|
| 1 | Demolition to cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 2 | M&L for 75mm thick PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) in plinth protection path/hardstanding/drain bed/ jhura bed finished cement concrete surfaces fair and even including forming construction joint filled with CM (1:6) complete all as specified and as directed. |
| 3 | Demolition of Stone slabs and tiles of any description or thickness laid dry or dry and pointed in floors, aprons etc complete all as specified and as directed. |
| 4 | M&L for Lacquer coated coloured chequered cement concrete tiles 300 x 300mm x 25mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster (1:4) complete all as specified and as directed. |
| 5 | M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and as directed. |
| 6 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 7 | Dismantling old PGI/CGI sheeting of any gaugethickness, including Nainital. Sikkim or similar pattern roof/facia etc complete all as specified and as directed. |
| 8 | S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof coveringfixed with self tapping screws as in roof complete all as specified and as directed. |
| 9 | S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screwscomplete all as specified and as directed. |
| 10 | S&F in repairs for Hollow Rolled sections as in main and cross beams, hip and jack rafters; purlins where connectedto common rafters and running rails and guides for sliding doors; fixedwithangle cleats or other connecting plates confirming to Fe-290 (Gde E165)complete all as specified and as directed. |
| 11 | Taking down cement plaster on brick or stone walls or concrete surface, includingracking out joints, hacking for key, scrubbing down with water etccomplete all as specified and as directed. |
| 12 | M&L for rendering 15 mm thick in CM (1:4) on stone masonry, finished even & fair without using extra cement complete all as specified and as directed. |
| 13 | S& F in repairsReinforced precast cement concrete (1:2:4)type B1 (using 20 mm graded crushed stone aggregate ) asin landings, cover slabs (for man holes, drains etc.)chullah hoods,chajjas, water troughs, mangers, shelves and similar articles with plain faces .(Reinforcement shall be measured separately.) complete all as specified and as directed. |
| 14 | S&F TMT bar 5mm dia and over upto and including 10mm dia in stirrups , cut to length, bent to shape required, including cranking, bending spirally for hooping of columns, hooking ends and biniding wireand including mild steelw wire (annealed) not less than 0.90 mm dia or securing with clipscomplete all as specified and as directed. |
| 15 | Demolition of concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed. |
| 16 | M&L for PCC (1:3:6), type C-2 (using 20mm graded curshed stone agreegate) as in Toe walls etccomplete all as specified and as directed. |
| 17 | M&L for PCC(1:3:6),type C-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 18 | M&L for PCC(1:3:6),type C-1 (using 20mm graded crushed stone aggregate) as in copingcomplete all as specified and as directed. |
| 19 | Use & waste formwork to faces of walls, Toe walls,retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better in rough finished surfaces complete all as specified and as directed. |
| 20 | Dismantling posts or struts (wood, steel or R.C.C ) any section , including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 21 | M&L for PCC (1:3:6),type C2 (40 mm graded crushed stone aggregate ) as in foundation and mass concrete complete all as specified and as directed. |
| 22 | S&Fin repairsPre PVC coated chain link fencing, size of mesh 50mm x 50mm made out of 3mm dia GI wire (confirming to relevant IS ) to any type of standard rails, straining bolts etc complete all as specified and as directed. |
| 23 | S&F Joist, channel, angle, or tee sections, fixed independently, with connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed. |
| 24 | S&F MS bolt of dia 11 to 15 mm and length of bolt exc 5 cm and n exc 10 cm (Machine made) with hexagonal or square head at one end and screwed other with washer out of shank complete all as specified and as directed. |
| 25 | S&F 10mm and over round barshooping of columns, hooking ends aas in line wire for sec fencing etc complete all as specified and as directed. |
