Name of Work: Interior Refurbishment of Studio Room, Admission Cell, TISS, Main Campus, Mumbai
Sl. No.
Item Description
1
Interior Refurbishment of Studio Room, Admission Cell, TISS, Main Campus, Mumbai
2
WORKSTATION of required size and shape (as per attached drawing) with fixed 3 drawer Pedestal/ Wire Manager/ side frosted glass Partition and 8 model Electrical Socket, data point, and telephone point at each workstation, including all connections and activation of telephone, electric, and internet lines. All made in 19mm BWP ply (1mm thick Laminate on outside and polishing at internal sides). (Top surface area shall be consideredfor measurement) Vendor shall use the switches, sockets, electrical cables, Cat 6 cables, etc., of a reputed brand only.
3
Filing unit or floor filing unit of required design, Size, and shape, accessories all made in 19mm BWP Ply with 1mm laminate of approved designfrom outside and polishing from internal side . Depth of the filling unit shall be uo to20 inches. The design of shelves,drawers, locks, handles, fittings etc. shall be as per the directions of Engineer In-charge.
4
Conference Table of desired size and shape in 19mm ply with veneer of desired pattern and malamine polish and 32mm thick border with desired leg design for floor support Conference table
5
Providing and fixing aluminium partition with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.Work also includesProviding and fixing glazing with float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) in aluminiumpartitionwith EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . Glass shall be pasted with the film of desired pattern with required logo and letters/ writeup.
6
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge Glass shall be pasted with the film of desired pattern with required logo and letters/ writeup.
7
Supply and installation 2.5 mm circuit wire for electric supply
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
