|
| 1 | Taking down cement plaster of any thickness from wall\"s/ceiling including raking out joints hacking for key scrubbing down with water and dispose off debries out side the premises where directed complete. |
| 2 | Material and labourfor rendering 12 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extracementcomplete all as specified and directed. |
| 3 | Material and labourfor rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 using WPC 3% by wt of cement finishing fair and even complete all as specified and directed |
| 4 | Material and labourfor rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3finishing even and smooth without using extracement complete all as specified and directed. |
| 5 | Material and labour for waterproofing to wet area ofwall uniformly comprises as under:-(i) Surface PreparationFirst,clean the surface to remove loose plaster or disturbed portion.Clean the brick joints properly and make sure the surface is neat and dust-free.(ii) Waterproofing CoatApply one coat of FOSROC NITOCOTE SN or equivalent of Asian Paint//Sika/Berger /Pidilite Dr Fixit by evenly spraying or brushing , before plastering/tiing all as specified and directed. |
| 6 | Supply only water proofing compound (ISI Marked) all as pecified and directed. |
| 7 | Material and labour for preparation of newly plastered surfaces of walland applying 02 coats of cement base paint complete all as specified & directed. |
| 8 | Material and Labour for preparation of newly plastered surface of wall and applyingtwo coats of oil bounddistemper over priming coat over 2 mm thick wall care putty to make surfaceuniform and smooth complete all as specified. |
| 9 | Material and Labour for preparation of new plastered surfaces and applying three coats of white washon ceiling complete all as specified. |
| 10 | Material and labour in repairs water proofing treatment to RCC in-accessible roofs complete all as specified and directed comprises as under :(a) Remove existing water proofing treatment if any,sweeping clean and washing down with water to remove dust .While doing the treatment on existing roof , concrete surfaceshould be throroughly inspected for any significant distress.Such distress ,if any repaired /rehabilitated and treated. (b) Providing and laying /fixing TPO (Thermoplastic Polylefin) water proofing membrane on prepared surface of roof & upto 300 mm parapets and crumple joint including junction of roof and parapet with the following method :-Method:Cleaning the surface and laying FOSROC Proofex ORG (Minimum 1.2mm thick for in-accessible roof) over a min 200 GSM Geo Textile or Asian Paints TPO or equivalent product of M/s MC Bauchemie /CIPY/SIKA/Pidilite Dr. Fixit/Berger TPO membrane ,applied as per manufacturer\"s instructions.( c) The work shall be carried out complete all as per manufacturer\"s specifications and application methodiology.Execution to be done with authirized trained /skilled applicators of manufacturer as per the technical guidelines laid by manufacturer.Company back guarantee to be given by contractor after completion of water proofing work before payment. |
| 11 | Dismantling of brick tiles single layers on roof, jointed and grouted / pointed in cement mortar including cleaning serviceable tiles and stacking properly for re-use, disposal of unserviceable tiles and debris /rubbish from site complete all as specified. |
| 12 | Demoliton of mud in roof any thickness including mud plasteringand removingdebries of the premises where directed complete. |
| 13 | Material and labourPCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs, sloping paddingand finishing the surface even and smooth(without using extra cement) completeall as specified. |
| 14 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 [email protected] Kg/Sqm includingcleaning surfaces etc complete all as specified |
| 15 | Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portionwith overlapping 100mm to eiher side completeall specified. |
| 16 | Material and labour for 40 mm thick brick tiles laid over andincluding 15mm thick bedding layer in cement mortar 1:6 andjointed, grouted and flush pointing as work proceed in CM 1:3 complete all as specified. |
| 17 | All as per Srl item 16 above here-in-before but except tiles.Note : (i)Serviceable brick tiles obtained fromshall be reused. |
| 18 | Demolition of brick work built in cement mortar, seperation, cleaning and stacking of serviceable bricks for reuse and removal of debries out side the premises where directed complete. |
| 19 | Material and labourfor brick work with sub Class \"B\" old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6 complete all as specified. |
| 20 | All as per above item 19 above item but except brick using old serviceable bricks obtained from demolition |
| 21 | Supply & fixing in reapir 15mm bib tap standard of PTMT any colour fancy type long body high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 105 gms) etc complete all as specified and directed. |
