp complete all as specified and directed. |
| 148 | S&F socket outlet, in repairs, flush type 2 in 1, 3 pin 6/16 Amp complete all as specified and directed. |
| 149 | S&F Piano switch in repairs, flush button single pole one way 16 Amp complete all as specified and directed. |
| 150 | M&L two single core PVC insulated cable with copper conductor multi stranded 4 Sqmm in and incl. duly drawn through and including PVC casing caping suitable size as sub main with continuous earth wire 4 Sqmm size and connecting to common earth dolly complete all as specified and directed. (Flexible Copper Wire Used In FRLS) |
| 151 | M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathedmulti stranded copper conductor (FRLS) of size 2.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 2.5 Sqmm PVC insulated unsheathedmulti stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through insurface PVCcasing caping ISI marked 20 mm diaalong with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet for provision of switches/regulators complete all as specified and directed. |
| 152 | S & F Sheet metal Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 V complete all as specified and directed. |
| 153 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed. |
| 154 | Supply and lay 15mm (1/2\"\") dia pipe galvanized, \"\" Medium class\"\" ,and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 155 | S & F Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 156 | S & F brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
