|
| 1 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed |
| 2 | M&L for rendering 15 mm thick in CM 1:6 over stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed. |
| 3 | M&L for 15 mm thick rendering on stone masonary wall surfaces in CM 1:4finished fair and even all as specified and as directed. |
| 4 | M&L for preparation ofnewly plastered or unplastered/undecorated surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified. |
| 5 | M & Lfor preparation of New decoratedsurface on walls and applying twocoat of acrylic weather proof paint (Exterior grade) over a coat of primer complete all as specified and directed. |
| 6 | Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified. |
| 7 | M&L Steel work in tubular trusses, Pillars including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1998 grde St-240 ,complete all as specified and directed. |
| 8 | M&L for framed brackets of angles or tees with web and franges cut to shape, drilled and countersunk for screw incl bending and welding angles, as necessary gusset plate plates, reviting etc 10 kg each brackets confirming to Fe 290 Gde E-165 complete all as specified and directed. |
| 9 | M&L preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cmand applying two coats of synthetic enamel paint complete all as specified andas directed. |
| 10 | Dismantling Plain or corrugated Asbestos cement including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 11 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws etc; complete all as specified and as directed. |
| 12 | Taking down chowkat or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame and removing to store complete all as specified and directed. |
| 13 | Taking down shutters of any description and in any positionexceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed. |
| 14 | S&F factory made 35mm thickflush shutters , solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified and directed. |
| 15 | M&L preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 17 | M&L Vitified Ceramic tiles Dark shade8to 9 mm thick (square/rectangular) polished/Matt/Glossy, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in epoxy grout and including 15 mm thick screed bed in CM 1:4, complete all as spcified and directed. |
| 18 | All as above but on vertical surface as in skirting/Dados over 8to 9 mm thick plaster cm 1:4. |
| 19 | M & L forglazed coloured white tiles of size 450x300x 7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with white cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete all as specified and directed. |
| 20 | M& L for applyingCement putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as all specifiedand directed. |
| 21 | S&F in repair 150 mm long floor door stopper of a brass body andtongu with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 22 | Taking up or down15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 23 | Taking up or down20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 24 | S&F (concealed / open)20 mm outer diaCPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore.. |
| 25 | S&F (concealed / open) 25mm outer diaCPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore.. |
| 26 | Dismantiling of stone slabs and tiles (Kota stone etc.)of any discription or any thickness in floors, aprons, skirting, dado etc.laid bedded and pointed in any mortar complete all as specified and directed. |
| 27 | M&L for 20mm thick Granite jet Black (of any type) work (table rubbed and polished) in cooking plateform, Jambs cill and like set in cement mortar (1:4) inlcuding pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including rounding of exposed edges of slab smoothly and polished complete all as specified and directed. |
| 28 | M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete all as specified and directed. |
| 29 | Demolition of pre-cast concrete block masonry built in cement mortar of any description in any position complete all as directed. |
| 30 | M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mmgraded stone aggregate in the proportion as directed) exc 10cm in width and set and jointedin Cement Mortar (1:6) complete all as specified and directed. |
| 31 | Demolition of cement concrete (un-reinforced) of any description & in any position not specifically providedcomplete including dismantling of floor tiles etc complete all as specified. |
| 32 | S&F in repairBib taps , cast copper alloy screwed down high pressurewith crutch or butter flyhandle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified . |
| 33 | S&F in repair Stop valves, fancy type chromium platedISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubingpipe, high pressure, with crutch butter fly handlecomplete all as specified |
| 34 | S&Fpillar taps in repair of cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with long swan shanks and fly nuts screwed for iron pipe, 15mm bore fancy type complete all as specified and directed. |
| 35 | S&F in repair for Vitreous china wash basin, white, flat back, size 550 X 400mm excluding taps, waste, chain and plug and pocelain stopper but incl brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete fixed in repairs complete all as specified and directed. |
| 36 | S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified and directed. |
| 37 | S&FBrass, sliding door bolt 300 mmwithsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 38 | S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified and as directed. |
