Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removing unserviceable tiles complete all as specified and directed. |
| 2 | M&L for glazed ceramic coloured tiles of size 350x250x7mm/450x350x7mm thickset and jointed in neat cement slurry and pointedto white cement to match on the wall over 10 mm thick 1:4 screed bed etc complete all as specied and directed. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | M&L for cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed. |
| 5 | M&L for cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate in floors, 25mm thick, complete all as specified and directed. |
| 6 | M&L for 7-8 mm thick, jointless, coloured non skid ceramic tiles (square/rectangular) area exc 0.18 Sqm but not exc 0.38 Sqm in floor, set & jointed in neat cement slurry and pointed in white or colured cement to match over 15mm thick screed bed in cement morta 1:6 complete all as specified and directed. |
| 7 | M&L for 7-8 mm thick, jointless, coloured non skid ceramic tiles (square/rectangular) area exc 0.11 Sqm but not exc 0.18 Sqm in floor, set & jointed in neat cement slurry and pointed in white or colured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 8 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry or laid dry and pointed complete complete all as specified and directed. |
| 9 | M&L for granite (of any type) tiles 16 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 10 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 11 | M&L for machine cut Kota stone slab flooring 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 12 | M&L for machine cut Kota stone slab flooring 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 13 | Taking down chowkats or frames without taking off shutter from the frame (wooden/aluminium) exc 1.50 Sqm not exc 4.0 Sqm each complete all as specified and directed. |
| 14 | S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 15 | S&F flush shutters 30mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed. |
| 16 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 17 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed. |
| 18 | M&L anodised aluminium doors (sliding/hanging type) with frame size 101.60 x 44.45 x 2.00 mm thick and shutter aluminium anodised and top rail 47.62 x 44.45 x 1.50 mm and style 47.5 x 44.5 x1.5 mm, lock rail 83.50 x 44.45 x 1.50mm and bottom rail 150.00 x 44.50 x 2.50 mm and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos, aluminium handles 150mm 02 Nos, aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing, anodised aluminium shape beading, screws etc with paneling in two parts with 12mm thick prelaminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed. |
| 19 | Taking down chowkats or frames without taking off shutter from the frame (wooden/aluminium) not exc 4.0 Sqm each complete all as specified and directed. |
| 20 | M&L powder coated anodised aluminium (sliding/hanging type) windows / ventilator with three track bottom track size 92 x 29.5 x 1.5 mm thick, side & top track frame size92 x 29.5 x 1.5 mm thickand shutter aluminium anodised 39 x 20 x 1.5 mm thick incl necessary aluminium fittings like jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted/plain glass inpanels and stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm incl all fittings & fixture complete all as specified and directed. |
| 21 | M&L for anodised aluminium powder coated window and ventilator shutters alongwith frame, glass and wire mesh as directed, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap eading, screws etc. complete all as specified |
| 22 | S&F 100 mm long MS butt hinges medium weight complete all as specified and directed. |
| 23 | S&F 125 mmaluminum anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 24 | S&F Aluminium handles, cast type anodised, 150 mm size complete all as specified and directed. |
| 25 | S&Fdoor closer hydraulically regulated,aluminium (extruded section) body, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 26 | S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of complete all as specified and directed. |
| 27 | S&F in repair steel rolling shutters of 1.25 mm thick lath, without ball bearing, including top cover, anchoring rod, hasp & staple and one shop coat of primer; erected in position as indicated, push pull or manual type complete all as specified and directed. |
| 28 | S&F in repair 18mm thick prelaminated HDHMR (High Density Moisture Resistance) board of grade1 quality, with one side wide and other side coloured as approved, as in cupboard, shleves, drawer etc. including necessary fittings such as piano hinges, SS L/Z hinges, magnetic catchers, knobs etc. complete all as specified and directed. |
| 29 | S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers, etc. of anodised aluminium alloy complete all as specified ande directed. |
| 30 | S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets including new brackets and making good complete all as specified and directed. |
