Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster on stone/brick wall, ceiling incl raking out joints, hacking for key, scrubbing down with water etc, including removal of rubbish outside MoD land and necessary scafolding upto 4th mtr. complete all as specified and directed. |
| 2 | M&L Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished fair and evenand using WPC, complete all as specified and directed (Note : WPC shall be measured and paid separately. |
| 3 | M&L Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified. |
| 4 | M&L Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified. |
| 5 | Taking down chowkats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each all as specified and directed. |
| 6 | Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each andall as specified and directed. |
| 7 | Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified and directed . |
| 8 | Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applyinga shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed. |
| 9 | Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applyinga shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed. |
| 10 | S & F factory made 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) ; supplied and fitted to chowkats all as specified and directed |
| 11 | S & F flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed. |
| 12 | M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single sideprelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single sideprelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying andfixing in the frame at site as per specification complete all as specified and as directed. |
| 13 | Complete all as item No. 12 herein above but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed. |
| 14 | S&F SolidPVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet &reinforced with MS square tube and fixing in opening as specification& drawing, complete all as specified and directed. |
| 15 | S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 16 | S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long all as specified and directed by Engineer - in – Charge . |
| 17 | S&F 300mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 18 | S & F aluminium handle cast type anodised, 125 mm long all as specified and directed. |
| 19 | S & F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150mm long complete all as specified and directed. |
| 20 | S & F Stainless Steel butt hinges, medium weight100mm size all as specified and directed . |
| 21 | Cutting hole in brick wall built in cement mortar exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B – 1 all as specified and directed. |
| 22 | S&F powder coated anodized aluminum frame for partition, doors, windows, ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 23 | S&F powder coated Anodised aluminium window and ventilator shutters, fixed/side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 24 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 25 | M&L for factory made box type steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed. |
| 26 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and directed. |
| 27 | S & F 4 mm thick Figured Sheet glass , pin headedand glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. Note:- New steel required for glazing glass in steel window will be paid for separately. |
| 28 | S&Ffor 4.8/5.0 mm thick sheet glass ordinary quality and glazingeach pane n exc 0.50 Sqm fixed with neoprenerubber gasket in aluminium frame work complete all as specified. |
| 29 | S&F framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks, grills to balconies fixed to RCC/ brick walls and similar workconforming to Fe-290 Gde-E-165 complete all as specified and as directed by the Engineer-in-Charge. |
| 30 | M&L Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixingconforming to Fe-290 Gde-E-165 complete all as specified. |
| 31 | S&F mild steel plain black sheet0.80 mm thick as in hearths,covering to door shutters , covering to door chowkat etc cut to size edges beaded if directed, holes punched, etc complete all specified and as directed. |
| 32 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified. |
| 33 | M&L, Non-skid ceramic coloured tiles, joint free tiles 7 to 8 mm thick (square/rectangular)of area exc 0.11 Sqm but n.exc 0.18 Sqm , in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified. |
| 34 | M&L First quality, Vitrified ceramic coloured,joint free tiles8 to 10 mm thick (square or rectangular) of size 600 x 600 mm, laid in floors set and jointed with neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified. |
| 35 | M&L First quality, Vitrified ceramic coloured, joint free tiles 8 to 10 mm thick (square or rectangular) of size 600 x 600 mm, on vertical surface set andoverincluding 10 mm thick rendering with cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles,complete all as specified. |
| 36 | M & L first quality coloured glazed ceramic, joint free tiles fixed in pattern of different colour including border of Size aera exc 0.15 Sqm but n.exc 0.20 Sqm & 7-8 mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. Note :- Pattern of the tiles will be decided by GE at the time of execution. |
| 37 | Dismantling Brick tiles or terracing tiles, single layer on roofs, etc complete all as spd and directed. |