| 39 | S&F in repair PVC (SWR) floor trap plain with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 40 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore complete all as specified and directed. |
| 41 | S&F in repair PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 42 | S&F in repair PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 43 | M & L 100mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) as in sub base including use of necessary form work complete all as specified and directed. |
| 44 | S & F in repairStainless steel curtain rods25mm dia fancy type with required supports, and open/end bracketscomplete all as specified and directed. |
| 45 | S&F in repair sinks with drainage board made of stainless steel1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 46 | S&F for 75 mm hasp and staple, safty type, aluminium anodised with mild steel hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 47 | S&F for continuous (piano) hinges, mild steel, bright finish or electrogavanised, width of flaps (when open) 40mm complete all as specified and directed. |
| 48 | M&L prepartion of old wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 49 | S & F powder coated anodised Aluminium alloy sections sliding windows with frames 92 X29.6 X1.10mm , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note : Making all edges i.e. cill and jamb good by cement mortar 1:3 |
| 50 | M&L for PCC 1:2:4 type B1 (using 20mm graded stoneaggregates) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed. |
| 51 | M&L forMachine cutkota stone slabflooring 20-25mm thick over cement screedbase laid andjointed with grey cement slurrymixed with pigment to match theshade of the slab including rubbingand polishing and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 52 | M&L for Kota stone slab 20-25mm thickin riser of steps, skirting, dado and pillar laid over cementscreed and jointed with including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 53 | M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 54 | S&F Powder coated Aluminium frame for doors, windows, ventilators with or more rebates incl. jointing cleat for fixing etc complete all as specified and directed. |
| 55 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and directed. |
| 56 | M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed. |
| 57 | M & Lfor preparation of old decoratedsurface on walls and applying twocoat of acrylic weather proof paint (Exterior grade) over a coat of primercomplete all as specified and directed. |
| 58 | M & Lexisting treatment on old walls and applying twocoat of distemper oil emulsion complete all as specified and directed. |
| 59 | M&LSurface Preparation of wallmust be thoroughly cleaned, free of dust, grease etc and washed well with water. The surface to be checked for cracks, hollowness and loose plastered areas etc if any. All loose plaster and cracks larger than 10 mm width to be repaired with polymer modified mortar using Dr. Fixit Pidicrete URP. The cracks up to 5 mm to be treated with Dr. Fixit Crack-X Paste and the larger ones up to 10 mm with Dr. Fixit Crack-X Shrinkfree. andprimingAfter the proper surface preparation and curing of repaired areas wash the surface well and maintaining it in saturated surface dry condition proceed for priming using Dr. Fixit Primeseal diluted in 2:1 ratio with water(2 parts Primeseal diluted with 1 part water). Maintain the spreading rate of 8-10 sq mtr per litre for a single coat application to achieve about 20 – 25 microns DFT. Allow it to dry for 6-8 hrs and coating Brush apply one coats of Dr. Fixit Raincoat Waterproof Coating without any dilution Maintain the spreading rate of 3.5-4.0 sq mtr per litre / coat application to achieve about 120-130 microns DFT. The second coat of Dr. Fixit Raincoat Classic Topcoat to be apply with interval of 6-8 hours without any dilution. Maintain the spreading rate of 7-8 sq mtr per litre / coat application to achieve about 50-60 microns DFT. |
| 60 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 61 | Supply and Fix in repairs, seamless ceiling with using 12mm thick, factory made gypsum fiber board, fixed on GI frame work for seamless ceiling suitable for suspended system with and including applying two coats of oil bound distemper over a coat of primer to give even and smooth finish without showing any joints complete all as specified and directed. |
| 62 | S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified and directed. |
| 63 | S&F Single Piece WC with PP Close Seat cover Hinges Dual Flush Cistern Fitting Fixing Accessories And Accessories set size 360x640x685 mm S Trap 110mmas approved and directed.(Make : Jaquar/Kohler/ Cera) |
| 64 | S&F in repair vitreous chinaCounter/ Table top Wash hand basin (White) of size (570x420x195 mm) mm complete all as specified. (Cat No. FLS-WHT-5601) Make: Jaquar/Equivalent |
| 65 | S&F Exposed Part Kit of Single Lever Basin Mixer Wall Mounted chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout 15 mm nominal bore complete all as specified and directed.(Cat No.ARI-CHR-39233NK) Make: Jaquar/Equivalent |
| 66 | S&F stainless steel health faucet witrh 1 Mtr tube and hoock complete all as specified and directed.Confirming to Cat part No ALD573 of jaguar/PRAYAG complete all as specified and directed. |