| 31 | S&F in repair vitreous china wash down water closet pan with P or S trap, pedestal pattern, white (including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device) complete all as specified and directed. |
| 32 | S&F in repair PVC connection 600 mm long with brass unions at both ends, suitable for 15 mm bore pipe, complete all as specified and directed. |
| 33 | S&F in repairs CP brass hot & cold mixer with legs non telephonic fixed in wall for bathroom complete all as specified and directed. |
| 34 | S&F in repair brass chromium plated shower rose 65 to 90 mm size with swivel joints, fixed in repairs complete all as specified and directed. |
| 35 | S&F in repair 600 mm long tubular towel rail 20mm dia of brass, chromium plated complete. |
| 36 | S&F in repair soap dish, vitreous china white, approximate size 160 x 160 x 90 mm, fixed to plugs with Chromium plated brass screws complete all as specified and directed. |
| 37 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 38 | S&F in repair fancy type CP bib cock long body 15mm bore with wall flange alloy with crutch handle screwed down for iron pipe chromium plated fixed in 15mm bore pipe complete all as specified and directed. |
| 39 | S& F in repair 15mm dia CP pillar taps, fency type, with capstan heads, screwed down high pressure with long screwed shankand fly nuts, screwed for iron pipe complete all as specified and directed. |
| 40 | S& F in repair brass chromium plated angle cock of 15mm bore, screwed for iron pipe complete all as specified and directed. |
| 41 | S&F in repairstop valve brass chromium plated fancy type 15mm bore with wall flange of authentic single leverfor iron pipe or for unions complete all as specified and directed. |
| 42 | S&F in repair Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified and directed. |
| 43 | S&F in repairs 600x450 mm bevelled edge looking mirror 5.5mm thick of selected quality glass, mounted on fiber base 10 mm thick chromium plated brass screws & cup washers etc complete all as spicified & directed. |
| 44 | S&F in repairs PVC low level flushing cistern 10 ltrs capacity, ISI marks with complete fitting complete all as specified & directed. |
| 45 | S&F in repairssheet glass self assembly consisting of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long with CP brackets, screw etc complete all as specified & directed. |
| 46 | S&F in repair grating doom 125 mm diawith waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directede. |
| 47 | S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75 mm complete all as specified and directed. |
| 48 | S&F in repair toilet paper holder with flat recessed type stainless steel of mild steel chromium plated with chromium plated brass screws complete all as specified and directed. |
| 49 | Dismantling water tank and removing, (Capacity 500 Ltr and n. exc. 1000 Ltr)complete all as specified and directed, |
| 50 | Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing complete all as specified and directed. |
| 51 | Taking up or down steel tubing and connections 20 mm bore, including cleaning for refixing complete all as specified and directed. |
| 52 | S&F 15 mm dia GI tubing medium grade fixed in floors, walls, ceilling etc. complete all as specified and directed. |
| 53 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting exceeding 20cm girth complete all as specified and directed, |
| 54 | S&F 20 mm dia GI tubing medium grade fixed in floors, walls, ceilling etc. complete all as specified and directed. |
| 55 | S&F rotational moulded polythene water stoarage tank, cylinderical vertaical with closed top, hoisted and fixed in position, 500 Ltr capacitycomplete all as specified and directed |
| 56 | Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc including cleaning or refixing or removal to store complete all as specified and directed. |
| 57 | S&F in repair PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore complete all as specified and directed. |
| 58 | S&F in repair PVC (SWR) bends any radius, 110 mm bore, provided with access door complete all as specified and directed. |
| 59 | S&F in repair PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 75mm bore complete all as specified and directed. |
| 60 | S&F in repair PVC (SWR) bends any radius, 75 mm bore, provided with access door complete all as specified and directed. |
| 61 | S&F cast iron 100 mm pipes with spigot and socket ends, vertically cast, class A, in any length, complete all as specified and directed. |
| 62 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 63 | Dismantling of plain or corrugated steel sheeting any gauge thicknessincluding nainital or similar pattern all as specifed and directed |
| 64 | S&F rolled mild steel conforming to Gde Fe 410-0 or Fe-310-0 in joist, channel, angle or tee sections, fixed independently, without connecting plates, etc complete all as specified and directed. |
