|
| 1 | Complete removal of all existing roof treatment from RCC roof including old hussion felt & preparation of surface with wire brush and cleaning with water complete and M&L for water proofing treatment on non approachable / accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :-(a)Brushing neat cement slurry @ 3Kg per Sqm on roof slab.(b)15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab.(c)Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface.(d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture\"s instruction.Note : Supply only WPC shall be measured and paid separately under relevant item. |
| 2 | M&L for applying 2 coats aluminium paint over bituminous surface of membrane Complete all as specified & directed. |
| 3 | M&L for 22mmthick machinepressed &polished‘cementconcretetileswithgreycementwithoutpigmentofsize 250 mm x 250 mm laid in neat cement slurry over and including 15 mm thick bed screed in CM 1:4 mixed with chemical compound PIDIPROOF LW of DR FIXIT of PIDILITEINDUSTRIESLTD 200 milli - litremixed with 50 Kg of cement or STP No 1 (LIQUID) of STP LTD in proportion 200 milli litre per 50 Kg cement,aspermanufacturesinstructionsandtilesproperlylaidwith3mmwidejoints filledwithFEVIMATETGofDRFIXITofPIDILITEINDUSTRIESLTDor TILEGLUEofSTPLTDaspermanufacturesinstructions complete all as specified and directed by Engr- in - charge. |
| 4 | Taking down eaves gutters and rain water pipes (any size or patterns)including all fittings,heads,shoes,bends,swan-necks etc complete all as specified and as directed by Engr-in-Charge. |
| 5 | S&F PVC(SWR)pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and as directed by Engr-in-Charge. |
| 6 | S&F PVC(SWR)pipe 75 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and as directed by Engr-in-Charge. |
| 7 | S&F PVC(SWR)bends any radius 110 mm dia complete all as specified and as directed by Engr-in-Charge. |
| 8 | S&F PVC(SWR)bends any radius 75 mm dia complete all as specified and as directed by Engr-in-Charge. |
| 9 | M&L PVC(SWR) Tee of radius 110mm dia |
| 10 | M&L PVC(SWR) Tee of radius 75mm dia |
| 11 | S&F in repair PVC(SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and as directed by Engr-in-Charge. |
| 12 | Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 Sqm each complete all as specified and as directed by Engr-in-Charge |
| 13 | Taking down chowkhat with shutter without taking off shutter from chowkhat exceeding 1.5 Sqm but n.exc 4sqm each complete all as specified and as directed by Engr-in-Charge |
| 14 | Taking down shutter of any description nexc 1 Sqm each complete all as specified and as directed by Engr-in-Charge |
| 15 | Taking down shutter of any description exc 1 Sqm but n\"exc 2 Sqm each complete all as specified and as directed by Engr-in-Charge |
| 16 | S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,complete all as specified and as directed by Engr-in-Charge. |
| 17 | S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,complete all as specified and as directed by Engr-in-Charge. |
| 18 | S&F 35mm Flush shutters(ISI Marked) solid core construction, with block board core and plywood, commercial type on both sidescomplete all as specified and as directed by Engr-in-Charge. |
| 19 | S&F Plain framed, panelled shutter (two panel) factory made 35 mm thickof 2nd class HW rail and stylewith lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), Kiln seasoned and chemically pressure treated,. complete all as specified and directed. |
| 20 | S&F 35mm thick glazed and skeletion door shutters 2nd class hardwood without sash bars complete all as specified and as directed by Engr-in-Charge. |
| 21 | Re-fixing shutters exc 1 sq.m but n.exc 2sq.m each in same opening completed all as spd |
| 22 | Re-fixing shutters n.exc 1 sq.meach in same opening completed all as spd |
| 23 | S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces (a) Window frame of cross section 101mmx40mmx1.5mm thick.(b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick.(c) Sliding shutter frame of cross section 40x18x1mm. (d) Aluminium glazing stip of size 18.2x16.66mm. (e)4mm thick flat glass superior quality for two shutter.(f) IDPE rubber gasket for fixing glass.(g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters.(j)aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter.(k) Fixing screws for frame with wall 06 per window with fancy design.(Note: Window will be measured outer to outer frame and no extra to be paid.) |
| 24 | S&F Powder coated aluminium windowand ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 25 | S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and as directed by Engr-in-Charge. |
| 26 | Supplied and fixed factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame as per specification & drawing complete all as specified and as directed by Engr-in-Charge. |
| 27 | S&F GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and as directed by Engr-in-Charge. |
