|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 3 | M&L for Sand filling under floors or in foundationincluding watering and consolidatedand compacted with clean dry sand complete all as specified and directed. |
| 4 | Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 5 | M&L for hardcore of gauge n.exc. 63 mm, with broken stone or boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed. |
| 6 | M&L for cement concrete1:4:8type D2,using 40mm graded crushed stone aggregate as in foundations filling and mass concrete complete all as specified and directed. |
| 7 | M&L for Providing precast ce- ment concrete type B1, 1:2:4 using 20mm graded crushed stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified and directed. |
| 8 | M&L for reinforced cement concrete design mix M 25 grade using 20 mm gradedcrushed stone aggregate asin foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 9 | M&L forreinforced cement concrete design mix M 25 grade using 20 mm graded crushed stone aggregate asinSlabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and directed. |
| 10 | M&L forreinforced cement concrete design mix M 25 grade using 20 mm graded crushed stone aggregate asin chajja , shelves and like etc.complete all as specified and directed. |
| 11 | M&L forreinforced cement concrete design mix M 25 grade using 20 mm graded crushed stone aggregate asin beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 12 | M&L forreinforced cement concrete design mix M 25 grade using 20 mm graded crushed stone aggregate asin Columns,pillars,piers,posts and struts complete all as specified and directed. |
| 13 | Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and directed. |
| 14 | M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 15 | M&L for brickwork with old size fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 16 | M&L well burnt old size sub Class ‘B’ bricks, laidin trenches for cable protection complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical to rough finished surface complete all as specified and directed. |
| 18 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) rough finished surface flat complete all as specified and directed. |
| 19 | M&L for formworkto chullah hoods, chajjas, troughs and similar items in cluding edgescomplete all as specified and directed. |
| 20 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 21 | M&L for formwork to sides of pillars, posts, struts, piers,columns and stanchions rough finished surfaces of concrete, square, rectangular or polygonal in shape complete all as specified and directed. |
| 22 | M&L for rough finished formworkto edges of concrete flats, treads, breaks in floors,window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar workn exc 20cm wide complete all as specified and directed. |
| 23 | S&F 35mm thick 2nd class hard wood glazed and skeleton factory made shutter open rebated and prepared to receive glass, gause etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.24(a), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 24 | S&F 35mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 25 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatm moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain/decorative colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement in the frame at site as per specification & drawing. etc complete all as specified and directed. |
| 26 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawingcomplete all as specified Note:-The door frame to be fixed to wall using 8 x 100 mm long anchor fasteners. |
| 27 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 28 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing.(Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)complete all as specified and directed. |
| 29 | M&L 18mm thick Pre laminated plain colour WPC sheet of density 650 kg/Cum for cabinet of wash hand basin, shelf partition wall etc incl necessary hinges, handles, legs, closer magnet fixing with adhesive/screws complete all as specified and directed |
| 30 | S&F 100mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 31 | S&F 100mm Extruded brass handles,fabricated type polished complete all as specified and directed. |
| 32 | S&F 75 mm Butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed. |
| 33 | S&F 200mm aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 34 | S&F 150mm aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 35 | S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) andfixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direcetd. |
| 36 | S&F 300 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) andfixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direcetd. |
| 37 | S&F 150mm size aluminium handle cast typecomplete all as specified and directed. |
| 38 | S&F aluminium (die Cast) Door closer hydraulically regulated,universal type,suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed. |
| 39 | M&L for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescomplete all as specified and directed. |
| 40 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as secified and as directed |