| 65 | S&F mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed. |
| 66 | S&F 4 mm dia galvanized steel wire, 50 x 50 mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed. |
| 67 | S&F rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in roof trusses (framed) and trussed purlins including distance pieces, cleats etc complete all as specified and directed. |
| 68 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 69 | M&L for preparation new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and directed. |
| 70 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed. |
| 71 | M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 72 | M&L for machine pressed precast concrete interlocking paver block, vibro compacted, rubber moulded, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. |
| 73 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 74 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick/conc surfaces of walls, finished even and fair complete all as specified and directed. |
| 75 | M&L for 15mm thick rendering on fair faces of brick or concrete surface in CM 1:4, mixed with water proffing compound as per manufacturer instruction, finished even and fair complete all as specified and directed.Note: Water Proofing Compound shall be measured and paid seperately. |
| 76 | Supply only liquid water proofing compound complete all as specified and directed. |
| 77 | M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling faces of brick work or concrete surfaces, finished fair and even complete |
| 78 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 79 | M&L for preparation of new plastered surface of wall and applying two coat oil bound distemper over a coat of primer complete all as specified and directed. |
| 80 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over & including a coat of cement wash with white cemment complete all as specified and directed. |
| 81 | M&L for two coat oil bound distemper on newly plastered surfaces on wall over a coat of primer including over and incl 1.5 mm thick wall care of putty as specified incl complete removal of existing treatment complete all as specified and directed. |
| 82 | M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed. |
| 83 | M&L for preparation of old decorated plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 84 | M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying two coat of cement paint complete all as specified and directed. |
| 85 | M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered and painted surfaces of wall complete all as specified and directed |
| 86 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 87 | M&L for preparation of old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 88 | M&L preparation of new or previously untreated surfaces of wood and wood based materials of any description not exceeding10 cm in width or girth when un-connected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed. |
| 89 | Cutting into existing manholes for connecting new drains, 150 mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed. |
| 90 | Demolition of brickwork built in cement or cement lime mortar complet all as specified and directed. |
| 91 | M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 92 | M&L for Brick work with sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 93 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 94 | M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in lintels over 1.5m clear span, beams and cantilevers complete (reinforcement to be measured separately) complete all as specified and directed. |
| 95 | Form work to sides & soffits of lintels over 1.5m clear span, floor or roof beams, cantilevers, etc for rough finished flat surfaces of concrete complete all as specified and directed. |
| 96 | Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 97 | Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 98 | M&L for chequered cement concrete tiles with grey cement and pigments 250mm x 250mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including screed bed 20mm thick in cement mortar 1.6 complete all as specified and directed. |
| 99 | M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copings, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. |
| 100 | M&L for swimming pool tiles of size 247mm x 122 mm x 8mm thick coloured for floor / wall fixed with approved adhesive epoxy based compound including all necessary fittings accessories complete (internal cove, external angle junction of three external angle, internal angle of wall - floor junction etc, fixed with using tiles adhesive compound and gap between tiles to be filled with grout as per manufacturer instructions complete all as specified and directed. |
| 101 | S&Fin repair urinal, bowl type or half stall pattern, basin only including connections to flushing pipe |
| 102 | S&F in repair Urinal partitions slabs terminating about 40cm above floor line, fixed in repairs complete all as specified |
