Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M&L for repairs to 15 KVA DG Set Alternator by removing the same from Engine of DG Set, transporting the same to work shop and carrying out necessary repairs such as taking out the burnt out windings and rewinding with Super Enameled Copper wire of same Gauge, Turns and Weight including insulating material such as insulated paper, glass sleeve, cotton tape, varnish etc. & checking of Rectifier, Exciter, Rotor, Stator, Brushes, Commutator, Fan, Brush arm, Armature Ball Bearing, Field Coil etc complete and re-fixing the same in its existing position after transporting back to the site and connecting up electric connections with suitable lugs and testing complete all as specified and as directed & to the entire satisfaction of the Engineer-in-Charge. |
| 2 | IMPORTANT NOTE : (i)Cost of dismantling /decoupling /transporation and refixing /re-installation, strip opening of alternator and taking out burnt winding, cleaning the slot internally as well as externally, stator and bearings etc is deemed to be included in the unit quoted rates.(ii) Complete re-winding work to be carried out at auth workshop/service centre & cost of the same is deemed to be included in the unit quoted rates.(iii) Any item/job missed out in the item description/specification but technically required for successful completion of the work/job is deemed to be included in the unit quoted rates. (iv) Warranty for one year is to be given by the Contr from the date of re-winding of the alternator. (v) Alternator shall be repaired & re-installed within 07 days of removal/dismantling of the old unsv unit. Penalty @ Rs. 1000/- per day shall be charged for non-commissioning of the Alternator beyond alloted 7 days as cited above.(vi) All T&P, transportation etc. will be contractor arrangement. No extra charge shall be paid by the Department on that account.(vii) Complete job shall be carried out by a qualified Mechanic/Technician duly adopting adequate safety procedures. |
| 3 | (viii) Replacement of any other parts such as fan blade, connecting plate, ball bearing and repair to housing etc. is deemed to be included in the unit quoted rates.(ix) The contractor/firm is required to visit the site prior to quoting of the subject items/ work so as to ascertain the actual ground requirements. Any further query at a later date shall not be entertained & responsibility of the same shall rest on the contractor/ firm.(x) All work shall be carried out as per OEM guidelines.(xi) Functional testing is to be carried out post-re-winding/replacement of parts to verify all control sequences, operations correctness. (xii) Quoted rate is also deemed to be inclusive of any minor spares as decided by the Engr-In-Charge.(xiii) Ensuring compliance with system operational parameters and commissioning to full functional status. |
| 4 | Supply, install, commissioning & testing of Automatic Phase Sequence Corrector with Current Limiter (ACCL) perfectly suitable/compatible for 15 KVA capacity DG Set including removal of old u/s one complete all as specified and as directed & to the entire satisfaction of the Engineer-in-Charge. Make : Elmeasure/L&T/ABB/SIEMENS |
| 5 | Supply, install, commissioning & testing of Auto Start and Auto Mains Failure Control Module as per existing make (Kirloskar/Cummins/Greaves Cotton) & specifications for the following capacity of DG Sets including removal of old u/s one complete all as specified and as directed & to the entire satisfaction of the Engineer-in-Charge. Make : Kirloskar/Cummins/Greaves Cotton (As per Existing)(i) 15 KVA to 30 KVA capacity of DG Sets |
| 6 | (ii) 62.5 KVA to 125 KVA capacity of DG Sets |
| 7 | (iii) 160 KVA to 200 KVA capacity of DG Sets |
| 8 | (iv) 250 KVA to 320 KVA capacity of DG Sets |
| 9 | (v) 400 KVA to 625 KVA capacity of DG Sets |
| 10 | IMPORTANT NOTE for Item Nos 2.00 & 3.00 : (i)Design/Drawing/Technical catalogue/specifications etc. from the OEM/Auth Dealer/Supplier etc. is to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items before placing order to the Manufacturer/Supplier.2) Cost of all equipments/T&P/Transportation/Hiring Charges etc. required for successful completion of the work/job is deemed to be included in the unit quoted rates.3) Unit quoted rate is deemed to be be inclusive of replacement guarantee of 01 Years from the date of installation of the Item/Eqpt in the event of non/improper functioning.4) Original Purchase Vouchers & Test Certificates is to be submitted to the Engr-In-Charge for checking/records purpose. 5) Any item/job missed out in the item description/specification but technically required for successful completion of the work/job is deemed to be included in the unit quoted rates. 6) The contractor/firm is required to visit the site prior to quoting of the subject items/ work so as to ascertain the actual ground requirements. Any further query at a later date shall not be entertained & responsibility of the same shall rest on the contractor/ firm.7) The complete job/work is to be carried out from OEM/Auth Dealer/Supplier/Channel Partner etc. |