| 41 | M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge |
| 42 | S&F tubular towel rail 20mm dia D type brass chrormium plated 600mm long between flanges complete all as specified and directed. |
| 43 | S&F Soap dish, any type, brass chrominium plated fixed with chrominium plated brass screws complete all as specified and directed. |
| 44 | S&FDouble action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 45 | M&L for MS framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed. |
| 46 | M&L forTMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 47 | M&L forTMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 48 | M&L forTMT bars5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 49 | S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey, tower bolts etc. complete with glazing bars dovetailed or weldedcomplete all as specified and directed. |
| 50 | S&F steel window with side hunge shutters including box type hinges with steel handle and steel peg stey, tower bolts etc. complete with glazing bars dovetailed or weldedcomplete all as specified and directed. |
| 51 | M&L for 1.25mm thickpressed steel door frame of size 165mm x 60mm with one or more rebates including necessary , hinges, lock strike plate, fixing lugsetc complete as specified. |
| 52 | M&L forrolled sections as in main and cross beams, hip and jack rafters, purlins where connected to comman rafters and running railsfixed with angle cleats or other connecting plates conforming to Fe 410 W (Gde E-250) quality-A including welded to rafter,purlin complete all as specified and directed. |
| 53 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe -410-W(Gde-E-250) quality-A. complete all as specified and directed. |
| 54 | S&F Pre- painted coloured trapezoidal profiled Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding towall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed. |
| 55 | S&F Pre- painted coloured plain sheet Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding towall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP/ XRW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed. |
| 56 | M&L for providing and fixingDESIGNER PVC FALSE CEILING consisting of 600x600mm, 5mm (+0.25) thick plain ambossed PVC sheet of 600Kg/Cbm Density manufactured by ISO 9001-2008, certified company, used as panel insert in a frame work made using anodised aluminium T- section of sizes 1\"x1\" (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2\"x2\"(600x600mm). the aluminium frame work is supported from the ceiling with the help of \"J\" hook and GI wire/6mm MS rods of require sizes to maintain proper level etc. The aluminium framework is supported on side wall withthe use of aluminium L-section of size 1\"x1\"(25x25mm) angles etc. complete as specified by manufacturer & drawing and directed by Engr-in- Charge. |
| 57 | S& F powder coated GI T-section of size 1\"x1\" (25x25mm,19 gauge or 1mm thick) in square pattern of grid size 2\"x2\"(600x600mm). The frame work is supported from the ceiling with the help of \"J\" hook and GI wire / ms rod of 4mm dia of required size to maintain proper level etc.The frame work is supportedon side walls with the use of powder coated GI L section of size 1\"x1\" (25x25mm) angle complete all as per manufacturer instructions, specified and directed. |
| 58 | S&F 4 mm thick designed Non asbestos fiber cementbuilding boards, fixed or laid /inserted totimber /GI /Aluminium frame-work with screws complete all as specified anddirected. |
| 59 | M&L for 75mm thick PCCtype C2,1:3:6 using 40mm graded crushed stone aggregateas in sub base floorcomplete all as specified and directed. |
| 60 | M&L for 100mm thick PCCtype D2,1:4:8 using 40mm graded crushed stone aggregateas in sub base floorcomplete all as specified and directed. |
| 61 | M&L for 75mm thick PCCtype D2,1:4:8 using 40mm graded crushed stone aggregateas in sub base floorcomplete all as specified and directed. |
| 62 | M&L for 75mm thick PCC 1:3:6 type C2(Using 40mm graded crushed stone aggregate) as in plinth protectionfinishedeven and smoothusing extra cement.Joints to be given at every 3m interval and corners of buildings and fitted with bituminious mastic or equivalent filler complete all as specified and directed. |
| 63 | M&L for 40mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregates)as in flooring finished even and smooth without using extra cement completeall as specified and directed. |
| 64 | M&L for 18-20 mm thickmachine cut kota stone slab flooring over and including 20mm thick cement screed bedding layer in cement mortar 1:6 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including granite ( mirror) polishing complete all as specified and directed. |
| 65 | M&L for 18-20 mm thick machine cut kota stone slab as in skirting/dadoover and including 15 mm thick rendering in cement mortar 1:4 fixed & jointed with grey cement slurry mixed with pigment to match the shade of slab including granite ( mirror) polishing complete all as specified and directed. |
| 66 | M&L for frosted one side sheet glass, 3mm thick, plain ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each panecomplete all as specified and directed. |