| 22 | Supply & fixing in reapir 15mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 90 gms) complete all as specifeid and directed. |
| 23 | Supply & fixing in repair 100mm swivel type shower rose of PTMT with shower arm15 mm size, 195 mm long ofany colour for fixing with 15 mm pipe ( min weight 40 gms )complete all as specified and directed. |
| 24 | Supply and fixing in repair 15mm Pillar taps,of PTMT any colour fancy type high pressure scewed for iron pipe complete all as specifeid |
| 25 | Supply and fixing in repairs bevelled edge mirror ofsize 600mmx450mm , 6mm thick of selected quality glass, mounted on 6mm thickcommercial plywood including teak wood beading allround and fixed to wooden plug with chromium plated brass screw and cup washer and including clamps with wooden / plastic frame complete all as specified |
| 26 | Supply & fixing in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified |
| 27 | Supplying and fixing in reapir whitePVC valve less syphonic action type low level flushing cistern of 10 ltrs capacity with inlet ball valve, float valve, push button type handle includingpipe 32mm dia of PVC(Heavy duty) flush pipeincluding brackets andtaking down/dismantling old unserviceable cistern completeall as specified. |
| 28 | Supply and fixing in repair vitreous china wash basin, white, flat back of size 550mm x 400mm fixed on existing brackets, including32mm bore CP waste coupling, PVC waste pipe, inlet & outlet, chrimium plated PVC pipe etc, complete all as specified and directed. |
| 29 | Supply & fixing in replacement vitreous China squatting pan \"Orissa\" pattern of size 580mm x 440mm white with integral foot rests including lime concrete for fixing the trap and making connection to trap and flush pipe and making good the floor to existing specifications completeall as specified and directed. |
| 30 | Supply & fixing in repair replacement vitreous china wash down water closet pan (pedestal pattern) white with trapincluding connection to existing out joint pipe, flushing pipe or cistern, antisyphonage pipe, includingplastic water closet seat white closed pattern with flat botom and cover mild steel chromium plated or aluminium plated or aluminished hinging device complete all as specified and directed. |
| 31 | Supply & fixing in reapir soap dish fixed to walls with chromium plated brass screws complete all as specified. |
| 32 | Supply and fixingin repair PVC connection 450mm long of 15mm size with PTMT nutson both sides complete all as specified. |
| 33 | Dismantaling floor hearth or wall tiling incl cement mortar bedding or plaster upto the thickness of 15 mm complete removing rubbish off the premises complete as specified. |
| 34 | Material and labourNon skid cerermic coloured tiles 7 to 8 mm thick (Square /rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm, set and jointed in neatcement slurry and pointed in white or coloured cementwith pigment to match over 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 35 | Material and labour Glazed ceramic coloured tiles in vertical surface 350x 450X 300X 7mm thick setandjointedinneat cement slurry and pointed in white or colour cement to match such skriting /dado and over 10mm thick in cement mortar 1:4 as in backing plaster complete all as specified and directed. |
| 36 | Taking up or down steel water tubing and connectionsincluding cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm complete all as specified.Note :- The quoted rates shall be include for necessary excavation andearth work, cutting/ chasing in wall/ floor and making good in CM1:3 all as directed. |
| 37 | All as per above item 36 here-in-before but 20 mm bore. |
| 38 | Supply & fixing15mm boretubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floorscomplete all as specified. |
| 39 | Supply & fixing 20mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors complete |
| 40 | Supply & fixing rotational moulded polythelene water storage tanks(multi layer) capacity 500 litres(cylindrical vertical with closed top), with and including 20mm dia PTMT ballvalve with epoxy coated aluminium rod ( minium weight 210gms ) hoisted, fixed in position and making connection with inlet & outlet tank nipple with gate valveincluding dismantling of existing unserviceable tank exc 250 Ltr & not exc 500 Ltr complete all as specified. |
| 41 | Disconnecting existing tanks of cap exc 250 ltrs & n.exc 500 Ltrs, setting aside (or lower ing if required) for repairs, cleaning, etc. and hoisting if required re- connecting and re-fixing in position and Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes,including inlet & outlet tank nipples and inlet and outlet gate valave etc complete all as specified and directed. |