| 28 | S&FMS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge. |
| 29 | S&F mild steel sliding door bolts 300mm long complete all as specified and as directed by Engr-in-Charge. |
| 30 | S/F 100mm size MS butt hinges, medium weight cold rolled complete all as specified and as directed by Engr-in-Charge. |
| 31 | S & F 150mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge. |
| 32 | S & F 150mm long Aluminium handle cast type anodised complete all as specified and as directed by Engr-in-Charge. |
| 33 | S&F 125mm size aluminium handles, cast type anodised complete all as specified and as directed by Engr-in-Charge. |
| 34 | M&L for mild steel works as in framed work such as grills, gratings, etcwith ends of bars shoulderedand/or riveted or forged into spikes and similar works conforming to Fe-290, Gde-E165 etccomplete all as specified and as directed by Engr-in-Charge. |
| 35 | M&L for 18/19 mm thickpreliminated particle board Exterior grade preliminatedone side with decorative choice laminated & other side balancing white laminated fixed with screw to timber fram workcomplete all as specified and as directed by Engr-in-Charge. |
| 36 | S & F 30 mm continous (piano ) hinges mild steel, bright finish or electrogalvanisedcomplete all as specified and as directed by Engr-in-Charge. |
| 37 | S&F 75 mm Hasp & staple MSstove enammeled black , including bolt to hinge plate and fixed with screwcomplete all as specified and as directed by Engr-in-Charge. |
| 38 | M & L for preparation of new surfaces & apply two coats of synthetic enamel paint over one coat primer exc 10 cm width/girth including preparation of new surface on wooden surface complete all as specified and as directed by Engr-in-Charge. |
| 39 | M&L for PCC 1:2:4 type B1 20mm graded stone aggregate as in padding, hold fasts/filling of chowkhats or similar work complete all as specified and as directed by Engr-in-Charge. |
| 40 | Hacking out old broken glass any thickness from metal/wooden frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed by Engr-in-Charge. |
| 41 | S & F Sheet glass, ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane 3mm thick complete all as specified and as directed by Engr-in-Charge. |
| 42 | S & F Sheet glass, Figured glass, pin head typeand glazing with oil putty in square exc 0.5 sqm in each pane 3mm thick complete all as specified and as directed by Engr-in-Charge. |
| 43 | Dismantling water tanks and removingexc 250 & nexc 500 ltrs capecity complete all as specified and as directed by Engr-in-Charge. |
| 44 | Dismentling water tanks and removingexc 500 and n exc 1000 ltrs capecity complete all as specified and as directed by Engr-in-Charge. |
| 45 | S&F 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions, including 20mm dia of ball valved high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed with anti microbial property. |
| 46 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions, including 20mm dia of ball valved high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed with anti microbial property. |
| 47 | S&Fin repair 20mm dia of ball valves high pressure of PTMT with epoxy coated alumunium rod & high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and as directed by Engr-in-Charge. |
| 48 | S&F repair 15mm dia of ball valves high pressure of PTMT with epoxy coated alumunium rod & high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and as directed by Engr-in-Charge. |
| 49 | S&F as in repair PVC water tank cover for 500/1000 ltr capacity suitable for closing of water tank with locking device and all as specified and directed. |
| 50 | Taking up or down steel tubing and connections including for refixing or removal 15mm borecomplete all as specified and as directed by Engr-in-Charge. |
| 51 | All as per Item No 50 here in before but 20mm bore complete all as specified and as directed by Engr-in-Charge |
| 52 | S&F steel tubingand connection in new or old position to walls,ceiling,floors etc complete all as specified and as directed15 mm bore medium grade , with all fittings ,fitted to wall and ceiling or laid in floor complete all as specified and as directed by Engr-in-Charge. |
| 53 | All as per item No 52 here in before but for 20mm dia complete all as specified and as directed by Engr-in-Charge |
| 54 | Dismantling wall and ceiling board (fibre,pulp,insulations etc)or insulation board any thickness including cover fillets complete all as specified and as directed by Engr-in-Charge. |
| 55 | S&F Anodised alumunium snap grid frame work for false ceiling grid of size 605mmx605mm complete hanges from GI wire complete all as specified and as directed by Engr-in-Charge. |
| 56 | S&F 4mm thick texture finish type ceiling board fixed to timber/metal framed work with screw as in ceiling snap grid complete all as specified and as directed by Engr-in-Charge. |