| 11 | M&L for Panel Board Wiring of DG Sets as per existing make (Kirloskar/Cummins/ Greaves Cotton) for the following capacity DG Sets including removal of old unsv panel wiring and testing commissioning complete all as specified and as directed & to the entire satisfaction of the Engineer-in-Charge. IMPORTANT NOTE :- (i)Cost of removing of old/unsv panel wiring is deemed to be included in the unit quoted rates. (ii)The cost of required qty of wires for rewiring, lugs, connectors, cable trays, casing etc. is deemed to be included in the unit quoted rates. (i) 15 KVA to 30 KVA capacity of DG Sets |
| 12 | (ii) 62.5 KVA to 125 KVA capacity of DG Sets |
| 13 | (iii) 160 KVA to 200 KVA capacity of DG Sets |
| 14 | (iv) 250 KVA to 320 KVA capacity of DG Sets |
| 15 | (v) 400 KVA to 625 KVA capacity of DG Sets |
| 16 | Supply and fixing of DG Set Stop Valve, Shut-Off Solenoid Valve, ABS Shell Compact Size Servo Motor Control DC with Protection Switch for Electrical Device (Power Off NC 12V/24V) for the DG Set including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-in-Charge. Make : As per Existing |
| 17 | Supply, install, commissioning & testing of Sealed Maintenance Free (SMF) Battery, initially charged& of capacity 180 AH, 12 Volt with 48 Months Replacement Warranty complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : Exide/Amaron |
| 18 | Supply, install, commissioning & testing of Sealed Maintenance Free (SMF) Battery, initially charged& of capacity 150 AH, 12 Volt with 48 Months Replacement Warranty complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : Exide/Amaron |
| 19 | Supply, install, commissioning & testing of Sealed Maintenance Free (SMF) Battery, initially charged& of capacity 100 AH, 12 Volt with 48 Months Replacement Warranty complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : Exide/AmaronIMPORTANT NOTE for Item Nos 6.00, 7.00 & 8.00 : (i)Design/Drawing/Technical catalogue/specifications etc. from the OEM/Auth Dealer/Supplier etc. is to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items before placing order to the Manufacturer/Supplier.2) Cost of all equipments/T&P/Transportation/Hiring Charges etc. required for successful completion of the work/job is deemed to be included in the unit quoted rates.3) Unit quoted rate is deemed to be be inclusive of replacement guarantee/warranty of 48 Months.4) Original Purchase Vouchers & Test Certificates is to be submitted to the Engr-In-Charge for checking/records purpose. 5) Any item/job missed out in the item description/specification but technically required for successful completion of the work/job is deemed to be included in the unit quoted rates. |
| 20 | M & L for repairing of doors of DG Set Canopy by replacement of alloy steel hinges (LH/RH) by making necessary arrangement such as but screws/ Nuts & Bolts including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. (i) 15 KVA and upto62.5 KVACapacity DG Set |
| 21 | Above 62.5 KVA and upto 125 KVA Capacity DG Set |
| 22 | Above 125 KVA and upto 320 KVA Capacity DG Set |
| 23 | Above 320 KVA and upto 625 KVA Capacity DG Set |
| 24 | M&L for welding work at site for DG Silencer Assy of capacity 15 KVA DG Set including removal, re-fixing as per existing, commissioning & testing after repair complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge.IMPORTANT NOTE : 1) Cost of all equipments/T&P/Transportation/Hiring/Welding Charges etc. required for successful completion of the work/job is deemed to be included in the unit quoted rates. 2) Any item/job missed out in the item description/specification but technically required for successful completion of the work/job is deemed to be included in the unit quoted rates. 3) The complete job/work is to be carried out from experienced Welder/Technician etc. |
| 25 | M&L for Copper Wiring of DG Sets of 15 KVA Capacity as per existing make/specifications (Kirloskar/Cummins/ Greaves Cotton etc.) including removal of old unsv wiring incl commissioning & testing after re-wiring complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. IMPORTANT NOTE : 1) The cost of required qty of Wires/Wiring Kit, Connectors etc. is deemed to be included in the unit quoted rates. 2) The complete job/work is to be carried out from OEM Auth Service Dealer etc. |
