|
| 1 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 2 | 20 mm Dia |
| 3 | 25 mm Dia |
| 4 | Supplying and drawing following sizes of FRLSH/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 5 | 3 x 1.5 sqmm |
| 6 | 4 x 1.5 sqmm |
| 7 | 5 x 1.5 sqmm |
| 8 | 6 x 1.5 sqmm |
| 9 | 7x 1.5 sqmm |
| 10 | 3 x 2.5 sqmm |
| 11 | 6 x 2.5 sqmm |
| 12 | 3 x 4.0 sqmm |
| 13 | 6 x 4.0 sqmm |
| 14 | Supplying and fixing metal box of size 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing, fixing andpainting etc. as required |
| 15 | Supplying and fixing 5/6 Amp piano type switch on the existing switch box / cover including connections etc. as required. |
| 16 | Supplying and fixing of 300 mm x 300 mm size metalic frame cover fabricated with 25 mm x 25 mm x 3 mm thick angle iron welded construction frame structured and 1.6 mm thick M. S. sheet cover plate with double hinges and knob type locking arrangement including painting, making recess in wall, masonary, plastering & finishing the good (As per drawing) |
| 17 | Supplying and fixing of 8 way, Double Door single pole and neutral, sheet steel, MCB Distribution Board,240V, on surface/recess, complete with tinned copper bus bar, neutral bus bar,earth bar, din bar, interconnection, powder painted including earthing etc as required (But without MCB/RCCB/Isolator) |
| 18 | Supplying and fixing of 4 way (4 + 12),horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, completed with tinned copper bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required (But without MCB/RCCB/Isolator) |
| 19 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of Following pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 20 | Single Pole |
| 21 | Double Pole |
| 22 | Supplying and fixing 63 A rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 23 | Supplying and fixingfollowing pole , Residual current circuit breaker (RCCB) having a sensitive current 30 mAin the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 24 | 25 A, Double Pole,240 V |
| 25 | Supplying & Fixing 6 Way busbar chamber of size not less than 500 X 400 X 200 fabricated using 1.6 mm sheet steel (CRCA) and epoxy powder coating, provided with 2 hinges door that opens horizontally along with lock & key arrangement, 4 nos. of bus bar sections made of copper, provided with clamping arrangementfor mounting on pole as required. |
| 26 | Providing and fixing 100 A rating, 30KA breaking capacity and 4-pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required |
| 27 | Supplying, Installation, Testing and commissioning of 70 watt LED high efficacy Wellglass advanced design luminaires suitable for industrial use, housing made of pressure die cast aluminium powder coated with ingress protection of IP66, consumes lesser energy and maintain high lighting levels with 1no. eyebolt provided for mounting purpose on godown truss/wall along with all accessories such as clamp, nuts, bolts,etc as required and completed in all respect.System efficacy.>=110LPW . Operating voltage voltage : 140 V-270 V , rated voltage and frequesncy-240 V , 50 Hz ,Lighting Color- Cool daylight(6500-7500K)with 5 years manufacturing warranty.(NABL certified as per ISO/IEC specification) |
| 28 | Supplying, Installation, Testing and commissioning of 40 watt LED high efficacy Wellglass advanced design luminaires suitable for industrial use, housing made of pressure die cast aluminium powder coated with ingress protection of IP66, consumes lesser energy and maintain high lighting levels with 1no. eyebolt provided for mounting purpose on godown truss/wall along with all accessories such as clamp, nuts, bolts,etc as required and completed in all respect.System efficacy.>=110LPW . Operating voltage voltage : 140 V-270 V , rated voltage and frequesncy-240 V , 50 Hz ,Lighting Color- Cool daylight(6500-7500K)with 5 years manufacturing warranty.(NABL certified as per ISO/IEC specification) |
| 29 | Supplying, Installation, Testing and commissioning of Surface waterproof industrial luminaire with polycarbonate housing and diffuser suitable for twin 4ft T8 tubehaving ingress protection of IP66 along with 2 Nos of 20 Watt LED polycarbonate T8 tube with in build driver with metal heat sink and Installation, System efficacy.>=110LPW, THD<10%, Operating voltage voltage : 140 V-270 V , rated voltage and frequesncy-240 V , 50 Hz ,Lighting Color- Cool daylight(6500-7500K)with 5 years manufacturing warranty (NABL certified as per ISO/IEC specification), testing and commissioning of pre-wired, LED fitting, complete with all accessories and tube/lamp etc. directly on ceiling/ wall completed in all respect etc.as required. |
| 30 | Supplying,Installation,Testing&Commissioning ofFloodLight, powdercoatedpressuredie cast aluminiumbody withbuilt in or separate driver as per the requirement with Driver efficiency >85%, Input voltage:Input voltage:140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95,IP-66,IK-10,CRI >70,undervoltageandovervoltageprotection, EMI-EMCasper CISPR -15,lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained tilllife ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K/ 5700°K/6500°K(AsperANSIBin),SDCM(Standard Deviation Color Matching) <5, Maximumpowerconsumptionshouldnotmore than the specified rating and Fixture shall be of relevant BIS standardcompleteinallrespecti/c external connectionswith1.5sqmm FRLS/HFFR,PVCinsulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report andalltestingrequiredforLED fixtures as per BISshall be submitted.. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermalmanagement: heatsinkofaluminiumhousing such that LED junction temperature shall not rise above 90°C). |