| 57 | Supply and fix in repair, sinks with drainage board made of stainless steel 1 mm thick sheet for, kitchen or laboratory with plugs, washers and waste pipe; cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mmcomplete all as specified and as directed by Engr-in-Charge. |
| 58 | S&F in repairs utensil rack/kitchen rack stainless steel size 850xmmx800mmx270mm as approved make and fixed to wall and as specified and directed by Engineer-in-Charge at site. |
| 59 | S&F in repairvitreous china wash Basin white flat back size 550 x 400mmincluding brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed by Engr-in-Charge. |
| 60 | S&F in repairs pillar tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettred head `HOT\" or `COLD\" with long screwed shank and flynuts screwed for iron pipe all as specified and directed by Engineer-in-Charge. |
| 61 | S&F in repairs bib tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettred head, screwed for iron pipe etc and all as specified and directed |
| 62 | S&F in repairs PVC valveless syphonic action with flushing system fancy type low level flushing cistern 10 ltr. Capacity of approved incl flush pipe of 32mm bore and all as specified and directed. |
| 63 | S&F in repair PVC Connections 15mm size with PTMT nuts of length 450mm including washer . |
| 64 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and as directed by Engr-in-Charge. |
| 65 | S & F in repair Tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass.complete all as specified and as directed by Engr-in-Charge. |
| 66 | S&F in repair 15mm, stop valve/angle valve, cast copper alloy fancy type chromium plasted with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design and all as specified and directed by Engr-in-Charge. |
| 67 | S&F as in repair 15mm two way angle valve, cast copper alloy fancy type chromium plasted screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in 15mm bore and all as specified and directed by engineer-in-charge. |
| 68 | S&F in repair 15mm dia bore, stop valve but long shank (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in pipe and all as specified and directed |
| 69 | S&F in repairs brass CP wall mixer tap, fancy type, half turn 15mm dia bore (three in one) for mixing hot and cold water screwed down for iron pipe and fixed in wall and all as specified and directed. |
| 70 | S&F in repairs brass 15mm dia CP mixer basin tap (Mixer pillar tap) 15mm dia bore for mixing hot and cold water with lettered `HOT\" and `COLD\" screwed down for iron pipe with fancy design and all as specified and directed. |
| 71 | Supply and fixing as in repairs vitreous china urinal , half stall type, whitewith grating and union for discharge pipe (excluding flushing cistern,flush pipe and waste pipe) complete all as specified and directed. |
| 72 | Supplied and fixed in repairvitreous chinawareEWC padestal type closet with whiteseat & cover with flat bottom with hinging device all as specified and directed. |
| 73 | S&F in repair vitreous china squatting pan , Orissa pattern size 580 x 440 mm white, with integral foot rest including connection to trap, and to flush pipe, anti-syphonage etc |
| 74 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), and rubbish offpremises etccomplete all as specified and as directed by Engr-in-Charge |
| 75 | M&L for light shadevitrified ceramic tiles 10mm thick (square/rectangular)polished,area of each tiles n exc 0.36sqm over 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge. |
| 76 | ditto as per item No 75 here in before but in skirting dado etc over 10mm thick cement plaster in CM (1:4) complete all as specified and as directed by Engr-in-Charge. |
| 77 | M&L for Non- skid colour ceramic tiles,7 to 8mm thick square/rectangular area of each tile exc 0.11 sqm but n exc 0.18sqm in floor over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed. |
| 78 | M&L for coloured glazed ceramic colour tiles in vertical surface in Skirting/Dados 350mmx250mmx7mm /450x350x7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and as directed by Engr-in-Charge. |
| 79 | M&L for Machine cut kota stone slab flooring 18-20 mm thick set over and including 15mm thickscreed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishingcomplete all as specified and as directed by Engr-in-Charge. |
| 80 | All as per item No-79 but here-in-before as in skirting over 10mm thick cement plaster in CM 1:4complete all as specified and as directed by Engr-in-Charge. |
| 81 | Material and Labour for 18mm to 20mm thick machine cut (table rubbed and polished) Granite of any type as in steps, jambs, pillars, cills, cooking platforms like in CM 1:4 including pointing with white cement mixed with admixture of pigment to match the shade of the slab complete including screed bed 15mm thick in CM 1:6 all as specified and as directed by Engr-in-Charge. |
| 82 | Rounding to edges of stone slabs on edge such as in steps cooking platform and other similar situationscomplete all as specified and as directed by Engr-in-Charge. |