| 103 | S&F of diving board 5mtr length and 0.50 mtr width of thickness 45-65 mm made up of fibre and have of Burma wood inside and having anti-slippery surface & fulcrum is made up of stainless steel including linear spring of the cantilever type fixed at one end at a hinge complete all as specified and directed. |
| 104 | S&F of swimming pool ladder (skimmer) width of 500mm and 42mm dia pipe, made up of stainless steel Grade-304 with 5 steps complete all as specified and directed. |
| 105 | S&F of swimming pool ladder (skimmer) width of 500mm and 42mm dia pipe, made up of stainless steel Grade-304 with 15 steps complete all as specified and directed. |
| 106 | S&F of swimming pool Fulcrum roller screw, made up of stainless steel Grade-304complete all as specified and directed. |
| 107 | S&F of swimming pool grab rails 38mm dia with bracket, made up of stainless steel Grade-304complete all as specified and directed. |
| 108 | M & L for non skid coloured ceramic outdoor tiles 10 mm thick jointless (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 109 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 110 | Material and labourfor point wiring with two single core 1.5 sqmm cable (nominal area) stranded FRLS copper conductor, PVC insulated unsheathed cable , 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box, 1.6 mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed for following :- |
| 111 | One light, fan, bell point controlled by one switch. |
| 112 | One 3 pin switch socket outlet point 5 Amps on independent board. |
| 113 | One 3 pin switch socket outlet point 5 Amps on same board with other switch. |
| 114 | All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size. |
| 115 | M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed. |
| 116 | M&L for Modular socket outlet 2/3 pin combined 2 module, 6 Amps, 230 Volts AC circuit complete all as specified. |
| 117 | M&L for Modular socket outlet 2 in 1, 6 pins 6A and 16A, combined 2 module, complete all as specified and directed. |
| 118 | M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete as specified and directed. |
| 119 | S & Fixceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed. |
| 120 | Taking down old and u/s light fittings conventional type from wall surface / ceilling or any position and making good the disturbed surfaces all as specified and directed. |
| 121 | Supply and fixing in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 122 | Supply and fix in replacement of exhaust fan made of steel body complete with louvers shutters, 450 mm sweep, single phase, 230 Volts AC, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing andincluding writing MES No complete all as specified and directed.Note: Old unserviceable pumps to be deposited in AGE E/ M store |
| 123 | Supply and fixing wall mounting fan ofsingle phase 230/240V of size 400 mm sweep andgrouting withnut, bolts & Fastenaron the wall and make good the disturbed surface complete all as specified and directed.Note: Old unserviceable pumps to be deposited in AGE E/ M store |
| 124 | Supply and fixing in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor complete all as specified and directed.U:Old unserviceable pumps to be deposited in AGE E/ M store |
| 125 | Supply & fix in replacement of MCB DB VTPN 4 ways, with metal double door, IP -43 protection suitable for MCCB as incommer and MCB as out going, VTPN DB\"s 415 volt 3 phase complete with appropriate size copper bus bar and neutral link of complete with one MCB TPN, 415 volts 40 amps 25 KA (as required at site ) and including cutting chases to wall for fixing of DB and making good distrubed wall/surface complete all as specified and directed. |
| 126 | Boring holeshorizontally under road without damaging the surface of road (minimum 1.0 metre below the road surface with the help of GI tubing not exc 100 mm bore(dia) for passing UG cable, complete all as specified and as directed.Note: GI Pipe laid will be measured and paid separately under respective item |
| 127 | S&F in replacement of 40 mm bore GItubinglight grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS clamps and nut and botls/washers complete all as specified . |
| 128 | S&F in replacement of 80 mm bore GItubinglight grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS clamps and nut and botls/washers complete all as specified and directed. |
| 129 | M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth strip 32x6 mm by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown iln electrical plate No. 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but without earth lead protection pipe and test on completion after dismantling unserviceable erthing (above GL only) complete all as directed. |
| 130 | Dismantling existing unserviceable feeder pillar box including disconnection from different sites complete all as specified and directed. |