| 26 | M&L for repairing of Fuel Injector Pump Assy by removing the same from the Engine, transporting to an authorized service centre for repairing, calibration, necessary adjustments etc. by replacing the worn-out spares with new & appropriate spares of makes as recommended by OEM/Service Dealer and re-fixing to the engine and tune up for maximum efficiency complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge for following capacities of DG set : IMPORTANT NOTE : Cost of all required spares is deemed to be included in the unit quoted rates. 15 KVA and upto62.5 KVACapacity DG Set |
| 27 | Above 62.5 KVA and upto 125 KVA Capacity DG Set |
| 28 | Above 125 KVA and upto 320 KVA Capacity DG Set |
| 29 | Above 320 KVA and upto 625 KVA Capacity DG Set |
| 30 | Supply and fixing of Stainless Steel housing material (ISI marked) for LLOP Pressure Sensor operated with 12 V to 24 V DC Supply Voltage, 2/3 Pin, 0 to 10 Bar Pressure range perfectly suitable for existing Kirloskar/Cummins /Greaves Cotton DG sets complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing |
| 31 | Supply, install, commsioning & testing of Alternator AVR (Automatic Voltage Regulator)perfectly suitable for DG Sets of capacity ranging from 15 KVA to 250 KVA incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : Kirloskar/cummins/Stamford (As per Existing) |
| 32 | Supply, install, commsioning & testing of Alternator AVR (Automatic Voltage Regulator)perfectly suitable for DG Sets of capacity ranging from 320 KVA to 625 KVA incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : Kirloskar/cummins/Stamford (As per Existing)IMPORTANT NOTE for Item Nos 14.00 & 15.00 : (i)Design/Drawing/Technical catalogue/specifications etc. from the OEM/Auth Dealer/Supplier etc. is to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items before placing order to the Manufacturer/Supplier.2) Cost of all equipments/T&P/Transportation/Hiring Charges etc. required for successful completion of the work/job is deemed to be included in the unit quoted rates.3) Unit quoted rate is deemed to be be inclusive of replacement guarantee/warranty of 12 Months.4) Original Purchase Vouchers & Test Certificates is to be submitted to the Engr-In-Charge for checking/records purpose. 5) Any item/job missed out in the item description/specification but technically required for successful completion of the work/job is deemed to be included in the unit quoted rates. |
| 33 | M & L for repairing of doors of DG Set Canopy by replacement of transparent fibre glass 2 to 3 mm (as per existing) for display of controller window as per existing size/dimension of following capacity of DG Sets with & including necessary items/spares such as rubber beading, screws/Nuts & Bolts including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. (i) 15 KVA and upto62.5 KVACapacity DG Set |
| 34 | Above 62.5 KVA and upto 125 KVA Capacity DG Set |
| 35 | Above 125 KVA and upto 320 KVA Capacity DG Set |
| 36 | Above 320 KVA and upto 625 KVA Capacity DG Set |
| 37 | M & L for repairing of doors of DG Set Canopy by replacement of Stainless Steel 304 Woven Wire Mesh Sheet - 15 Mesh, 0.4 mm Hole, 1mm Thickness - Ideal for Air Ventilation, Window Screens, Mosquito Nets, Rat Barriers etc. as per actual ground requirement & as per existing size/type of DG sets of following capacities with & including necessary items/spares such as adhesives, beadings etc. including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge.15 KVA and upto62.5 KVACapacity DG Set |
| 38 | Above 62.5 KVA and upto 125 KVA Capacity DG Set |
| 39 | Above 125 KVA and upto 320 KVA Capacity DG Set |
| 40 | Above 320 KVA and upto 625 KVA Capacity DG Set |
| 41 | M & L for repairing of door of DG Set Canopy by replacement of acoustic insulation 1.6/2.0 mm Fire Retardant Foam using Rock Wool : 64/96 Kg/m3 noise barriers and sound reduction level 70-75 db as per actual ground requirement & as per existing size/type of DG sets of different capacities with & including necessary items/spares such as screws/ Nuts & Bolts including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. |
| 42 | M & L for repairing of door of DG Set Canopy by replacement of acoustic enclosure/panels with insulation using Rock Wool : 64/96 Kg/m3 noise barriers and sound reduction level 70-75 db as per actual ground requirement & as per existing size/type of DG sets incl painting matching with existing colour/grade of DG with & incuding necessary arrangements such as T&P, Alloy Steel/ SS hinges, But Screws, locking arrangements, Ventilators, Beading frames, Screws/ Nuts & Bolts etc. including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. |