| 83 | Demolition ofcement concrete(un-reinforced) in ground floors and pavingnot exceeding 15 cm thickness below or above the ground floor etc complete all as specified and as directed by Engr-in-Charge. |
| 84 | M&L for 100 mm thick cement concrete in foundations/sub base of floor in cement morter (1:3:6) type C-240mm graded stone aggregate complete all as specified and as directed by Engr-in-Charge. |
| 85 | M&L for 75 mm thick cement concrete1:3:6 type C2,using 40 mm grade stone aggregate finished even & smooth without using extra cement as in plinth protection etc. complete all as specified. |
| 86 | M&L for chequered cement concrete tiles with grey cement and no pigment 30cmx30cmx25mm thick over 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engr-in-Charge. |
| 87 | M&L for machine pressed precast concrete interlocking paver block with Grey Cement and pigment any shape and size conforming toIS 15658-2006 of 60mm thickness , M-35 Grade laid over and including 25mm thick sand cushioning all as specified and as directed by Engr-in-Charge. |
| 88 | M&L for spreading and levelling of sand in layers n exc 25cm thick over sub basecomplete all as specified and as directed by Engr-in-Charge. |
| 89 | Demolition ofBrick/stone works masonry, built in cement mortar or cement limemortar including all quoins, arches, pillars etc but excludingashlar facing, dressed stone work andpre-cast concrete articles complete all as specified and as directed by Engr-in-Charge. |
| 90 | M &L for Brickwork with fly ashmodular bricks, strainght or curved on plan exc 6M mean radious radius built in Cement mortar 1:6complete all as specified and directed. |
| 91 | M&L for brick work with fly ashmodular bricks,curved or straight on plan to any radius in half brick wall builit in CM(1:4)complete all as specified and as directed by Engr-in-Charge. |
| 92 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge. |
| 93 | M&L for rendering on other than fair faces of brick work 10mm thick in CM 1:6 and to be finished smooth and even with out using extra cement for internal surfacecomplete all as specified and as directed by Engr-in-Charge. |
| 94 | M&L for rendering on other than fair faces of brick work 15mm thick in CM 1:4 and to be finished smooth and even with out using extra cementfor external surface incl WPCcomplete all as specified and as directed by Engr-in-Charge. |
| 95 | M&L for rendering 5mm thick in cm 1:3 on ceilling. surfaces finished even and smooth without using extra cementcomplete all as specified and as directed by Engr-in-Charge. |
| 96 | M&Lforpreparation of new surfaces and applying three coat of white wash on ceiling including cornices etc complete all as specified and directed by Engr-in-Charge. |
| 97 | M&L for preparingthe new plastered surfacesof walland applying Twocoat of cement based paint after one coat of white primer complete all as specified and as directed by Engr-in-Charge. |
| 98 | Complete removal of existing treatment and preparing the old surface of walls of any height of bldigs and apply two coat ofcement base paint over a coat alkali resistant primer and as directed by Engr-in-Chare at site. |
| 99 | M&L for preparing newly plastered surfaces and applying two coats of distember oil emulsion white or tinted on walls and including average 3mm thick white wall care putty to achieve even and smooth surfacecomplete all as specified and as directed by Engr-in-Charge. |
| 100 | M&L for preparing of old surfaces, washing, rubbing down and stopping of disstempered and painted surfaces and applying two coats of distember oil emulsion on wall complete all as specified and directed. |
| 101 | Demolition of RCC in floors (other than ground floors beams,chajjas,lending slab and similar suspended works and removingall demolished material from the site and deposit at low laying area up to distance 250 mtr as directed by the Engr-in-Charge. |
| 102 | M&L for RCC nominal mix 1:2:4 reinforced type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and column in floors, roofs, balconies, canopies, deck slabs and in shelves and the like and including necessary form work completed all as specified and directed |
| 103 | M&L for mild steel deformed TMT bar 8mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm diacomplete all as specified and as directed by Engr-in-Charge. |
| 104 | M&L for plain cement concrete type E2 1:5:10 ( 40 mm graded bricks aggregate in sunken portion complete all as specified and directed. |
| 105 | M&L for rendering 15 mm thick on concrete orbrick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement.Note - WPC will be measured and paid separtely |
| 106 | M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat overplaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and as directed |
| 107 | M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed. |