| 38 | Demolation of mudin roof any thickness incl plastering & leeping removed complete all as specified and directed by Engineer-in-Charge. |
| 39 | M&L Plain cement concrete (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified |
| 40 | Material and labour 15 mm thickcement plasterin CM (1:4) mixed with WPC as per manufacturer’s instructions @ 150 ml by per bag of cementon concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 41 | Supply only Integral water proofing compound |
| 42 | Cutting groove in brick wall 75 mm wide and 65 mm deep for inserting APP polymer membrane and shaping horizontal face of groove with cement mortar 1:3, including removal of rubbish outside MoD land, complete all as specified. |
| 43 | M&L for water proofing treatment with APP (Atactic Polypropylene) modified polymeric membrane over roof consisting of cleaning of concrete or plaster surface of roof and applying evenly a bitumen primer confirming to IS 3488 @ 0.40 Kg per sqm followed by a tack coat @1.2Kgper sqm using 85/25 grade industrial hot blow bitumen over it laid with APP modified polymeric water proofing membrane minimum weight 3.6 kg/sqm reinforced with non woven polyester fabric ( weight not less than 160 gms per sqm) unrolled and bonded to substrata with logitudinal and end laps 100 including two coats of aluminimum paint ove top surface as per manufacturer\"s instruction complete all as specified |
| 44 | S&F in repairs 25 mm dia Stainless Steel curtain rod with powder coated along with ornamental attachment at both ends and one set of ornamental decorative SS clamps to fixed to walls complete all as specified and directed. |
| 45 | M&L for preparation of new surfaces of wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat pink primercomplete all as directed. |
| 46 | M&L for preparation of newsurfaces of steel or iron work of any description not otherwise described over 10cm width or girth and applying twocoat of synthetic enamel paint over a coat of primer on steel surfaces complete all as specified and as directedby Engr-in-Charge. |
| 47 | M&L Preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying onecoatof synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified. |
| 48 | M&L Preparation of old steel painted surfaces of any description over 10cm width or girth and applying one coatof synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified. |
| 49 | M&L Preparing of new surface of wall and applying twocoatsofexterior emulsion paint over a coat primer on walls complete all as specified and directed by Engineer-in-charge. complete all as specified and as directed by Engineer-in-Charge . |
| 50 | Material and labour preparation of new plastered surfaces and apply two coat of oil bound distmperover a coat ofprimer, complete all as specified and directed. |
| 51 | M &L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified . |
| 52 | M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ceiling surface including applying 2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth upto 4th storey buildings complete all as specified and directed. Note : (a) Stage for Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator. |
| 53 | M&L preparation for old surfaces on wall andapplying one coat ofoil emulsion paint (white or tinted)over a coat of primer with chalk whiting on plastered surfaces complete as specified |
| 54 | M&L preparation of old surfaces on ceiling including cornices pilasterssteel scrappers , wire brushing,and efforescent salts and treating oil and greasy spots and applying two coat of white wash on ceillingcomplete all as specified and directed by Engineer-in-Charge. |
| 55 | Taking down steel tubing/ PVC15mm bore and connections including cleaning for refixing or removing to stores completeall as specified and directed by Engineer - in – Charge. |
| 56 | All as per Srl Item No 55 here in before but 20mm bore all as specified and directed by Engineer - in - Charge. |
| 57 | Supplying and laying of CPVC pipes 20 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 58 | Supplying and laying of CPVC pipes 25 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 59 | S&F 20mm dia Brass TEE for CPVC pipe complete all as specified and directed. |
| 60 | S&F 20mm dia Brass elbow for CPVC pipe complete all as specified and directed. |
| 61 | S&F 25mm dia Tank Adaptor complete all as specified and directed. |
| 62 | S&F 25mm dia union complete all as specified and directed. |
| 63 | S&F 25mm dia Ball Valve complete all as specified and directed. |
| 64 | Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth all as specified and directed. |
| 65 | S & F in repairs chromium plated shower rose 125mm sizeincl shower arm casted 190 mm long flat shape for wall mounted showers with flangeinclfixing to steel pipe or union all as specified and directed. |
| 66 | S&F in repairvitreous china pedestal pattern wash hand basin (flat back) white of size 550x400mmincluding one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector,including cutting for and pinning in ends of brackets completeall as specified. |
| 67 | S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and directed |
| 68 | Dismantling of cast iron or reiforced concrete drain pipes jointed in cement mortar and taking out from trenches 100 / 75 mm bore (sand cast) all as specified and directed by Engineer - in - Charge . |
| 69 | Taking up/down AC soil ,waste and vent pipe 100mm bore size set in CM all as per specified and directed from walls complete all as specified and directed |