| 67 | S & F 4mm plain one side frostedglass, ordinary quality, in squares n exc 0.5 sq. m each and fixed with putty or glazing with putty complete all as specified and directed. |
| 68 | M&Lfor preparation of untreated new wood/wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 69 | M&L for two coats of synthetic enamel paint (Ist quality) over one coat of red oxideon new steel surfaces of any description over 10cm in width or girthincluding preparation of surfaces complete all as specified and directed. |
| 70 | M&L for 40mm dia GI pipe Light grade with all necessary fittings laid in trenches, fixed to wall/pole/under road/floor etc for cable protection complete all as specified and as directed. |
| 71 | S&F steel water tubes medium grade galvanised with all fittings laid in trenchesbore of tube 20 mm complete all as specified and directed. |
| 72 | S&F steel water tubes medium grade galvanised with all fittings laid in trenchesbore of tube 25 mm complete all as specified and directed. |
| 73 | S&F medium grade galvanized steel tubingwith all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified anddirected. |
| 74 | S&F medium grade galvanized steel tubingwith all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified anddirected. |
| 75 | S&F rotational moulded PVC water storage tank 500 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top (thereated) including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and directed. |
| 76 | S&Ffancy type, chromium plated angle/ stop valve cast copper alloy screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed. |
| 77 | S&Ffancy type with long shank and cup (concealed type) chromium plated stop valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed. |
| 78 | S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 79 | S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed complete all as specified and directed. |
| 80 | S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25mm bore and fixed complete all as specified anddirected. |
| 81 | S&F 32mm waste fittings,brass,chromium plated for glazed ware sinks,basin,etc with long screwed shanks and fly-nuts,flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 82 | S&F Ball brass valves, high pressure, with polyethene float and fly nut complete, screwed for GI pipe or brass ferrule of 20mm bore complete all as specified and directed. |
| 83 | S&F grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap, complete all as specified and directed. |
| 84 | S&FPVC connectionspipe ,15mm dia size with PTMT nuts of length 600mm complete all as specified and directed. |
| 85 | S&F cast iron bend (Sand cast) of any radius with oval access door including jointing with cement joints for (100 mm bore)complete all as specified and directed. |
| 86 | S&F 75mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring jointslaid in trenches or in floors complete all as specified and directed. |
| 87 | S&F 110mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring jointslaid in trenches or in floors complete all as specified and directed. |
| 88 | S&F 75mm PVC (SWR)pipes single socketed in any length with rubber ring joints fixed to wallscomplete all as specified and directed. |
| 89 | S&F 110mm PVC (SWR)pipes single socketed in any length with rubber ring joints fixed to wallscomplete all as specified and directed. |
| 90 | S&F 75mm bore PVC (SWR) bends with rubber ring joints any radius complete all as specified and directed. |
| 91 | S&F110mm bore PVC (SWR) bends any radius with oval access door incl jointing with cement joints complete all as specified and directed. |
| 92 | S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 93 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed |
| 94 | S&F 110mm bore PVC (SWR) `P\"or \"S\" trap complete all as specified and directed. |
| 95 | S&FPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and directed. |
| 96 | S&F PVC (SWR) floor trap 75mm dia , plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 97 | M&L for plain cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in concrete bed including packing under & haunching against sides ofbore pipes 150mm dia pipe after the pipe are laid and testedcomplete all as specified and directed. |
| 98 | S&F 20 mm dia curtain rails stainless steel with fancy type golden coloured bracket complete all as specified and directed. |
| 99 | M&L for SGSW pipes 150 mm dia grade \"A\" laid in trenches and jointed complete all as specified and directed. |
| 100 | S&F designer type looking mirror of selected quality glass thickness not less than 6mm and of size 6.00 Sqft to 8.00 Sqft fixed to wall with wooden plug with CP brass screws and cup washers complete all as specified and directed. |
| 101 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 102 | S&F Steel rolling shutters thickness of laths in 1.25mm, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type with Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 103 | M&L for powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as speecified and directed. |