| 131 | Disconnecting and taking out old existing unserviceable junction box and S & F in repairs IP rated junction box made of impact resistance polycarbonate & heat resistant materials of size 200x160x98mm mm, dust proof, water tight, light weight, acid resistant, corrotion proof insulated and shock proof, fire retardant, self extinguishing, helogen & silica free non toxic material, UV resistant with internally embedded gasket and fitted with required terminals alongwith complete all as specified and directed directed. |
| 132 | Disconnecting and taking out old existing unserviceable street light fitting of any description andSupply & fixing Street light fitting IP-66 powder coated pressure die cast aluminium housing with high power LED as lighting source with heat resistant toughtened glass 70 W LED with 10kv surge protection complete with all assessaries of capacity 70 wattall as specified and directed. |
| 133 | Taking out unserviceable LT U/G cable from trenches of size 6 Sqmm to 240 Sqmm 2/3/4 core complete all as specified and as directed. |
| 134 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95sq mm 3.5 core all as specified and directed |
| 135 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25sq mm 4 core all as specified and directed |
| 136 | Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed for laying of under ground cable, foundation of pole and stay etc. complete all as specified and as directed |
| 137 | Returning, filling in, including spreading, levelling, watering and well remmining in layers not exc 25 cm. |
| 138 | Removing excavated material n.exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point all as directed. |
| 139 | M&L for sand cushioning to U/G cable in layers of 23 cm thick (8 CM before laying the cable and 15 CM thick after laying the cable) in trenches complete all as specified and directed.Note: Only Puned down volume shall be measured. |
| 140 | Supply and lay burnt best quality locally available old size sub class \"B\" bricks laid in trenches perpendicular to U/G cable for cable protection complete all as specified and as directed. |
| 141 | M&L in replacement of 150 mm dia Butterfly Valve, ISI-marked confirming to IS:14846 suitable for following bore pipe, wheel oprated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valveincl. making arrangement for safe working all as specified and directed. |
| 142 | Supply & Fixing inreplacement 15 mm bore galvanized steel tubing, medium grade with all fittings and fixed to walls, ceilings or laid in floors, trenches complete as per IS 1239 Part-II all as specified and directed |
| 143 | Supply & fixing in replacement 15 mm dia of Gun-metal , globe or gate Valves, with iron wheel head , screwed both ends for iron pipe and fixed complete all as specified &as directed |
| 144 | Supply & fixing in replacement 40 mm dia of Gun-metal, globe or gate Valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 145 | Supply, install, test and commissioningin repair of chlorine dosing pump (venturi drive pump) 0-6 LPH with PP/PVC dozing tank capacity 150 Ltr-1 Nos and piping for inlet & outlet connection complete with control valves, NRV, metering, electric cabling & copper wiring through suitable size PVC concealed conduit from Main control panel to booster pump complete all as specified and as directed. |
| 146 | Supply, install, test and commissioning in repair of Alum Dosing pump (venturi drive pump) 0-6 LPH with PP/PVC dozing tank capacity 150 Ltr with high speed stirrer and piping for inlet & outlet connection complete with control valves, NRV, electric cabling & copper wiring through PVC conduit from Main control panel to booster pump complete all as specified and directed. |
| 147 | Supply, install, test and commissioning of Trolley mounted suction sweeper with self priming electric driven 1 HP pump set suitable for cleaning swimming pool capacity, 18 inch portable vacume head, telescopic rode 8+8 ft, 18 inch curved brushes, PH test Kit complete with PVC braided vacuum hose pipe of length minimum 30 Mt, 900 mm size Aluminium / bronze vacuum head, flexible copper cable from Main, PVC floats, wire rope and all connected accessories complete all as specified and directed |
| 148 | Supply, Install, testing & commissioning in replacement of factory made Out door type dust and vermin proof Feeder pillar LT panel board cubical double door hinged type compartmentalized ofsize 1.5x1x.95m,415 volts, AC 50 Hz fabricated of CRCA sheet 3.15 mm thick machine pressed and angle iron frame 50mm x 50mmx 6mm grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete including 4 poles aluminium bus bar of suitable size mounted on porcelain insulators and enclosed in chamber made out of 2mm thick CRCA sheet machine pressed and connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters on both side and comprising of the following: -(i) In commingMCCB 200 Amp, 50 KA, 4 Pole 415 Volt - 01 No(ii) Out going MCCB 100 Amp, 36 KA 4 Pole 415 Volt, - 01 No(iii) out going MCCB 63 Amp 4 pole 415 volt 25 KA - 03 Nos (iv) out going MCB 40 Amp 4 pole 415 volt 25 KA - 01 No(v) Aluminium bus bar for 3 Ph & Neutral 400 Amp- 01 Set(vi) Ammeter with 200/5 with CT- 01 No (vii) Voltmeter along with rotary switch range 0-500 Volt-01 No(vii) Phase indicator neon lamps for 3 Ph -01 Set(viii) Street light control console consisting of 01 No contactor 3 phase heavy duty 40Amps rating with 415Volts digital time switch, Alfa Rex D22, astro 2 channels with power back up -01 No MCB TPN 415V 32A -01 No (For street light) |