| 42 | Supply & fixing in reapir PVC covers of water storage tank (Capacity of tank n.exc 500 Ltr) area not exceeding 0.5 sqm each including hing and fixing nut bolt arrangement complete all as specified and directed. |
| 43 | Supply & fixing in repair 15 mm Ballvalveshigh pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for ironpipe and fixed.(Minimum weight 15mm-142gms) |
| 44 | Supply & fixing in repair 20 mm Ballvalveshigh pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for ironpipe and fixed.(Minimum weight 2 0mm-210gms) |
| 45 | Dismantling ofPVC pipeof 75/100mm dia fixed with cement joint complete all as spec ified. |
| 46 | Material and labour75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete. |
| 47 | Supply & fixing PVC (SWR) 110mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete. |
| 48 | Supply and fixing PVC (SWR) 110mm dia mtr bends any radius complete. |
| 49 | Supply and fixing PVC (SWR) 100mm junction single,(Single T) equal or unequal |
| 50 | Supply and fixing PVC (SWR) 100mm junction double, (double T) equal or unequal |
| 51 | Supply and fixing PVC (SWR) 75mm junction single,(Single T) equal or unequal |
| 52 | Supply & fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 53 | Material and labourPVC (SWR) gully trap 125/110mm setting and jointing with solvent cement. |
| 54 | Taking down shutter and removing from site of any description size but not exc 1 sqm complete all as specified and directed. |
| 55 | Taking down chowkhats or frame without taking of shutter and removing from site n.exc 1.5sqm each complete all as specified and directed. |
| 56 | Taking down shutter exc.1 sqm and not exc 4 sqm each and refixing same opening complete. |
| 57 | Supply & fixing solid PVC door frame of size 50mmx47mm made out of 5mm plain glover PVC sheet reinforced with MS square tube in opening as per specification. |
| 58 | Supply & fixing factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC \"C\" channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification. |
| 59 | Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mmouterframe ( single rebated), comprisesglazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing ofsheet glassincluding fixture and fittingslike as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. NOTE : , Guard bar, Sheet glass and painting shall be measured and paid Separately. |
| 60 | Supply & fixing framed work such as grill, framed guard bar and similer work conforming to FE 290, GDE E- 165 all as specified and as directed. |
| 61 | Supplying and fixingstainless steelwire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified. |
| 62 | Supplying and fixing in repair stainless steelwire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified. |
| 63 | Hacking out old broken glass any thickness, size, quality or description from steel frames with oil glazing pin, glazed with putty or fixed with beads Complete all as specified |
| 64 | Supply & fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed on steel frame, in squares not exc 0.50 Sqm in each panes complete all as specified. |
| 65 | Supply and fixing 3mm thick figured glass pin head type and glazing with oil putty or fixed on steel frame, in squares not exc 0.50 Sqm in each panes complete all as specified. |
| 66 | Supply & fixing butt hinges 100mm size medium weight cold rolled mild steel fixed with stainless steel screw complete all as specified and directed |
| 67 | Supply & fixing 150 mm size aluminium anodized barrel tower boltof extruded section fixed with stainless steel screw complete all as specified. |
| 68 | Supply & fixing in reapir 150 mm size aluminium anodized barrel tower boltof extruded section fixed with stainless steel screw complete all as specified. |
| 69 | Supply & fixing 125 mm size extruded aluminium anodized handle cast type fixed with stainless steel screw complete all as specified. |
| 70 | Supply & fixingin repairs125 mm size extruded aluminium anodized handle cast type fixed with stainless steel screw complete all as specified. |
| 71 | Material and labourfor preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier. |
| 72 | All as per above item 71here-in-before but single coat on old steelsurfaces incl preparation complete as specified. |
| 73 | Demolition of cement concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level) all as directed |
| 74 | Material and labourcement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate) , 50 mm thickas in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair ontop without using extra cement complete all as specified and directed. |
| 75 | Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish debries out side the premises where directed complete. |