| 104 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, partitions,windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved makeonforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snapbeading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment.(ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and particle board shall be measured and paid separately under respective items. (iii) The accessories requiredfor partition as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered and no extra cost will be paid. |
| 105 | M&L for Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as speecified and directed. |
| 106 | M&L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.)complete all as speecified and directed. |
| 107 | M&L for12mm thick Granite (of any type) work(table rubbed and polished) for wall lining (veneering to wall) in cement mortar(1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and directed. |
| 108 | M&L for Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surface etc complete all as specified andand as directed |
| 109 | M&Lfor Non Skidceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to matchover and including screed bed or bedding layer 15 mm thick in cement mortar 1:6for laying floor finishes etc complete all as specified and directed |
| 110 | All as per item No 109.00but in skirting over and incl backing coat of 10 mm thick in CM 1:4 complete all as specified and directed. |
| 111 | M&Lfor Non Skidceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to matchover and including screed bed or bedding layer 15 mm thick in cement mortar 1:6for laying floor finishes etc complete all as specified and directed |
| 112 | M&L for pre polished coloured cement concrete chequred tile 300x300x25mm with grey cement and no pigment of approved quality size 300X300X 25mm thick on floors over and including 20 mm thick screed bed cement mortar 1:6 set and jointed in neat cement slurry and pointed with colour to match the tiles complete all as specified and directed. |
| 113 | M&L forrendering 15 mm thick in two layers 10mm +5mm in cement mortar 1:4 on external surfaces of brick work or concrete surfaces with using WPC finishing the surfaces even and smooth without using extra cement complete all as specified and directed.Note:- WPC will be measured and paid separately under respective item of this schedule. |
| 114 | M&L for 15mm thick rendering on other than fair faces in cement mortar 1:6 finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 115 | M&L fornewly plastered surface of wall appying two coat of white or tinted oil bound distemper over one coat of alkali resistant priming paint including 02mm thick wall care putty etc complete all as specified and as directed. |
| 116 | M&L preparation of new plastered surfaces of wall and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed. |
| 117 | M&L for preparation of new undecorated surface of wall and applying three coats of white washcomplete all as specified and directed. |
| 118 | S&Ftwo way angle cock 15mm bore cast copper fancy CP alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 119 | S&F bib tap fancy type cast copper alloy chromium plated with long shank & cup washer, crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed. |
| 120 | S&F 15 mm bore pillar tapscast copper alloy with hot & cold mixturechromium plated screwed down high pressure with or without letter hot or could with long screwed and shanks and fly nuts screwed for iron pipes complete all as specified and as directed. |
| 121 | S&F white/coloured vitreous china table top wash hand basin size 610x560mm excluding taps but including 32 mm dia chromium platedwaste fitting and PVC waste pipe 610 mm long andMS brackets complete all as specified and as directed |
| 122 | S&F Vitreous China wash down water closet pan (pedestal pattern) \"P\" trap with fixing bolts UF soft close slim seat cover, hinges, dual flush cistern fitting and fixing accessories complete all as specified and directed. Make:- JAQUAR, CAT No: LYS-WHT-38751P180UFSMZ or equivalent of make specified. |
| 123 | S&Fbrass chrome finish Health faucet for 15mm dia pipe with 8 mm dia, 1.2m long flexible tube and wall hook incl making connection and fixed in position complete all asspecifiedand directed. |
| 124 | S&FHealth faucet (ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connection and fixed in position complete all asspecifiedand directed. |
| 125 | S&F vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and directed. |
| 126 | S&F Vitreous China wash down water closet pan (pedestal pattern) (excluding flushing cistern) including Pedestal pan and trap, and connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.complete and including seat cover etc complete all as specified and directed. |
| 127 | S&F10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any complete all asspecifiedand directed. |
| 128 | S&F vitreous china wash hand basin oval special type 510x410mm including cutting for and pinning in ends of brackets or erecting stand including CP fancy type 15 mm pillar taps and 32mm dia PVC waste pipe, and32 mm dia brass CP waste coupling and brackets complete all as specified. |