| 149 | Supply, installing, testing and commissioning in replacement of CPRI certified factory made LT pump starter panel indoor type fabricated out of 2.15 mm thick CRCA sheet for outer body and 1.6 mm thick CRCA sheet for inner partition walls, independent cabinet for cabinet doors for MCCBs, Starter, Bus bar, cable trays, metering equipment vertical type floor mounted, minimum IP-54 protection suitably grounded to PCC complete with internal wiring, epoxy powder coated and connection of cable ends with suitable size of aluminium cable lugs and angle iron structure of angle size 50x50x5mm duly spray painted with 2 coats of synthetic enamel paint as approved colour over a coat of red oxide paint comprising the following :- Note- Old unserviceable LT Pump Starter Panel to be deposited in AGE E/M Store(i) Aluminium busbar 3 phase 4 wire system suitable for 200 Amp capacity mounted on insulator.(ii) Incoming MCCB FP of 200 Amps 25 KA, 415 volt-01 No(iii) Outgoing MCCB TP 125 A,25 KA ,415 V-03 Nos(iv) Digital Ampere meter -0 - 30 Amp with selector switch-03 set(v) Digital voltmeter 0-500 volt with selector switch -03 set(vi) Indicating lamp LED type RYB-03 Nos(vii) DOL starter suitable for motor upto 10 HP,over load relay range 32 to 40 Amp 415 volts with single phase preventor etc complete -04 Nos(viiI) Star Delta starter suitable for motor upto 10 HP,over load relay range 32 to 40 Amp 415 volts with single phase preventor etc complete -01 Nos |
| 150 | Supply and fix in replacement of submersible flat copper cable conductor 3 core 10 Sqmm 1100 volts grade complete all as specified and directed. |
| 151 | S&F in replacement of old unserviceable centrifugal pump of capacity 7.5 HP, 3 Phase, 415 V having discharge 77.5 LPS at 35 ft head made of cast iron including grouting with anchor fastener and coupling and all connected accessories complete all as specified and directed.Note: Old unserviceable pumps to be deposited in AGE E/ M store |
| 152 | S&F pressure gauge 100 mm dia range 0 to 7 kg/cm2including all connected items and all connected accessories complete all as specified and directed |
| 153 | Supply, installation testing and commissioning in replacement of swimming pool water inozation plant, series 4 consisting of copper, silver and zinc anode, microprocessor with its connecting wire and copper testing kit of capacity 1450-750 ltrs/minute nade of ABS Food grade plastic material suitable to disinfect any type of water, operating on single phase 110-250 V AC 50-60 Hz power supply complete all as specified and direscted.Make: Ione Exchange/ Aquanomics/Arroyo Technologies Pvt Ltd/Thermax/Thosiba |
| 154 | Supply, installation, testing and commissioning in replacement of energizer (Solar Fencing System ) withkeypad having in built alarm unit and 90 dB siren complete with following electrical parameters as confirming to safety standard : IEC 60335, IS-8437 (Part-1 Human safety) and EMC directives complete all as specified and directed-Techanical Details are Auto Mode-Semi Automatic, Wire Diameter-2.59mm,Usage/Application-To protect crops from wild animals, Battery-26Ah Amaron make SMF, Output Energy-2J, Input Current-260 mA,Products Included-Battery, Energizer, Solar Penal, Features-Ether solar penal or battery charger or both can connect with electric solar operated zatka machine,Output Voltage-6 to 9 KV, Selectable Mode, Power Supply-12V DC, Pulse Interval-1.2 sec nominal, Input Voltage-12V DC,Pulse Duration-120 To 180 USEC,HV Output-9000V, 1 zone, LV Output-6000V, 1 zone,Output Current-6A,Solar Panel-40W 1.76A, Extra Power Mode-Yes, Battery Backup-1 Week, System control-Auto & Manual Mode Availabale, Indicator Lights-Yes, Protection from Load Short Circuit-Yes complete all asspecified and directed |
| 155 | Supplying, Installing, testing, commissioning submersible pumping set suitable for 150/100mm bore well with submersible motors 3 phase 415 Volts, 7.5 HP coupled with pump 285 mtr head, discharge range 125 LPM complete all as specified and directed.Note: (i) Discharge case shall be fitted with suitable adaptor not less than 0.6m length threaded at one end and flanged at other end to match with the column pipe duly fittedwith 02 Nos flat iron supports. The adaptor shall be welded to GI pipe outlet and studded with discharge case.(ii) The length of submersible cable connected alongwith motor supplied by manufacturer shall not be measured and paid for separately. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
