|
| 1 | Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested : |
| 2 | Beyond 6 m and up to 12 m depth |
| 3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints completeas per direction of Engineer in Charge. |
| 4 | 25 mm nominal dia Pipes |
| 5 | 20 mm nominal dia Pipes |
| 6 | 50 mm nominal dia Pipes |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 8 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 9 | 12 mm cement plaster of mix : |
| 10 | 1:4 (1 cement: 4 coarse sand) |
| 11 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 12 | Fixed to openings /wooden frames with rawl plugs screws etc.(55.12 square bar + 60.80 flat bar) |
| 13 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheetscomplete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cuttingto size and shape wherever required. |
| 14 | 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 15 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 16 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 17 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 18 | Check Valve |
| 19 | Ball Valve |
| 20 | Electrical Works |
| 21 | Wiring for circuit/submain line alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface recessed medium class PVC conduit as required. |
| 22 | 2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire |
| 23 | Supplying and fixing metal box of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. |
| 24 | 200 x 150 x 60 mm |
| 25 | Supply, fitting and fixing of 15/16 A Switch |
| 26 | Supply and fixing of 5A to 32A rating, 240/415V, 10KA \"C\" Curve, MCB suitable for inductive load of following poles in the existing box complete with connection, testing and commossioning etc. as required. |
| 27 | Single Pole |
| 28 | Supply and Installation of self priming regenerative pump, 1.5 HP pump |
| 29 | 1 way MCB Box |