| 70 | S&F110mm PVC (SWR) pipes single socketed in any length along with rubber ring joint fixed to walls with all accessories complete all as specified and directed. |
| 71 | S&F PVC bend any radius 110 mm bore complete all as specified and directed. |
| 72 | S & F110mm ,PVC branch pieces (Tee) single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fixed with cement joint complete all as specified and directed |
| 73 | S&F75mm PVC (SWR) pipes single socketed in any length along with rubber ring joint fixed to walls with all accessories complete all as specified and directed. |
| 74 | S&F PVC bend any radius 75 mm bore complete all as specified and directed. |
| 75 | S&F PVC SWR floor trap with grating including jointing with solvent cement 75 mm dia. |
| 76 | S&F PVC SWR P- trap with grating including jointing with solvent cement 110 mm dia. |
| 77 | S&F in repairs vitreous china squating pan, \"Orissa\" pattern, size 580x440 mm white, with integral foot rests, including 100mm cast iron \"P\" or \"S\" trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed. |
| 78 | S & F in repairs 600 x 450 mm size beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed with wooden plugs with chromium plated brass screws and cup washers all as specified and directed by Engineer - in - Charge . |
| 79 | S & F in repairs stainless steel sinks with drainage board made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, fixed in repairs, complete all as specified. |
| 80 | Dismantling water tanks of capacity exceeding 250 and not exceeding 500 ltrs all as specified and directed by Engineer - in - Charge. |
| 81 | S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed by Engineer - in - Charge . |
| 82 | M&Lball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe supplied and fixed in repairs complete all as specified and as directed by Engineer-in-charge. |
| 83 | S & F in repairs 10 litres capacity, PVC valve less, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed. |
| 84 | S & Fin repairs PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engineer - in – Charge. |
| 85 | S & F in repairs bib taps, long body cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified. |
| 86 | S&F in repairs Fancytype single leaver wall mixer with provision of hand shower, but without hand shower cat No DRC-37119 make Jaquar or equivalent out of makes spd in list of makes of any colour, 15mm chromium plated screwed down for iron pipes or brass ferrule complete all as specified and as directed. |
| 87 | S&F in repairs fancy type CP pillar tap single leaver basin mixer without popup waste system with 450 mm long braided hoses cat No DRC-37011B make Jaquar or equivalent out of makes spd in list of makes of any colour for basin 15 mm dia screwed down high pressure with long screwed shank sand fly nuts screwed for iron pipe fixed as in repairs complete all as specified and as directed. |
| 88 | S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified. |
| 89 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and remove the debris outside from MOD land. |
| 90 | M&L for PCC (1:5:10) type E-2 using 40 mm graded brick aggregate as in sunken portioncomplete all as specified and as directed |
| 91 | Material and labour 15 mm thickscreed bedin CM (1:4) mixed with WPC as per manufacturer’s instructions @ 150 ml by per bag of cementon concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 92 | M&L for polythene film black 50 micron laid in floor, vertical surface etc complete all as specified and as directed. |
| 93 | M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat overplaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and as directed |
| 94 | S&F in repair 32mm diagalvanised iron spoutlightgradeforsunkenportion completeallspecified and as directed. |
| 95 | Demolition of stone slabs andtiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar. |
| 96 | M&L for 18-20 mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry @ 3Kg/Sqm, laid over and including 20mm thick cement and sand mortar (1:6) screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishinging damaged stone slab of any description complete all as specified |
| 97 | M&L for machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set in neat grey cement slurry @ 3Kg/Sqm, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 98 | M&L for Z-Black granite stone slab of sizes as directed(of any type) 20 mm thick on cooking platform,shelves etcmachine cut,bedded over 20 mm thick in CM1:4and jointed with grey cement slurry and pointed with white cement with admitures of pigment to match with shade of granite stone incl grinding and polishing compelte all as specified. |
| 99 | M&L providing edge moulding to 18-20mm thick marble stone of counters vanities etc including machine polishing to edge to give high gloss finish etc completed all as specified |
| 100 | Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed |
| 101 | M&L Brick work with sub class \"B\" Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge . |
| 102 | Taking down of old /unserviceable kitchen cabinet / Cupboard incl all fixture and fittings. For measurement superficial area in elevation will be measure complete all as specified and as directed. |