| 76 | Material and labour for water proofing treatment to existing sunken floors/ slab of kitchen, toilets, laboratories, bath and WCs etc comprisis as under:-(a) Remove all the existing sunken treatment and clean the sunken/lowered portion of RCC slab surface for full depth of sunken floor by wire brush .Chisel out any mortar sticking the surface .(b) All pipes passing through walls of sunken floors shall be laid before water proofing treament is carried out.One No. 50 mm dia , 35 cm long medium grade GI pipe with wire gauge on inside mouth shall be provided to each sunken portion.(C) Applying FOSROC Nitroproof 600 PF (Minimum 0.8 mm dft) over a priming coat of Nitroproof WB Primer or equivalent product of Asian Paints ,M/s MC Bauchemie /CIPY/ SIKA/Pidilite Dr Fixit/Thermax/STP/Berger applied as per manufacturer\"s instructions to bottom and full verticle sides of sunken floors.(d) Fill it with water and check for dampness and seepage . In case the slightest indications of seepage/leakage is noticed , the same shall be rectified by injection grouting to seal all cracks or application of Polymer modified mortar of FOSROC Nitobond SBR or equivalent of M/s MC Bauchemie / CIPY / SIKA / Pidilite Dr. Fixit / Asian paints / Thermax / STP/ Berger admixed with integral WPC or cementitious crystalline waterproofing compound in the affected area to seal all cracks and micro cracks if any, and this shall be done by contractor at his own cost.(e) Apply additional coat of FOSROC Nitoproof 600 PF or equivalent of Asian paints/M/s MC Bauchemie /CIPY/SIKA/Pidilite Dr Fixit /Thermax /STP / Berger (f) All junction points of side wall where CI/GI pipes are passing through shall be sealed with epoxy cement martar.(g) A protection plaster (12-15mm thick) in cement mortar (1:3) admixed with appropriate integral water proofing compound has to be a applied on the walls.(h) All traps in sunken slabs to be enclosed with PCC (1:1½:3) (min 15cm) alround.(j) The sunken portion shall be filled with PCC (1:5:10) using 40mm graded stone aggregate all as specified.(k) Providing 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as sin flooring for laying floor finishes all as specified. Notes :-Plan area (wall to wall/ wall to beam/ beam to beam) shall be measured and paid. No separate measurement for vertical surface shall be accounted and quoted rate shall be deemed to include for the same. |
| 77 | Material and labourfor preperation ofOLD decorated surfaces of walls by scraping and washing down with, removing all acales/dirts and greasy spots andapplying one coat of oil bound distemper over and including applying plaster of paris putty as required to prepare the surface even and smooth complete all as spcified and directed by Engr in Charge . |
| 78 | Material and labourfor applying one coat of whitewash on ceiling including preperation of OLD plastered surfaces complete all as specified and directed. |
| 79 | Material and labourPreparing of OLD decorated brick/concrete plastered/un-plastered surfaces including scrapping of old existing treatment of walls pillars cornices applying one coat of cement base paint complete all as specified and directed. |
| 80 | Material & Labour for applying two coats of weather proof exterior garde emulsio over priming coat including preparation of newly plaster surface complete ae per manufecturer instructions all as specified and directed. |
| 81 | Supply & Fixing Bib taps, cast copper alloy fancy type, chromium plated, with long shank long bodyfor sink with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15mm bore ; Complete all as specified and directed. |
| 82 | Supply and fixing 15mm bore anglecock cast copper alloy CP screweddown high pressure with crutch or butterfly handle complete. |
| 83 | Supply & fixing in repair stop valve (Concealed cock) 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc. complete all as specified. |
| 84 | Material and labour for water proofing treatment to efflorescenceeffected area of walls complete all as specified and directed comprises as under :-(i) Clean the surface to remove loose particles or any efflorescence on bricks.(ii) Application of Silane Siloxane based water repellent coating FOSROC NNITOCOTE SN 522 (or equivalent of SIKA/Berger/Asian Paints/Pdilite Dr Fixit ) by evenly spraying or brushing (coverage approx 7 sqm per ltr of NITOCOTE SN 522) ,before plastering/tiling etc complete as per manufacturer\"s instructions .Note :- Plastering including taking down shall be measured and paid for seperately. |
| 85 | Material and labour for water prrofing treatment to Chajjas complete all as specified and directed as under:-(Coving or any extra plaster (over external plaster ) over chajja not to be provided.(b) The designated area i.e. over chajja and over the wall above chajja for a height of 900 mm and upto 600 mm on either side of chajja width shall be moist by sprinkling water .( c) Apply FOSROC Brushband Roofguard minimum 3 layers or euivalent product of Asian paints/MC Bauchemre /CIPY/SIKA/Pidilite Dr Fixit /Tarmax/STP/Berger as per manufacturer instructions.Make :- Fosroc,Sika,Choksay,Bostik,STP,I can Nano,Asian Paints ,Berger,Dr Fixit |
