|
| 1 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed. |
| 3 | Excavation in trenches n.exc 1.5m wide and depth exceeding 1.5 mand not exceeding 3.00m beyond first 1.50m and getting out in soft / loose soil etc complete all as specified and as directed. |
| 4 | Returning , filling in of excavated soil, including spreading , levelling , watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed. |
| 5 | Removing excavated material (Soils) to a distance exc 250 m but n exc 500m a and depositing whered directed at a level n exc 1.5m above the starting point complete all as specified and dircted. |
| 6 | Material and labour for plain cement concrete (1:4:8) type D-2, (using 40 mm gradedstone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 7 | Material and labour for hardcore of broken stones or boulders of gauge n.exc 63mm deposited,spread & levelled inlayers 100mm thick, watered & rammed to a true surfaces complete all as specified and directed. |
| 8 | Material and labour for reinforced cement concrete M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 9 | Material and labourfor reinforced cement concrete M-25 design mix as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 10 | Material and labour for reinforced cement concrete M-25 design mix as in beams, seimic bands, cantilevers, bressumers and lintels complete all as specified as directed. |
| 11 | Material and labour for plain cement concrete 1:2:4 type B0 (using 12.50 mm graded crushed stone aggregate) for coping on brick work complete all as specified as directed. |
| 12 | Supply only liquid water proofing compound . |
| 13 | Material and labour for Brick work masonry using class \"B\" old sized bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc complete all as specified as directed. |
| 14 | Material and labour for Granite 20mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 complete all as specified as directed. |
| 15 | Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified as directed. |
| 16 | Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified as directed. |
| 17 | Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete all as specified as directed. |
| 18 | Material and labour for mild steel TMT bars 10 mm dia and overas reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed |
| 19 | Material and labour for mild steel TMT bar of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed |
| 20 | Material and labour for framed work as in doors or gates, of angle or other section with gusset plates, rails, braces etc complete drilling for fixing of steel sheeting or other covering or slidding with including either hooks and hings or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and gudes) and ganging also fashting and complete with ornamental design Fe-290, grade E-165 also complete all as specified and as directed |
| 21 | Supply and fix rolled MS framed work for ornamental and intricate designsteel gates with gusset plates, rails, braces etc complete, ends of bars shouldered and/ or riveted, or forged into spikes and similar works etc to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings and hanging; also fastening and fixing complete conforming to FE 410-W (Gde E-250) quality A complete all as specified and directed. |
| 22 | Supply and fix MS plate (plain or chequred), channels, square cut or notched (Ordinary and counter sank) forming holes with riveted, bolted or welded aith attachment conforming to FE 290. Gde-E-165 complete all as specified and directed. |
| 23 | Supply and fix MS work for pintle hinges or any type of hinges for hung the steel gate, stops, hand made sliding bolts or handles etc complete conforming to FE 290. Gde-E-165 complete all as specified and directed. |
| 24 | Supply and fix rolled MS running rails and guides for sliding doors fixed with angle cleats or other connecting plates to the road surfaces and making goods after fixing conforming to FE 290. Gde-E-165 all as specified and directed. |
| 25 | Material and labour for 75mm thick plain cement concrete 1:2::4 type B1 (using 20mm graded stone aggregate) as in sub base of floor, etc finished fair and even without using extra cement complete all as specified and as directed. |
| 26 | Material and labour for heavy duty parking tiles size 300mm X 300 mm X 10 mm thickwhite cement and pigments of approved maked jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed. |
| 27 | Material and labour for Mirror polishing 20 mm thick Granite (of any type) tiles with high gloss finish machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointing with white cement with admixture of pigment to match the shade of granite stone including grinding & necessary polishing &over 15 mm thick screed with 1:4 CM complete all as specified and directed. |
| 28 | Material and labour 15mm thick rendering externally on brick or concrete surfaces in CM 1:4 mixed with liquid WPC @ 200 ml /50 kgby weight of cement or as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.(.Note :Water proofing compoundto be measured and paid separately as \"Supply only\"). |
| 29 | Material and labourfor prepration of newaly plastered surface of wall,applying a coat ofwall care putty 1.00 mm thick and two coat ofacrylic exterior weather resistant paint (weather proof paint) of tint as approved over one coat of alkli and fungal resistant primer complete all as specified and directed . |
| 30 | Supply and fix Stainless steel letter of figure (block, roman, italic or india) up to 60 cm high with LED light and SMPS complete all as spefified and as dorected |
| 31 | Material and labour two coats of cement base paint over a coat of primer on newly plastered surface on wall including preparation of surface complete all as specified and directed |
| 32 | Material and labour for two coats of synthetic enamel paints over a coat of primer to surfacesof any description n.exc 10 cm width or girth complete all as specified and as directed. |
| 33 | Material and labour for two coat of synthetic enamel paint over a coat of primer incl preparation of steel surface complete all as specified and directed. |
| 34 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc butexcluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified and as directed. |
| 35 | Demolition of cement concrete reinforced of any descriptioncomplete all as specified and directed |
| 36 | Material and labour for erection of steel tubularsteel tubular swaged pole type 410 SP - 31 (9.00 metres long) including cast iron base plate, finial taper plugandand painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 37 | Supply and fixstreet light junction box of size made of high quality polycarbonate with IP-66 protection (Dust and vermin proof according to IEC-60529) Totally insulated made of halogen and silica free recyclable material having high quality gasket made out of polyurethane withMCB, DP, 10KA, 6 Amps to be fixed on Din rail , with locking arrangement with cable glandsuitable upto 16 sqmm cable and necessary fixing arrangements such as clamps, nuts, bolts etcall as specified & directed by Engr-in-Charge. |
| 38 | Supply and fixing LED street light of capacity 60 Watt made up of pressure die cast aluminium housing withhigh power LED as light source and lens embedded PC cover including electronic driver should have luminaire efficacy ≥120 lumens/watt,CRI>70 ,PF > 0.95,CCT≥5500,IP66,impact resistance IK 07 ,inbuiltprotection against lightning , over voltage , short circuit and surge/spike protection device upto5 kV complete all as specified and as directed. |
| 39 | Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade with standed aluminium conductor of size 10 sqmm 4 core complete all as specified and as directed. |
| 40 | Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed. |
| 41 | Material and labour for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified |
| 42 | Material and labour for GI pipe light grade 40mm bore dia with all fittings to be laid in trenches or in floors, complete all as speciffied and as directed. |
| 43 | Supply and fixing including testing of Gate light / post-top light fitting 40W LEDwith die cast aluminium body with drive, 230 volts or nearest size and withIP-65 protection with high power LED as sourceall necessary fixing arrangments and fittings etc complete all as specified and as directed. |
| 44 | Material and labour for connection of junction box to street light luminaire using wiring with two runs (P-N) of single core 1.5 Sqmm (nominal area) FR-LSH PVC insulated and unsheathed multi-strandedcopper conductor cable 1100 volts gradeand one run of FR-LSH PVC insulated and unsheathed multi-stranded copper conductor of size 1.5sqmm single core as earth continuity wire drawn through PVC conduit(Heavy grade) and tiding the same by aluminium strip with the pole complete all as specified and directed. (Two single core 1.5 Sqmm cable and one single core 1.5 Sqmm earth conductor cable and one run of PVC conduit shall be measured as one run). |
| 45 | Material and labour for plain cement concrete 1: 3 : 6 type C-1 (using 20 mm graded mechanically crushed stone aggregate) as in mass concrete including necessary form work for coping to the new/existingsteel poles complete all as specified and directed. |