| 43 | S&F 63 AMP Standard Connection Plate, PCB Terminal Block For Electrical Panels, 4 pole including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. |
| 44 | S&F Fuel Tank Cap welded on filler neck cap as per existing size/type of Diesel tank neck with gasket including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. |
| 45 | S&F Fuel Overflow Pipe Set/Assy perfectly suitable for DG Sets of capacity 15 KVA including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing/As recommended by OEM |
| 46 | Supply, install, commissioning & testing of SMPS 12 V-10 AMP, 50 HZFully Automatic Battery Charger with 7AH to 220AH Charging Capacity for DG Set and 12 Volt Charger complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : KOEL/Bosch |
| 47 | Supply, install, commissioning & testing of SMPS 24 V-10 AMP, 50 HZFully Automatic Battery Charger with 7AH to 220AH Charging Capacity for DG Set and 24 Volt Charger complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : KOEL/Bosch |
| 48 | S&F Trigger Assembly perfectly suitable for 15 KVA DG Set including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing/As recommended by OEM |
| 49 | S&F Diesel Hose Pipe/Assy perfectly suitable for DG Sets of different capacities including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing/As recommended by OEM |
| 50 | S&F Trigger Assembly perfectly suitable for 62.5 KVA to 125 KVA DG Sets including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing/As recommended by OEM |
| 51 | Supply, install, commissioning & testing of AMF Panel Contactor Coil perfectly matching/suitable for existing 15 KVA to 250 KVA DG Sets including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : L&T or Techno-commercially equivalent (As per Existing) |
| 52 | Supply, install, commissioning & testing of AMF Panel Contactor Coil perfectly matching/suitable for existing 250 KVA to 500 KVA DG Sets including removal of old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : L&T or Techno-commercially equivalent (As per Existing) |
| 53 | M & L for painting of DG Sets of capacity 15 KVA to 62.5 KVA complete in existing colour/grade (As per OEM)with twocoats of synthetic enamelled paint by spray machine over one coat of approved primer after preparation of surfacescomplete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make of Paint : Asian/Berger/JSW |
| 54 | M & L for painting of DG Sets of capacity 62.5 KVA to 125 KVA complete in existing colour/grade (As per OEM)with twocoats of synthetic enamelled paint by spray machine over one coat of approved primer after preparation of surfacescomplete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make of Paint : Asian/Berger/JSW |
| 55 | M & L for painting of DG Sets of capacity above 125 KVA to 250 KVA complete in existing colour/grade (As per OEM)with twocoats of synthetic enamelled paint by spray machine over one coat of approved primer after preparation of surfacescomplete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make of Paint : Asian/Berger/JSW |
| 56 | M & L for painting of DG Sets of capacity above 250 KVA to 625 KVA complete in existing colour/grade (As per OEM)with twocoats of synthetic enamelled paint by spray machine over one coat of approved primer after preparation of surfacescomplete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make of Paint : Asian/Berger/JSW |
| 57 | M&L for dismantling of Radiator Assy from DG Set, drain out the coolant, carrying out servicing, arresting leakages by welding/brazing etc. with & incl Supply and replacing the unsv Mounting Rubber, Canvas Radiator Jacket, clean the internal surfaces and Descaling by using cleaning agents and fixing back in position & supply and top up (as applicable) approved grade/type Coolant with the recommended ratio of the water into Radiator complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge for the following capacities of DG Sets :15 KVA and upto62.5 KVACapacity DG Set |
| 58 | Above 62.5 KVA and upto 125 KVA Capacity DG Set |
| 59 | Above 125 KVA and upto 320 KVA Capacity DG Set |
| 60 | Above 320 KVA and upto 625 KVA Capacity DG Set |
| 61 | M&L for Servicing of Radiator Assy by draining out the Coolant and cleaning the internal surfaces, Descaling by using cleaning agents, supply and top up (as applicable) approved grade/type Coolant with the recommended ratio of the water into Radiator complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge for the following capacities of DG Sets :15 KVA and upto62.5 KVACapacity DG Set |
| 62 | Above 62.5 KVA and upto 125 KVA Capacity DG Set |
| 63 | Above 125 KVA and upto 320 KVA Capacity DG Set |