| 31 | 100 W |
| 32 | 200 W |
| 33 | Supplying,installation,Testing&CommissioningofStreetlightLEDfixture powdercoatedpressurediecastaluminiumbody withdriver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5KVL,N,EasperIEC61000-4-5, Driverefficiency >85%,THD< 10%asperIEC61000-3-2,P. F.≥0.95,IP-66,IK-10,CRI>70,undervoltageandovervoltageprotection,EMI EMCAsper CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry)ofminimum 50000BurningHourswith70%ofinitial Lumenmaintained tilllife ends as per LM80 extrapolation IES TM-21-11 report,CCT 3000°K / 4000°K / 5700°K/6500°K(Asper ANSIBin),SDCM (Standard Deviation Colour Matching) <5,Maximumpowerconsumption should not more than the specified rating and Fixture shall be of relevant BIS standardcomplete inallrespecti/cexternal connectionswith1.5sq.mmFRLS/HFFR,PVCinsulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120lm/Watt output .LM79 & LM80 Test report andalltesting requiredforLED fixtures as per BISshall be submitted.Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermalmanagement:heatsinkof aluminiumhousing such that LED junction temperature shall not rise above 90°C). |
| 34 | 45 W |
| 35 | Supplying and fixing of out door type loop in loop out cable junction box (20cmx15cmX10cm)fabricated from 1.6 mm MS sheet enclosed wheather proof, dust proof, water proof and locking arrangement internally embedded gasket with bottom cable entry plat through cable glands fixed with clamps on steel structure and wall. Seperate for incoming and out goingcables and wires duly fitted with following in it.HD Connector for 10 to 16 sqmm-4 Nos.fixing Clamps-2 Nos. |
| 36 | Supplying of XLPE insulated & PVC tape innersheathed aluminium conductor armoured cable of 1.1 KV grade of following size confirming to IS:7098 (Part- I) 1988 with up to date ammendment as required. |
| 37 | 2 X 10 sq. mm |
| 38 | 4 X 10 sq. mm |
| 39 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following on wall surface etc as required. |
| 40 | Upto 35 sq mm |
| 41 | Supplying & Making end termination with brass compression gland and aluminium lugs for following size of PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required |
| 42 | 2 X 10 sq. mm |
| 43 | 4 X 10 sq. mm |
| 44 | Supplying and fixing of 600 mm x 600 mm size metalic frame cover fabricated with 3 mm thick M. S. sheet cover plate with double hinges and knobe type locking arrangement including painting, making recess in wall, masonary, plastering & finishing the good (As per drawing) |
| 45 | Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet ,with 4 pole and earth, metal enclosed plug top alongwith 30 A \"C\" curve, TPMCB, in sheet steel enclosure, on surface or in recess ,with chained metal coverfor the socket outletand complete with connections , testing and comissioning etc as required. |
| 46 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 47 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 48 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 49 | Supply, Installation, Testing and Commissioning of 3 Phase single stage open well monoblock pump with power rating 3 HP at 2800 RPM, suction dia 50mm and delivery dia 40 mm, stainless steel Shaft material, cast iron housing and other accessories as required.HP: 3Outlet size: 50 mm Voltage: 380 V , 3 Ph, 50 Hz Av SupplyNumber of stages: 1Starting Method: DOLDischarge Min: 24.7 LPSDischarge Max: 37 LPS |
| 50 | Supply, Installation, Testing and Commissioning of 5 Phase single stage open well monoblock pump with power rating 5 HP at 2800 RPM, suction dia 50mm and delivery dia 40 mm, stainless steel Shaft material, cast iron housing and other accessories as required.HP: 5Outlet size: 50 mm Voltage: 380 V , 3 Ph, 50 Hz Av SupplyStarting Method: DOLDischarge Min: 30 LPSDischarge Max: 50 LPS |
| 51 | Supplying, installing, testing and commissioning of sheet steel fabricated pump control panel suitable for 3 HP motor, complete with suitably rated contactor, thermal overload relay, short-circuit protection, Single Phasing Preventer (SPP) with Auto/Manual selector, FRLS internal copper wiring, combined voltmeter/ammeter with selector switch, ON/OFF indicating lamps, enclosed in powder-coated enclosure with minimum protection IP-54, conforming to IS/IEC 60947-4-1, including all accessories, earthing, fixing, testing and commissioning complete, as per specifications and directions of Engineer-in-Charge. |
| 52 | Supplying, installing, testing and commissioning of sheet steel fabricated pump control panel suitable for 5 HP motor, complete with suitably rated contactor, thermal overload relay, short-circuit protection, Single Phasing Preventer (SPP) with Auto/Manual selector, FRLS internal copper wiring, combined voltmeter/ammeter with selector switch, ON/OFF indicating lamps, enclosed in powder-coated enclosure with minimum protection IP-54, conforming to IS/IEC 60947-4-1, including all accessories, earthing, fixing, testing and commissioning complete, as per specifications and directions of Engineer-in-Charge. |
| 53 | The items are to be dismentalled where the work has to be executed and take away by the giving the credit to the work estimate. |
| 54 | Old rusted conduits, loop boxes, MCB DBs, MS clamp and other Iron material etc |
| 55 | Old Well Glass light fixtures. |
| 56 | Old broken Auminumcables. |
| 57 | Old Pump 3 HP Capacity |
| 58 | Old Pump 5 HP Capacity |