| 129 | Suppy and fixing Vitreous China bowl urinal back or corner wall type, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, but including waste pipe) complete including providing and fixing plugs ,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement with brackets ,flush pipes ,grating and union for discharge pipe etc complete all as specified and as directed. |
| 130 | S&F cast iron \"S\" trap including jointing with cement mortar of 100mm dia icomplete all as specified and as directed. |
| 131 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass with CP brackets and CP frame size 600mm long complete all as specified and directed. |
| 132 | S&F 100 mm stainless steel butt hinges, medium weight, cold rolled, complete all as specified and directed. |
| 133 | S&F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 134 | S&F central basin mixture without popup waste with 450mm long braided hoses screwed down for 15mm bore etc complete all as specified and directed . Make- Jaquar Cat No OPP-15011BPM or equivalent of make specified |
| 135 | S&F Brass chromium plated shower rose 125mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed. |
| 136 | M&L for sand cushioning for protection of underground cable, consolidatedand compacted with clean dry sand complete all as specified and directed. |
| 137 | M&L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 10Sqmm 2 core laid in trench/pole/on wall completer all as specified and directed. |
| 138 | M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size (green in colour) through and including 20mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet coverfor fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed for the followings: - |
| 139 | One light point/ Bell/ one fan point controlled by one switch |
| 140 | One 3 pin socket outlet, 6 Amp on the same board with other switches |
| 141 | One 3 pin socket outlet, 6 Amp independent |
| 142 | M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet coverfor fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed. |
| 143 | S&F Switch piano, flush type single pole, one way 6 Ampcomplete all as per specified and directed. |
| 144 | S&F Switch piano, flush type single pole, one way 16 Ampcomplete all as per specified and directed. |
| 145 | S&F Socket outlet 2 in 1, 6 pin, 6 and 16 amp flush typecomplete all as per specified and directed. |
| 146 | S&F Socket outlet 2 in 1, 5 pin, 6A complete all as per specified and directed. |
| 147 | S&F Sheet metal enclosure powder coatedfor MCB DB double door single pole & Neutral 4 way with 200Amp ratedcommon bus bar at incomming complete all as specified and directed. |
| 148 | S&F Sheet metal enclosure powder coated for MCB DB double door single pole & Neutral 8 way with 200Amp common bus bar at incomming complete all as specified and directed. |
| 149 | S&F Ceiling rose, surface bakelite 3 terminals complete all as specified and directed. |
| 150 | S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed. |
| 151 | M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR Part-I connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. |
| 152 | M&L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through and including PVC conduit 25mm complete all as specified and directed.Note: For concealed sub-main wiring cutting chases will be included in quoted rate. |
| 153 | Supply and fixing 240V, 10KA \"C\" curve single pole miniature circuit breaker (MCB) 6 to 32 Amps,in the MCB DB complete with connection testing and commissioning. complete all as specified and directed. |
| 154 | Supply and fixing240V, 10KA \"C\" curve SPN miniature circuit breaker (MCB) 6 to 32 Amps,in the MCB DB complete with connection testing and commissioning. complete all as specified and directed. |
| 155 | Supply and fixing240V, 10KA \"C\" curve SPN miniature circuit breaker (MCB) 40 to 63 Amps,in the MCB DB complete with connection testing and commissioning. complete all as specified and directed. |
| 156 | Supply and fixing LED tube light batten box type made of CRCA sheet with decorative end caps suitable with ultra bright glass LED tube light 1x 18/20 watt T8 type single side connection complete with both end bi-pin holder and all accessories internally prewired and fixed to wall/ceiling incl fittings accessories and connecting up with twin core flexible copper conductor cable suitable size complete all as specified and directed. |
| 157 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounitng arrangements and provision of 1.5 sq mm three core copper dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed. |
| 158 | S & F for energey efficient exhaust fan of 250mm sweep made of metal body ventil Air-DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as directed by GE. |
| 159 | S & F for energey efficient exhaust fan of 300mm sweep made of metal body ventil Air-DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as directed by GE. |
| 160 | S & F for wall mounted LED tube light fitting 10 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed. |
| 161 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V,1200 mm sweep. Min air delivery 220 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make: Usha/Bajaj/HAVELLS |