| 67 | S&F PVC connections 15 mm dia and 450 mm long with brass nutscomplete all as specified and directed. |
| 68 | S&F brass Handle fabricated type polished of Size 100 mm complete all as specified and directed. |
| 69 | S&F brass Handle fabricated type polished of Size 75 mm complete all as specified and directed. |
| 70 | S & F ofCorner Glass Shelf (with Bracket) CAT NOACN-1173 JAGUAR or equivalent incl all fittings and accessories all as spd and directed. |
| 71 | S&F Soap dish ofchromium plated or stainless steel fixed to wall with chromium plated brass screws complete all as specified and directed. |
| 72 | S&F in repair Toilet paper holder with flat recessedtype stainless steel complete all as specified and directed. |
| 73 | S&F insmart Mirror750 mm Dia glass thickness 5mm thick light changing mode warm light cool white natureal white complete all as specified and as directed andapproved by GE. |
| 74 | Excavation in trenches n.exc. 1.5m wide and n.exc 1.5 min depth for foundation forlaying /taking down sewage / water supply lines , forming bottom surfaces to required slpoe & gradient and n.exc 10sqm on plan and n \"exc 1.5 m in depth and getting out in any type of soilcomplete all as specified and directed. |
| 75 | S&F in repair towelrack stainless steel 600 mm long shelf with lower hangerscomplete all as specified and as directed andapproved by GE. |
| 76 | Peparation of newplastered or unplastered surfaces of walls and applying two coats of cement base paintwhite or tinted, complete all as specified and directed. |
| 77 | S&F for 150mm size aluminium anodised, barrel tower bolts,of extruded section and fixed complete all as specified and directed. |
| 78 | S&F for 150mm size Handles extruded aluminium alloy handles,fabricated type anodised complete all as specified and directed. |
| 79 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 80 | M&L for 18/19 mm thickPrelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cub board shutters/selves and the like, etc complete all as specified and directed. |
| 81 | S&F for 75 mm hasp and staple, safty type, aluminium anodised with mild steel hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 82 | S&F for 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast-aluminium alloy and fixed. |
| 83 | Demolition of cement concrete of any description and in any position (reinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed. |
| 84 | M&L Virified Ceramic tiles light shade 8-9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm, in floors etc. set and jointed in neatcement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 85 | All as per item above but skirting includig 10 mm thick renderingin CM 1:3 complete all as specified & directed. |
| 86 | Demolition of precast concrete block walling and similar items i.e.. ashlar facing dressed stone work, precast concrete articles etc., of any description and in any position, built in cement mortar, including all quoins, arches and pillars etc.complete all as specified and directed. |
| 87 | M&L for 15 mm thick rendering on block/brick masonary wall surfaces in CM 1:4finished fair and even all as specified and as directed. |
| 88 | M&Lfor rendering 10 mm thickin CM (1:6) on fair faces of brick/block work or concrete surfaces/stone masonryand finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 89 | M & L for preparation of old/new surfaces of wall and applying two coat of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed. |
| 90 | M&l for preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces all as directed. |
| 91 | Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed. |
| 92 | M&L forPCC (1:3:6) type C2, (using40mm graded stone aggregate) as in plinth protection, 75 mm thick, finishing the surface even and smooth w/o using extra cementcomplete all as specified and directed. |
| 93 | Taking down chowkat or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame and removing to store complete all as specified and directed. |
| 94 | S & FPowder coatedAluminium alloy sections sliding windows with frames Series-C (20mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips,shutters with tinted glass 5mm thick and stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. |
| 95 | M&L for Mild steel square or round bars welded to steel windows or ventilators as in guard bars framed or unframed complete all as specified & directed. Note :- Guard bars shall be factory welded & given one shop coat of red oxide or zinc chromate primer. Cost of factory welding & Shop coat of primer is deemed to be included in quoted rates. |
| 96 | M&L for 18-20mm thick Granite (of any type)work (table rubbed and polished) in cooking platform, Jambs cill and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including rounding of exposed edges of slab smoothly and polished complete all as specified and directed. |
| 97 | Supply and fixing in repairsdecorative type curtain rod stainless steel finishofpipe 22 to 25 mm dia as per sample approved by GE complete all as specified & directed. |
| 98 | Supply and fixing of purpose made brackets trade pattern for decorative type curtain rods suitable for holding 22 to 25 mm dia as per sample approved by GE complete all as specified & directed. |
| 99 | Supply and fixing in repair of decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25 mm dia curtain rods as per sample approved by GE\"s complete all as specified & directed. |
