|
| 1 | Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame)complete all as specified and directed. |
| 2 | Taking down shutters exc 1 Sqm and n exc 2 Sqm Each complete all as specified and directed. |
| 3 | Refixingshutters of any description exc 1 sq. m and n exc 2 sq. m each in same position complete all as specified and directed.. |
| 4 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 5 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window / Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp?ressive strength of58N/mm2,modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property ofbeingtermite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetly complete all as specified and directed. |
| 6 | S&F wood plastic composite (WPC) factory made door shutter of 30 mm thickness made out of single pieces extruded wpc (wood plastic composite) profile with homogenous fine cellular structure made with plastic and wood powder having solid structure which is eco friedndly with density not less than 650 kg/Cum,and UV digitally printed to the desired design with UV lacquer coated to give surface added strength and protectionandhigh grade uv resistance and with heat, fire retardant will be hungand screws withdrawl strength 1800 n(face) & 900 n (edge), minium compressive strength of 50n/mm2 , E=900 n/mm2 and resistance to spread of flame of class a category with property of being teRmite / borer proof water/moisture proof and fire retardantand fixing with stainless stel butt hinges of required size with necessasry full body threaded star headed counter sunk s.s screw of size 10mm dia and 100 mm long , complete all as per direction of engg-in- charge. |
| 7 | S & F 35 mm thick, factory made Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 8 | S & F 35mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 9 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 10 | S&F floor door stopper [ ISI marked ] of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and as directed. |
| 11 | S&F150 mm long aluminium, anodised, barrel tower bolts of extruded section [ ISI marked ]complete all as specified and as directed. |
| 12 | S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. |
| 13 | S & F 100 mm long, stainless steel butt hinges fixed with stainless steel hinge pin etc complete all as specified and directed. |
| 14 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised [ ISI marked ] complete all as specified and as directed. |
| 15 | S & F 300 mm long,mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete all as specifed and directed. |
| 16 | S & FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed. |
| 17 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land exc 1.5 km but nexc 5.00km complete all as specified and directed |
| 18 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 19 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4,mixed with integral water proofing compoundwith weight of cement in top layer as per manufacturer\"s instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 20 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 21 | M & L for preparing newly plastered surfaces of wall and applyingtwo coats of oil bound washable distemper over a coat ofprimer including applying one or more coat of wall care putty to get a smooth surface including making good any undulations on the surfacescomplete all as specified and as directed.Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS(ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 22 | M&L for preparation of new platered surface of wall and applyingtwo coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, dart pick up resistant,silicon enhanced,UV resistant and PU enhanced propertyover a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfacesincluding all necessary scaffolding,complete all as specified and directed.Note :-Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 23 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal ofdebris and rubbish to a distance n.exe 100 mcomplete all as specified and directed. |
| 24 | Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 25 | M & L for 25 mm thick, plain cement concrete 1:2:4,type B-0 (using 12.5 mm graded stone aggregate)as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed. |
| 26 | M & L for double charged Vitrified, designed, light shade coloured (light shade), tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 27 | M & L for double charged Vitrified, designed, light shade coloured, tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm as in vertical surfaces such as skirting,dado, etc including 10 mm thick bedding in cement mortar 1:4 and necessary cutting of tiles complete all as specified and directed. |
| 28 | M&L for Coloured Glazed ceramic tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 29 | M & L for post construction Antitermite treatment by treating At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 30 | M&L for granite floor strips of 18 to 25mm thick , width not exceeding 10cm for the door cills fixed with approved quality adhesive complete all as specified and as directed. |