| 103 | S&F mild steel Godrej pattern cupboard with back, sides, top, bottom, 02 shelves , 01 vertical partition & mild steel shutter two leaves with frame , incl necessary fittings of 18 gauge MS sheet with locking arrangement and handle etc all as per Godrej pattern with duplicate keys including necessary fittings & 19mm stainless steel rod for hanging cloths & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The frame of cupboard to be fixed to wall with 6 Nos fastners.The cost of fastners & grouting themis deemed to be included in unit rates complete all as specified and as directed.Note:- Superficial area shall be measured, Approx Size (1150x1920x600mm) . |
| 104 | S& F in Repairs Stainless steel Kitchen Plate Rack of size 775mm x 750mm x 250mmof 1 mm thick stainless steel sheet with all internal fittings, and fixed to wall by means of rawl plug steel screws including washercomplete all as specified and directed by Engr-in-Charge.all as specified. |
| 105 | Supply & Fixing of 18 mm thick Rajshri WPC celluka ply of plain colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets as per specifications complete all as specified and as directed.Make :- Rajshri or equivalent as mentioned in list of makes. |
| 106 | Supply & Fixing of 18 mm thick Rajshri WPC celluka ply of one side Prelam/Rigidlam and other side balancing laminate colour to make kitchen cabinet shutter/ drawer front shutters as per specifications complete all as specified and as directed.Make :- Rajshri or equivalent as mentioned in list of makes. |
| 107 | Supply & Fixing of 12 mm thick Rajshri WPC celluka ply of plain white colour fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides as per specifications complete all as specified and as directed.Make :- Rajshri or equivalent as mentioned in list of makes. |
| 108 | Supply & Fixing of 6 mm thick Rajshri WPC celluka ply of plain white colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides as per specifications complete all as specified and as directed.Make :- Rajshri or equivalent as mentioned in list of makes. |
| 109 | Supply & Fixing for 20 mm wide & 1 mm thick PVC edge bending of PVC pasted on edges with suitable adhesive complete all as specified and as directed. |
| 110 | Supply & Fixing of auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and as directed. |
| 111 | Supply & Fixing of Ball bearing runners 45 mm telescopic channel (20 inch) full extension load capacity 50 kgs complete all as specified and as directed. (Make: Hettich,Ebco,Prime) |
| 112 | Supply & Fixing of stainless steel handles 100 mm size for kitchen cabinet/cupboard shutters complete all as specified and as directed.(Make: Hettich,Ebco,Prime) |
| 113 | M &L forABS body magnetic latches of size 50mm complete all as specified and as directed |
| 114 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/disintegrated rock etc Complete all as specified and directed. |
| 115 | M&L for 75 mm thick cement concrete type D-2 1:4:8with )using 40 mm graded stone aggregates) asin sub base of flooring etc Complete all as specified and directed. |
| 116 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved, design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand etc Complete all as specified and directed |
| 117 | M&L for cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) as in coping benching, gola, slightly rounded and similar items complete all as specified and as directed. |
| 118 | Removing excavated material to distance not exc50 metre and depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge |
| 119 | Excavation in post holes (or similar holes) in soft/disintegrated rock each n. exc 0.5cum, getting out, returning filling in and ramming earth or brocken rubble mixed with earth arround in layers not exc 25cm watering and removing surplus soil to a distance n. exc 50m and making good surfaces etc Complete all as specified and directed |
| 120 | M&L for cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) as in foundations, filling and mass concrete etc Complete all as specified and directed |
| 121 | Mild steel angle iron conforming to FE-290 Gde E-165 as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all drilling, bolting or rivetting etc. and similar works and embedding in concrete and screwing etc Complete all as specified and directed |
| 122 | S&F 11 to 15 mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other end,or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length exc 5 cm and n exc 10 cm long etc Complete all as specified and directed |
| 123 | Mild Steel round bar 10 dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for Gd.I, Fe-432 (Part I) etc Complete all as specified and directed |
| 124 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc Complete all as specified and directed |
| 125 | Supplying only Chain link MS galvanisd fencing, any size or type (weight not exc 4 kg/sqm) etc Complete all as specified and directed |
| 126 | S & F for Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, Thickness of sheet in 1.25 mm, etc Complete all as specified and directed |
| 127 | Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody for reuse or taking in schedule of credit and making good disturbed surfaces of walls, floors etc complete all as specified as directed. |
| 128 | Taking down existing ceiling fan of any size in position and re-fixing the same after b&R works including painting of the same with synthetic enemal paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and writting MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/ connector Complete all as specified and directed |