| 64 | Above 320 KVA and upto 625 KVA Capacity DG Set IMPORTANT NOTES for Item Nos 34.00 & 35.00 : 1) Cost of all equipments/T&P/Transportation/Hiring/Welding Charges etc. required for successful completion of the work/job is deemed to be included in the unit quoted rates. 2) Any item/job missed out in the item description/specification but technically required for successful completion of the work/job is deemed to be included in the unit quoted rates. 3) The complete job/work is to be carried out from experienced Welder/Technician etc. 4) Make of Spares/items shall be as Recommended by OEM/Service Dealer/Maint Manual 5) Unit quoted rate is deemed to be be inclusive of guarantee of 01 Years from the date of re-installation of the Item/Eqpt in the event of non/improper functioning. |
| 65 | Supply, install, commissioning & testing of Self Starter Assy 12 Volts perfectly suitable for 15 KVA to 125 KVAMake: lucas / Bosch |
| 66 | Supply, install, commissioning & testing of Self Starter Assy 24 Volts perfectly suitable for 160 KVA to 625 KVAMake: lucas / Bosch |
| 67 | Supply, install, commissioning & testing of MCX-47 Power Contactor 800 A, 4 Pole, 415 V AC with auxiliary contactors of 2 NO + 2 NC, AC1 perfectly suitable/compatibe for existing AMF panel of DG set of capacity 500 KVA to 625 KVA incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : L&T/ABB/ Schneider/C&S |
| 68 | Supply, install, commissioning & testing of MCX-45Power Contactor 600 A, 4 Pole, 415 V AC with auxiliary contactors of 2 NO + 2 NC, AC1 perfectly suitable/compatibe for existing AMF panel of DG set of capacity 320 KVA to 400 KVA incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : L&T/ABB/ Schneider/C&S |
| 69 | Supply, install, commissioning & testing of MCX-43 Power Contactor 400 A, 4 Pole, 415 V AC with auxiliary contactors of 2 NO + 2 NC, AC1 perfectly suitable/compatibe for existing AMF panel of DG set of capacity 160 KVA to 250 KVA incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : L&T/ABB/ Schneider/C&S |
| 70 | Supply, install, commissioning & testing of MCX-32/ MCX -33/MCX-34 Power Contactor 200 A to 250 A, 4 Pole, 415 V AC with auxiliary contactors of 2 NO + 2 NC, AC1 perfectly suitable/compatibe for existing AMF panel of DG set of capacity 82.5 KVA to 125 KVA incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : L&T/ABB/ Schneider/C&S |
| 71 | Supply, install, commissioning & testing of MNX-140 Power Contactor 140 A, 3 Pole, 220 V AC with auxiliary contactors of 2 NO + 2 NC, AC1 perfectly suitable/compatibe for existing AMF panel of DG set of capacity 50 KVA to 63 KVA incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : L&T/ABB/ Schneider/C&S |
| 72 | Supply, install, commissioning & testing of Rectifier Assy complete including diodes perfectly suitable/compatible for DG Sets of capacity 15 KVA to 125 KVA of existing Make/Model with and including providing minor spare parts/repair kit etc. for achieving optimum output of the alternator incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing/Recommendation of OEM |
| 73 | Supply, install, commissioning & testing of Rectifier Assy complete including diodes perfectly suitable/compatible for DG Sets of capacity 160 KVA to 625 KVA of existing Make/Model with and including providing minor spare parts/repair kit etc. for achieving optimum output of the alternator incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing/Recommendation of OEM |
| 74 | Supply, install, commissioning & testing of Oil Cooler Assy perfectly suitable/compatible for DG Sets of capacity 15 KVA to 125 KVA of any make and including providing minor spare parts/repair kit etc. for achieving optimum output of the engine incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing/Recommendation of OEM |
| 75 | Supply, install, commissioning & testing of Oil Cooler Assy perfectly suitable/compatible for DG Sets of capacity 160 KVA to 625 KVA of any make and including providing minor spare parts/repair kit etc. for achieving optimum output of the engine incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing/Recommendation of OEM |
| 76 | Supply, install, commissioning & testing of Water Pump Assy for DG Sets as per existing Make/Model of following capacities incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing/Recommendation of OEM 15 KVA and upto 160 KVA Capacity DG Set |
| 77 | Above 160 KVA and upto 625 KVA Capacity DG Set |
| 78 | Supply, install, commissioning & testing of Sensor Unit for Engine Safety Control Unit (Precol Panel Assy) perfectly suitable/compatible for DG Sets of capacity 15 KVA to 125 KVA of existing Make/Model with and including providing minor spare parts/repair kit etc. for achieving optimum efficiency/output incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing/Recommendation of OEM |
