|
| 1 | Providing and Laying Interlocking Pathways including Earthworks excavation, P.C.C 1:3:6 (1 Cement:3 C.Sand: 6 Graded stone aggregate 40mm nominal size), Kerb Stone with M-25 cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), factory made chamfered edge Cement Concrete 80mm thick cement concrete paver block of M-30 grade with approved colour, design & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including cost of all material,labour and T&P etc. required for proper completion of work as per direction of Engineer-in-Charge |
| 2 | Providing and laying CC road including Earthworks excavation, P.C.C 1:3:6 (1 Cement:3 C.Sand: 6 Graded stone aggregate 40mm nominal size)in foundation , Class M-150 brick work in 1:4 (cement: coarse sand), Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade,Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site,With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25, cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge i/c Item of joint fillers, sealants, dowel bars, including cost of all material,labour, lead (50 metre) and lift and T&P etc. required for proper completion of work as per direction of Engineer-in-Charge. |
| 3 | Supplying and fixing of 16mtr high mast shaft of apporved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3mm. Top dia minium 150mm bottom dia 360mm base plate 32mm thick suitable for wind velocity as pe IS 875 part 3& having no circumferential weld with accesories for high mast suh as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5HP power tool moter 3point suspension system with steel wire rope 6 mm dia double drum winch including making suitable foundation as per manufacture drawing/ site reiment along with foundation bolt nuts wahers anchors plates etc complee in all respect. |
| 4 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. |
| 5 | Supply and Fixing 6 Sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable complete in all respect. as directed at site by Engineer in charge |
| 6 | Supply and Fixing 1.5 Sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable complete in all respect. as directed at site by Engineer in charge |
| 7 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect.10 sq. mm 3-1/2 core |
| 8 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect .40 A TPN |
| 9 | Supply and burring of Safe Earthing Electrode T-39 (Hot Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 10 | supply and fixing of twin unit aviation obstruction light (GEC-ZH 752) / Bajaj BJAOL-2 with red glass, B.C. holders etc. complete in all respect, at the top of the building complete in all respect |
| 11 | Supply and fixing of brass nickel plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer Incharge. for size 10 sq. mm 3-1/2 core |
| 12 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect. 10 sq.mm |
| 13 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 14 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, byspreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 15 | Supplying and stacking of good earth at site including royalty and carriage upto 15 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 16 | Supplying and stacking at site dump manure from approved source including carriage upto 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm. |
| 17 | Carrigae of manure upto 5 K.M. |
| 18 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge. |
| 19 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately |
| 20 | Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). |
| 21 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 22 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) |
| 23 | Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35- 40 cm well developed in big size HDPE bags as per direction of the officer-in-charge. |
| 24 | Cyprus Golden Conical Shape 150 to 165 cm ht. plant, with fresh and healthy Golden colour foliage in 35cm Cement Pot |
| 25 | Plumeria alba Willow Tree height 165-180 cm. with 2-3 branches in bag size 30 cm |
| 26 | Mangifera indicia (Mango-grafted ) height 60-75 cm. in big poly bag size 25 cm |
| 27 | Providing and stacking of Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge. |
| 28 | Supply and fixing of fiber trash bins with iron stand with unique design (Approximate perimeter 2.40 metre) in landscaping area including cost of all material,labour and T&P etc. required for proper completion of work as per direction of Engineer-in-Charge |
| 29 | Supply and fixing Cast iron benches with back in unique design (Approximate size of 1.60 meter length, 0.5 meter width & 1meter height up to back top)for landscaping area including cost of all material,labour and T&P etc. required for proper completion of work as per direction of Engineer-in-Charge |
| 30 | Supply and Fixing Sign Board with S.S. Grade 304 pipe unique design (Approximate size upto 0.90x0.45 Sq meter) hollow tubes, channels,plates etc. including welding, grinding, buffing, polishing and making curvature (wherever requited) and fitting the same with necessary accessories & stainless steel dash fastners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. |
| 31 | Class M-150 brick work in 1:4 (cement: coarse sand) including cost of all material,labour and T&P etc. required for proper completion of work as per direction of Engineer-in-Charge |
| 32 | 12mm cement plaster of mix 1:4 (1 cement:4 Coarse sand) including cost of all material,labour and T&P etc. required for proper completion of work as per direction of Engineer-in-Charge |
| 33 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick including cost of all material,labour and T&P etc. required for proper completion of work as per direction of Engineer-in-Charge Please Enable Macros to View BoQ information |