| 129 | Taking down existing Geyser 25 ltr in position and re-fixing the same after B&R work including painting of the same with synthetic enemal paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and writting MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from Metal clad to Geyser Complete all as specified and directed |
| 130 | Taking down existing single / three phase energy meter of any capacity after disconnecting all necessary electricals connections and re-fixing the same in Extg LT indoor panel complete all as specified and directed. |
| 131 | Taking down carefully existing ceiling fan / Exhaust fan of any size sealing cable end dismentling blades and removing fan and blade and kept aside and deposited to MES Yard complete all as specified and directed. |
| 132 | Taking down carefully copper/aluminium unserviceable sub main wiring of any type/Size from surface/ concealed/ existing conduits of any height and removing materials at site and making good disturbed surface of walls, floors, roofs etc complete all as specified and directed. |
| 133 | Taking down unserviceable Distribution Board /AC\"s box incl old u/s MCB/MCCBby disconnection of electric connection carefully SPN DBs/TPN DBs/Main switch including making good to disturbed surface to deposit in store for keeping in safe custody for reuse or taking in schedule of credit of any Size/rating complete all as specified and directed by Engr-in-charge. |
| 134 | M&L for point wiring using approved colour coading as per IS with two runs of FRLS PVC insulated unsheathed, 1100 V grade, IS marked, cable multi stranded copper conductor of Size 1.5 sqmm (nominal area) drawn through in and including concealedPVC conduit Size of not less than 20mm concecled in wall / surface including provn of 1.2 mm thick pressed steel terminal box of suitable Size, 60 mm deep with earth dolly duly covered with modular white cover plate with inner frame wuitable for modular switches as required module for mounting switch, socket and fan regulator along with IS marked, FRLS grade, earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of Size 1.5 sqmm and making good, disturb surface to match with existing finish with plaster as it is, complete all asspecified and directed for the following.Note :- Colour coding of cable should be Phase- Red, Neutral- Black and Earth- Green |
| 135 | One light pointcontrolled by one,one wayswitch. |
| 136 | One ceiling fan/exhaust fan/Air ciculator controlled by one way switch. |
| 137 | One Socket 3 pin 5 Amps on the same board, complete all as specified. |
| 138 | One Socket 3 pin 5 Amps on independent board , complete all as specified and directed. |
| 139 | One bell/buzzer point controlled by one push button on the independent board with cables |
| 140 | One light point controlled by two 2 way switch |
| 141 | Complete all as per Item No 134 herein before but with 2.50 Sqmm cable for switch socket outlet 3/5 pin 15 AMp with 2.50 Sqmm as earth dolly continuity conductor complete all asspecified and directed (for 15 Amp socket point) |
| 142 | Complete all as per Item No 134herein before but with 4.0 Sqmm cable for switch socket outlet 3/5 pin 15 AMp with 4.0 Sqmm as earth dolly continuity conductor complete all asspecified and directed (for Geyser/ AC point) |
| 143 | S&F of Modular switch one way, 6 Amp, single pole, 240 V, AC, ISI marked complete all as specified and directed |
| 144 | S&F of Modular switch two way, 6 Amp, single pole, 240 V, AC, ISI marked complete all as specified and directed |
| 145 | S&F of ceiling rose surface bakelite three terminals 62/25 mm dia complete all as specified and directed |
| 146 | S&F of modular switch flush type, 16 Amp, single pole, 230 V, AC, ISI marked, one way complete all as specified and directed |
| 147 | S&F of modular socket outlet, 2 in 1, 3 pin, 6 Amp, flush type, 230V,ISI marked complete all as specified and directed |
| 148 | S&F of modular socket outlet, 2 in 1, 3 pin, 6/16 Amp, flush type, 230V, ISI marked complete all as specified and directed |
| 149 | S&F of call bell multi music type, AC 230 Volts, single pole complete all as specified and directed |
| 150 | S&F of Modular bell push flush type 6 Amp single pole IS marked complete all as specified and directed |
| 151 | S&F for highly efficient LED Bulbs, 10 watt in B-22 cap complete all as specified and directed. |
| 152 | Supply and fixing in replacement Inverter LED batten with squre profile 20 Watt and polycarbonate channel . Lithium lon battery with bcharging time 8 hourse -10 hourse and back up time upto 4 hours.with extrudedenvironmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connectedaccessories all as specified and directed. Make :Havells LHEXACP7FN1W020 or equivalent of approved makes |
| 153 | S & F in replacement for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of one years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.Make :- Bajaj Make Cat part No BCLAB 20 W, Wipro Make Cat part NoLL20-281-XXX065-ALIor equivalentin approved makes |
| 154 | Supply and fixing in replacement lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 155 | Supply and fixing in replacement LED tube light fitting mirror type with high output diffuser 2 feet, 10 watts 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 156 | S & F for Decorativewall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 7 W LED lamp B22baseand including fixingof LED bulb 7 watts complete all as specified and as directed. Make Havells Cat No LHFOAJE1TZ1I060 or its equivalent makes in approved makes |
