|
| 1 | Dismantling structuralsteel workincluding doors, gates but excluding framed truss etc specifically provided for complete all as specified and as directed. |
| 2 | S&F of Framed work Fe-410W(GdeE-250) qualityB as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed |
| 3 | S&F of Mild steel, plain, black sheet of thickness 1.00mm in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed |
| 4 | S&F of Butthinges of size 125mm , heavy weight, cold rolled mild steel, and fixed and complete all as specified and directed |
| 5 | M&L two coats of synthetic enamel painting over a Priming coat of Red oxide Zinc chrome on New steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces. |
| 6 | S&F Mild steel sliding door bolts 300mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as directed |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises |
| 8 | Taking down cement plaster on brick or stone or concrete surfaces of walls/ceilings etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed. |
| 9 | M&L for brick work with sub class \"B\" brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and as directed |
| 10 | M&L for 75mm thick PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in sub base of flooring etc complete all as specified and as directed |
| 11 | M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 12 | M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete ceiling surfaces etc complete all as specified and as directed |
| 13 | M&L for Glazed ceramic ware colouredprinted tiles 300x 450 x 6 to 8 mm thick in dado, set and jointed in neat cement slurry and pointed in colour cement to matchthe surface laid over andincluding 12 mm thick rendring in CM 1:4 on any faces of brick work for fixing wall tilesover and including bedding layer of cement mortar . |
| 14 | M&L for Non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size 300mmx300 mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed. |
| 15 | M&L for Vitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, dado , skirtingetc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition and rubbish off the primises etc complete all as speciefied and directed. |
| 16 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing .(Note : Colour & Pattern as approved by Engr-in-Charge) |
| 17 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 18 | M&L new plastered or unplastered surfaces of walls/ceiling by applying 2mm thick birla white cement wall care putty to get smooth & levelled surface for applying next treatment complete all as specified and directed by Engineer-in-Charge |
| 19 | M&L for applying two coats of distemper oil emulsion , white or tinted over a coat of primer on wall/ceilings complete all as specified and directed by Engineer-in-Charge |
| 20 | M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed |
| 21 | Taking up or down old/ unsv Steel Tubing 15/20mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections complete all as specified and as directed. |
| 22 | S&F 15mm bore Steel water tubing \"medium grade\", galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. |
| 23 | S&F 20mm bore Steel water tubing \"medium grade\", galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. |
| 24 | S&F 75 mm bore outlet cast floor/nahani trap with 100mm size stainless steel gratings including jointing to waste pipe fixed in cement concrete type (B-1) 1:2:4 etc complete all as specified and directed by Engineer-in Charge |
| 25 | S&F Vitreous China wash down water closet EWC/IWC white as approved includingall accessories like seat cover, CP Health faucet and CP jet complete all as specified and as directed |
| 26 | S&F wash hand basin vitreous china white glazed oval type on RCC conter including,CP waste coupling and waste pipe brackets and cutting on granite top for and pinning in ends of brackets and etc complete in all respect complete all as specified and directed by Engineer-in-Charge. |
| 27 | S & F bib tap chromium plated fancy type cast copper alloy screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 28 | S & F in repairstop cosk/angle valve chromium plated fancy type cast copper alloy screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 29 | S & F toilet paper holder complete all as specified and directed by Engineer-in-Charge. |
| 30 | S & F Aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F in repair PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts and washers etc complete all as specified and directed by Engineer-in-Charge. |
| 32 | S & F in reapirover head shower with shower arms as approved complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&F in repair Health Faucet with Wall Hook, Chromium Plated having 1.00 Metre long with PVC Hose Pipe and fixed in repairs, complete all as specified and as directed. |
| 34 | S & F in repair soap dish holder complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F in repair6 mm plain Mirror bevelled edge of selected quality glass, fixed with steel studs complete all as specified and directed |
| 36 | Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames)incl cutting of frame with cutter and make good of disturb surface complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F solid PVC doorframe of size 50mm x 47mm made out of5 mm PVC sheet reinforced with MS Squre Tube in opening etc PVC sheet should be wood grain printed/plain as approved by Engr-in-charge complete all as specified and as directed. |
| 38 | S&F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement including rawl plugs etc in the frame at site as per specification & drawing etc complete all as specified as directed. |
| 39 | S & F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge. |
| 40 | S & F extruded aluminum alloy handles fabricated type and anodised of size 150mm complete all as specified and directed by Engineer-in-Charge. |
| 41 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 42 | S & F 10 litres capacity, PVC valve less, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and as directed. |