| 100 | M&L 75 mm thick PCC 1:3:6 type D-2 (using 40mm graded stone aggregate) as in as in sub baseall as specified and directed. |
| 101 | M&L providing precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape as approved. |
| 102 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying if inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed. |
| 103 | S&F Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel, flat or MS hollow square/ rectangular any type, size/ sections), includingdistance pieces, cleats etc conforming toFE- 290 (Gde-E- 165), including fabrication, erraction and fixing complete all as specified. |
| 104 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified. |
| 105 | S&F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws etc; complete all as specified and as directed. |
| 106 | S&F anodised aluminium snap grid frame work of pre powder coated pre fabricated GI section (Including hangers) for false ceiling of size 600x600mm with ceiling board of PVC laminated gypsum board 7-8 mm thick and fixed as per manufacturer instruction as per sample approved by GE , including dismantling of old wall and ceiling board (fibre, pulp, insulation, etc) or insulation board/slabs /blankets of any thickness including cover fillets complete all as specified & directed. |
| 107 | S & F for anodised Aluminium partition/ door frame of size 100 x44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98mm thick, bottom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 x 44 x1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittingsor hinges 100mm size with hydrolic door closer, handles \"D\" type 125mm, floor door stopper, tower bolts 200mm, sliding door bolt 300mm or mortice lock with 5mm thick tinted glass /pre laminted particle board (Novapan) panel and making good to the disturbed wall surfaces to match existing surface complete all as specified and directed. |
| 108 | Dismantaling and taking down copper / aluminium point wiringany type / size complete with removing all connection and accessories such asswitches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of fitting , batten , steel or PVC conduit , casing caping etc compele and making good the disturbed surface. |
| 109 | Taking down old and unserviceable sub main wiring any size / type / core incl earth wire complete with batten/conduit etc and making good the disturbed surface to match the existing disturbed surface all as directed. |
| 110 | Taking down old and unsrevicablesheet metal enclosure , switch fuse unit , distribution bord any type /way / capacity including fuses,MCB\"s , insulator etc complete after removing all connection and making good the disturbed surface all as directed. |
| 111 | M&L for Point wiring complete with FRLS PVC insulated unsheathed , 1100 V grade conforming to IS 694 ,1.5 Sqmm (Norminal area) multistranded ,copper conductor cable drawn through in non metallic rigid PVC conceled/surfaceconduit medium grade ,minimum 20 mm dia, ISI Marked,with sutaible size of 1 to 8 module metal flush boxes and back plate for mounting of modular switches/socket and regulators and including modular fornt plate with all acessories complete . |
| 112 | (a)One light point controlled by one way one switch SP 5 Amps ,240 V. |
| 113 | (b)One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V. |
| 114 | (c)One switch socket outlet 3 Pin, 5 Amps, SP on independent board. |
| 115 | (d)One switch socket outlet 3 Pin, 5 Amps, SP on sameboard. |
| 116 | All as per the above item No 111 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet. |
| 117 | S&F modular switch one way 6 Amps , 1 module type complete all as specified and directed. |
| 118 | S& f modular socket , 6 Amps , 2/3 pin combined 2 module complete all as specified and directed. |
| 119 | S& f modularswitch socket combination, 6 Amps / 16 Amps , 2/3 pin combined 2 module complete all as specified and directed. |
| 120 | S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified and directed. |
| 121 | Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting uptoPVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirementand 2 Nos ofround or square PVC bolck for fixing of FTL fitting complete all as per directed. |
| 122 | Supply and fixing ofmirror light of capacity 1x10 Watt epoxy white powder coated CRCA sheet steel housing with acrylic diffuser gaskat with all fixing acessories complete all as specified and directed. |
| 123 | Supply & fixing modular fan regulatorstep type , 2 module complete all as specified and directed. |
| 124 | M&L for sub main wiring with two runs of 6 Sqmm (2x6 sqmm )1100 volts grade single core FR PVC insulated unsheathed multistranded copper conductorcableconfirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in walls/roofs/floors etc with one run of 4 Sqmm (1x4 sqmm )single core FR PVC insulated unsheathed copper conductor cableas earth wire complete all as specified and directed.Note:- 2 runs of 6 Sqmm ,one run of 4 Sqmm( 2x6 sqmm + 1x4 sqmm ) cable and one meter of conduit will be measured as one unit again. |
| 125 | S&F sheet metal enclosures fordistribution board when MCB to be used SPN ( Single pole and neutral ) 8 way, 240 Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door typecomplete all as specified and directed. |
| 126 | S&F sheet metal enclosures fordistribution board when MCB to be used TPN ( Triple pole and neutral ) 4 way, 415Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door typecomplete all as specified and directed. |