| 157 | S & F LED light fitting 1 x 9 W/ 1 x 10 W bulkhead luminaired including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 158 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep.Min air delivery 210 CFM with service value 6.00 BEE.Five star rated with brushless direct current motor (BLDC) complete all as specified and directed |
| 159 | Supply and fixing modular stepped type electronic fan regulator flush type complete all as specified and directed |
| 160 | Supply and fixin replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed. |
| 161 | S & F for sheet metal enclosure MCBDBSPN12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 162 | Supply and fixing240V 10KA \"B\" SP 6 to 32Amps curve miniature circuit breake (MCB)and current carrying capacity in the DB complete with connection testing and commissioning complete all as speciifed and directed. |
| 163 | Supply and fix heavy duty single phase, steel body exhaust fan 300 mm sweep, 900 RPM complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastener as approved by Engr-in-charge complete all as specified and directed. |
| 164 | Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 250/200 mm sweep with louver ,white in colour includingcutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. Make: Havells Model Ventil Air-DX White or equivalent in approved makes |
| 165 | S&Fsub main wiring for circuit of size 6 sq mm 2 core (FRLS grade) alongwith earth wire of 6 sq mm single core of FRLS grade PVC insulated, unsheathed cable,1100 volts grade with multistranded copper conductor including PVC conduit (concealed wiring) of suitable size not less than 25 mm complete all as specified and directed by Engr-in-Charge. (FOR SPN DB\"s & energy meter) |
| 166 | Supply and fixing in replacement LED bldg security light fitting 35 watts 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including suitable size of GI bracket for mounting of security light to be bend as required shape, pipe bracket shall be made as per direction and site requirement and suitable size 02 Nos MS clamps and nuts and bolts. |
| 167 | S & F for Modular type TV Socket out let complete all as specified and as directed. |
| 168 | S & F for Modular type RJ 45 socket outletcomplete all as specified and direced. |
| 169 | S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for telephone and TV connectionsincludingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed. |
| 170 | Supply and fix and testing for anti suicide fan rod 12 inch if the load on fan exceeds 22 kg , than the smartm rod / piece opens from its centere and spring in the pipe expands. Thus any one trying to hang from fan comes down safely complete all as specified and directed. |
| 171 | Supply and laying and testing cable XLPE insulated, screned, PVC bedded galvanized steel strip or wire amoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core (for each block incomer cable) |
| 172 | M & L for scrapping the old painted surfaces and spray painting of LT panel board of size upto 1.4 m x 1.2m x 0.6 m with two coats of synthetic enamelled paint of approved colour complete with all fittings etc all as specified and directed by Engineer-in-charge.(Note : 1. Rate quoted by the contractor deemed to be included the writing of outgoing and incoming feeder etc. |
| 173 | S & F MCB SPN 40 Amps (for replacement in Existing LT panel/Meter panel) |
| 174 | Excavation in trenches in hard/dense soil not exc. 1.5 metre wide and n\"exc. 1.50m deep for laying cables/pipes/poles and getting outcomplete all as specified and directed. |
| 175 | Returning filling including spreading leveling watering and well ramming in layers not exc 25Cmin soft/ loose soil, complete all as specified and directed. |
| 176 | M&L for sand cushning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches including watering and consolidation, complete all as specified and directed. Note :- Thickness after punnign (18cm) shall be considered for payment/ |
| 177 | Supply and lay well burnt brick class B of size 250 x 110 x 75 mm as protection to cable in cable trenches all as specified and directed |
| 178 | Taking down old u/s LT UG cable of size 35 sq mm 3.5 core complete all as specified and directed. |
| 179 | M&L for earthing to LT panel board/TPN DB with mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0 mm diaby means of galvanised iron nuts, bolts and washer, earth lead connected to eqpt as directed, earth plate surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the plate including necessary earth work, PCC chamber and reinforced PCC cover made by PCC 1:3:6 type C-1 as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B-1 duly reinforced with 6mm dia MS bar at 150mm c/c both ways with 10 mm dia MS round bar as handle, 20 mm bore GI pipe medium grade for watering and 15 mm dia GI pipe light grade for protection of earth lead up to 7.5 mtr with funnel, wire mesh etc with and including testing incl taking out old u/s existing earthing materials complete all as specified and as shown in electrical plate No 3 of MES sch Part I. |
| 180 | Net Contract Sum will be after deducting Sch of Credit of Rs 2,07,228.00 |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