| 79 | Supply, install, commissioning & testing of Sensor Unit for Engine Safety Control Unit (Precol Panel Assy) perfectly suitable/compatible for DG Sets of capacity 160 KVA to 320 KVA of existing Make/Model with and including providing minor spare parts/repair kit etc. for achieving optimum efficiency/output incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing/Recommendation of OEM |
| 80 | Supply, install, commissioning & testing of Sensor Unit for Engine Safety Control Unit (Precol Panel Assy) perfectly suitable/compatible for DG Sets of capacity above 320 KVA to 625 KVA of existing Make/Model with and including providing minor spare parts/repair kit etc. for achieving optimum efficiency/output incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : As per Existing/Recommendation of OEM |
| 81 | Supply, install, commissioning & testing of VMR 3 P ( Voltage Monitoring Relay Protection of 3 Phase) as per existing Make/Model upto 625 KVA DG Sets and making necessary connections, incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : Minilec (As per Existing) |
| 82 | S&F FIP Bearing for following capacity of DG sets :-15 KVA and upto 62.5 KVACapacity DG Set |
| 83 | Above 62.5 KVA and upto 125 KVA Capacity DG Set |
| 84 | Above 125 KVA and upto 320 KVA Capacity DG Set |
| 85 | Above 320 KVA and upto 625 KVA Capacity DG Set |
| 86 | Supply, install, commissioning & testing of MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 100 to 125 A incl spreader terminals complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge.. Cat No : DZ0F0125CXC1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. |
| 87 | Supply, install, commissioning & testing of MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 168 to 250 A incl spreader terminals complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Cat No : DZ4F0250DXD1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. |
| 88 | S&F upto 10 Sqmm copper conductor unsheathed, multistranded, PVC insulated, FRLS, 1100 Volts grade, single core cable for necessary connections of different LT Panel Boards/AMF Panels of DG Set of any capacity complete with thimble, lugs and connectors etc. as required at site incl spreader terminals complete all as specified and as directed & to the entire satisfaction of the Engineer-In-Charge. Make : Polycab/Finolex/Havells/KEIIMPORTANT NOTE for Item Nos 36.00 & 55.00 : (i)Design/Drawing/Technical catalogue/specifications etc. from the OEM/Auth Dealer/Supplier etc. is to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items before placing order to the Manufacturer/Supplier.2) Cost of all equipments/T&P/Transportation/Hiring Charges etc. required for successful completion of the work/job is deemed to be included in the unit quoted rates.3) Unit quoted rate is deemed to be be inclusive of replacement guarantee/warranty of 12 Months.4) Original Purchase Vouchers & Test Certificates is to be submitted to the Engr-In-Charge for checking/records purpose. 5) Any item/job missed out in the item description/specification but technically required for successful completion of the work/job is deemed to be included in the unit quoted rates. |
| 89 | Supply, install, commissioning & testing of Outdoor Type AMF Panel suitable for DG Set of upto 15 KVA of size 1000 mm (height) x 900 mm (breadth) x 500 mm (depth) (minimum dimensions) factory fabricated CPRI (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming/Outgoing ACB/MCCB rating (as applicable). The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv existing panel complete all as specified & as directed with & incl the following accessories : |
| 90 | SEB I/C : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 26 to 32 A - 01No. Cat No : DZ0F0032CXC1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS.DG I/C : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 26 to 32 A - 01No. Cat No : DZ0F0032CXC1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS.AMF MAIN O/G : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 26 to 32 A - 01No. Cat No : DZ0F0032CXC1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS.COMPACT ENCLOSED ATS (Automatic Transfer Switch) suitable for inside panel mounting & I-O-II operation, 4 Pole, 40 A, confirming to IEC 60947-6-1 - 01 No complete with following features/specifications : (i) Double-Break Contact System offering High Short-time Withstand.(ii) Ample Space for Cable Termination.(iii) Ease of Generator Control (ON-OFF, Cooling Cycle Self-Test).(iv) Cyclic Event Logger.(v) Priority Source Selection.(vi) Adjustable Time Delay (0.1 Sec to 3 Hrs).(vii) Suitable for 3-Phase as well as 1-Phase sources.(viii) Protections - UV/OV, Phase Sequence, Single Phasing, Frequency.(ix) Terminal Shrouds, Phase Barriers & Source Separator etc.Make : Cat No 1SYN151252R1001 of make ABB or techno-commercially equivalent of L&T/Siemens.The size/rating of all the connected accessories viz. MFM, RYB Indication Lamps, MCBs, 50/5 CT Coils, DG Start/Stop Relay, 12V/10A Battery Charger, OV/UV Relays, 230V Aux Contactor, DG Set Running Indication Lamp, Load ON Mains/DG Indication Lamps etc. of the AMF Panel shall be as per OEM & in conformity with the I/C & O/G MCCBs duly provided with BYPASS system/arrangement complete. |