| 108 | M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as insunken portion with water proofing compound as per manufacturing instructionsand making adequate slope toward spout pipe complete all as specified and as directed. (Note wpc shall be measured and paid for seperatlly |
| 109 | Supply only liquid water proofing compound.ISI Marked |
| 110 | M&L forrepair and rendering 10mm thickin CM 1 :3on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete includingcleaning of viisible reinforcementandtreating with cement slurry also necessary repair to cracked concreteif any with cement concrete1:2:4 Type B-0 using 12.5mm gradedaggregateincluding necessary scafolding work for double/single storey bldgscomplete all as specified and as directed by Engr-in-Charge. . |
| 111 | S&F in repairs decorative curtain rod made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colour and pattern as approved overall dia 28 to 28mm, includiing and including two nos brackets on each ends alongwith globe on each ends for earch window/door fro fixing complete all as specified and directed with fancy design and approved by engineer-in-Charge. |
| 112 | S&F as in repairs corner glass shelf 300mm (with fancy ABS brackets) of size (300x300)mm complete all as approved make by Engr-in-Charge at site. |
| 113 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 114 | S&F as in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commerial ply wood and fixed to wooden plugs with chromium plated brass screwes and cup washer complete (with fancy design) |
| 115 | S&F bath cabinet mirror of size 350x450mm made of PTMT alloy complete all as specified with fancy design. |
| 116 | S&F as in repairs health faucet(ABS body) mild steel chromium plasted suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed |
| 117 | Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof covering |
| 118 | Supply and fix Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpaas in roof covering/cladding to wall,fixed with self tapping screws as specified. |
| 119 | Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpaas in roof covering/cladding to wall,fixed with self tapping screws as specified and directed. |
| 120 | Dismantling framed timber scantlings 40 sq. cm and over in section, in any position |
| 121 | S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats et conforming to I. S 1161-1979 grade St.-240 |
| 122 | M&L for in applying two coats of synthetic enamel paints over a coat of red oxideprimer on new steel surfaces over 10 cm width or girth including preparatinon of surfacescomplete all as specified and as directed by Engr-in-Charge. |
| 123 | Taking down wall panelling board any thickness including cover fillets complete all as specified and as directed. |
| 124 | S &F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame and including PVC Fillet 5mm thick PVC sheet fillet of width35mm for wall paneling inclusive of fixing on to wall to make PVC Frameas per specificationsand drawing complete all as specified and as directed. |
| 125 | Dismantling of interlocking tiles of any description and any thickness and removing from site complete all as directed. |
| 126 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). Complete all as specified & directed. |
| 127 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. Complete all as specified & directed. |
| 128 | Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 129 | M&L for brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in cm (1:6) including Demolition ofBrick/stone works masonry, built in cement mortar or cement limemortar including all quoins, arches, pillars etc but excludingashlar facing, dressed stone work andpre-cast concrete articles complete all as specified and as directed by Engr-in-Charge. |
| 130 | Material & labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces,inCM(1:4)surface finished even and smooth without using extra cement complete all as specified and directed. |
| 131 | M&L for preparation of new plasterredsurfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 132 | M&L for 60 mm thickMachine pressed precast concrete colouredinterlocking paver block any shape and size confirming to IS 15658-2006 , M-35 Grade with grey cement and no pigment complete all as specified and directed. |
| 133 | All as per item No 132 here in before but except paver block |
| 134 | supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 Mm thick in each layer complete all as directed |
| 135 | M & L for Cement concrete 1:2:4 Type B2( using 20mm graded stone aggregate) in surface channels and drains complete all as specified and directed. |
| 136 | Digging out roots (any dia or girth), filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material and clearing site complete all as specified and directed. |
| 137 | Supply and fix PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed. |
| 138 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
