|
| 1 | Scarifying or picking gravelled macadam or bitminous macadom surfaces in area not exceeding 400 sqm for depth n.exc 50mm complete all as specified and directed. |
| 2 | M&L for 7.5cm thick (compacted thickness) water bound (WBM) with coarse stone aggregade of grading 2 (63 to 40mm size granite trap of basalt) spered,rolled of capacity 8 to 10 ton and consolidation to required gradient and camber complete all as specified and as directed. |
| 3 | M&L for applying evenly a priming/tack coat with bituminus primer @10kg/10sqm using paving bitumen complete all as specified and as directed |
| 4 | M&L premix bituminous, macadam using bitumen 4% (VG-30) by weight of total mix and mixed in hot mix plant, laid/rolled and compacted to rquired gradient and camber (consolidated thickness 75mm or less)complete all as specified and as directed. |
| 5 | M&L for preparation of existing blacktop surface by brushing with wire brushes for remove cacked mud ,sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust or dirt etc complete all as specified and as directed. |
| 6 | M&L for applying evenly a priming/tack coat with bituminus primer @5kg/10 sqm using paving bitumen complete all as specified and as directed |
| 7 | M&L for bitumenous premix asphalticsemi dense concrete40mm consolidated thickness with 5.5% binder (VG-30) contents by weight total mix, mixed in hot plant and laid with mechanical paver,rolled and compacted with power roller to required camber and gradient complete all as specified and directed. |
| 8 | Repair to pot hole any depth, n-exc 1 sqm each including sweeping free from dust and mud or water ,scoring sunken surfaces in road etc cutting around edges to at least 25mm in depth macking good by applying tack coat @ 5kg per 10 sqm,putting in premixed bitumen macadam, well rammed and sealed with binder 9.8kg /sqm,binded with 0.09cum of stone chipping 6.3mm size and again well rammed (including supply of premixd macadam,binder and chippings)depth of pot holes exc 30mm complete as specified and directed. |
| 9 | M&L 2mm thick, white/yellow hot thermoplastic road marking paintexc 10cm wideone coat conforming to BS 3262 with 20 % glass beds (inter mixed) applied with manually operted machine suitable for hot application at desired temperture, painting as in strips (continuos or breaking) complete all as specified and as directed. |
| 10 | removing exvacted soil exc 250m but n-exc500m deposited all as as specified and asdirected. |
| 11 | Demolition of Plain Cement Concrete in ground floor and paving not exc 15cm thick (below or above) ground level complete all as specified and directed. |
| 12 | M&L for pcc 100 mm thick type D2 1:4:8 (40mm graded agregade) as in sub base complete all as specified. |
| 13 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment as in floorcomplete all as spd & directed by Engr-in-Charge. |
| 14 | M&L PCC (1;2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of interlocking tilescomplete all as spd & directed by Engr-in-Charge. |
| 15 | M&L for sand cushion filling for floor, foundation etc including watering and consolidation complete. |
| 16 | M & L for 100 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) finishing smooth & even with using extra cement complete all as specified. |
| 17 | M & L for 75mm thick Plain Cement Concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), finished even and smoothwithoutusing extra cement as in plinth protrection complete all as specified and directed. |
| 18 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 19 | Supply and fix solar cat eye aluminum alloy shall(100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as permanufactures instructions etc. all as specified and directedMake; Dark EYE/3M/Sinor |