| 127 | S&F MCB TPN 40 Amps,415 Volts, rupturing capacity 10 KA.\"C\" Series complete all as specified and directed. |
| 128 | S&F MCB SPN,40 Amps, 240 Volts, rupturing capacity 10 KA.\"C\" Seriescomplete all as specified and directed. |
| 129 | S&F MCB SP, 5 to 32Amps, 240 Volts, rupturing capacity 10 KA \"C\" Series complete all as specified and directed. |
| 130 | M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nutsall shown in electrical plate No.5 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed.Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnelwith watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II.(ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule.(iii)Earthing shall be tested as specified incasul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (iv) On teting after complataion of earthing,if the desired earth resistance is not obatined the earthing wiil be re done by thecontractor at his on risk and cost to the entire satisfaction of the Engr - in - charge. |
| 131 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 132 | Taking up U/S AC/GI/DI/UPVC water main (incl all fitting) with spigot & socket /MS pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe of 100 mm bore for laying /rerouting of serviceable pipe after cleaning complete all as directed. |
| 133 | All as per item 128 above but 50 mm dia bore |
| 134 | All as per item 128 above but 25 mm dia bore |
| 135 | All as per item 128 above but 20 mm dia bore |
| 136 | Material and labour DI pipes of size 100 mm bore with spigot and socket end centrifugally cast class \"K- 7\" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as directed.(make- kejriwal casting/ kesoram/electro steel). Note: DI fitting /lead joint / Tyton joint will be measured and paid seperately all the dismanted / demolished /taking down material shall be reused or removed from site. |
| 137 | Supply and Fixing in any length UPVC pipe 50 mm dia pipe manufactured as per ASTM-D-1785 as per IS-559, Schedule-40 complete with fittings, laid in trenches in required length complete all as specified and directed |
| 138 | All as per item No. 133 here in above but size (25 mm dia). |
| 139 | All as per item No. 133 here in above but size (20 mm dia). |
| 140 | M&L DI bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of the following size 80 to 200 mm dia complete all as specified ( lead /gasket for fitting shall be measured and paid separately) |
| 141 | S & Fin repair UPVC Ball valves with operating handle (stop valve) of size 50 mm dia complete suitable for fittings with ASTM - 1785, Schedule 40 UPVC pipes all as specified and as directed. |
| 142 | All as per item No. 137 here in above but of size (25 mm dia). |
| 143 | All as per item No. 137 here in above but of size (20 mm dia). |
| 144 | Excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed. |
| 145 | Rentring filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed. |
| 146 | Removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 147 | M&L for hard standing cutting/road cutting for laying of pipe and making surface good with PCC 1:3:6 complete all as specified and directed. |
| 148 | Taking down carefully cast iron sluice valve of size 80 mm to 200 mm bore from CI water mains, complete with all acessories all as specified and as directed. |
| 149 | S&F in repairsluice valves flanged end, cast iron body, flanged and drilled and non rising type stainless steel spindlewith nut, long body, class P N 1.6, conforing to IS 14846 of 2000 for following sizesincluding all flange joint with rubber or fiber board, bolts, nuts and washers complete including pumping out accumulated water all as specified and directed of following size. |
| 150 | (a)100 mm bore |
| 151 | M & L for Cutting existing cast iron pipes and reducing for insertion of CI fittings to required length in position for followingsizes :- |
| 152 | (a)150 mm bore |
| 153 | (b)100 mm bore |
| 154 | M&L for Construction of brick Masonary valve chamber of size 900 X900 X 900 mm (Internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick 150 mm wide off sets alround over 100 mm thick hard core , one brick thick walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in CM (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/Dense soil 3 mm thick MS sheet cover fixed on 50 mm X 50 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coaping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed |
| 155 | Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 25 sqmm 4 core complete all as specified and directed. |
| 156 | Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete all as specified and directed. |
| 157 | M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified and directed. |
| 158 | Supplying and laying un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm complete. Complete all as specified and directed. |
| 159 | Supply and laying GI tube light grade 50 mm bore complete. Complete all as specified and directed. |
| 160 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 161 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light,6000Kcomplete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core 0.5 sqmm flexible copper conductor cases of suitable size complete all as specified and directed. |
| 162 | NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor. |