| 91 | IMPORTANT NOTE :- (i) Design/drawing/BOM of the AMF panel showing the dimensions is to be obtained from DG SET/Panel board manufacturer/Auth supplier & is to be got approved from Engr-in-charge & GE before placing final order to the manufacturer.(ii) The electrical connection of digital Multi Functional Meter in the AMF panel is to be done from load side so that monitoring of various parameters viz. Voltage, Current, KW, KVA, power factor, frequency etc. can be done for both SEB mains & DG mains. (iii) The cost of periodical/routine servicing including minor repairs/replacement including periodical checking of the complete AMF panel for the complete defect liability period from the authorized Service Dealer as & when required/due is deemed to be included in the unit quoted rates.(iv) The complete installation, commissioning & testing of the AMF Panel is to be got done from the OEM or their auth Rep/Sister Concern/Channel Partners only.(v) Anything missed out in the technical specifications but technically required for efficient working of the AMF Panel is deemed to be included in the quoted rates.(vi) Necessary PCC foundation/plinth shall be as per the recommendations of OEM & cost of the same is deemed to be included in the quoted rates.(vii) The approximate distance between the DG Set & the AMF Panel shall be within 20 Mtrs & the cost of control cabling etc. from DG Set to the AMF Panel is deemed to be included in the unit quoted rates.(viii) The DG Set & AMF Panel shall be completely suitable for switching ON the DG Set whenever EB Supply goes OFF & transfer the load to DG & vice-versa in the event of resumption of EB Supply.(ix) The contractor/firm is required to visit the site prior to quoting of the subject items/ work so as to ascertain the actual ground requirements. Any further query at a later date shall not be entertained & responsibility of the same shall rest on the contractor/ firm.(x) The cost of spreader links for MCCBs is also deemed to be included in the unit quoted rates. |
| 92 | Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade ofcross sectional area, 4.0 Core 10 Sqmm incl connecting with suitable glands, lugs etc incl taking down old unsv one complete all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab/Gloster |
| 93 | M&L for HDPE DWC (Double Wall Corrugated) Pipe ofrating 450 N, ISI marked with Min OD 77/75 mm & Min ID 63 mm, Orange colour for LT UG Cable protection with & including Couplers with rubber rings & RR & NFP properties/features confirming to IS 16205 Part 24:2018 & IEC 61386 Part 24:2007 complete all as specified & as directed by the Engr-In-Charge. Make : Astral/Supreme/Ashirvad/Finolex |
| 94 | M&L for earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to GI earth strip 32 x 6 mm by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with suitable funnel and wire mesh, 40 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion incl taking down old unsv earthing assy complete all as specified and as directed by the Engr-in-Charge. |
| 95 | M&L for earthing complete with Copper earth plate electrode 600 x 600 x 3.15 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to Copper earth strip 20 x 3 mm by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with suitable funnel and wire mesh, 40 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion incl taking down old unsv earthing assy complete all as specified and as directed by the Engr-in-Charge.NOTE : On completion of the complete work/job the Contr is to perform earth resistance tests for each earthing job in the presence of the Engr-In-Charge or his rep & submit test certificates duly signed & certified. If the test results are not satisfactory or not within the permissible limits i.e. 1.0 Ohm then the job is to be redone without any extra cost to the Dept till the results are satisfactory. |
| 96 | M & L for laying earth continuity conductor or main earthing lead of 20x3 mm copper strip, fixed to wall on batten or recess or chasses or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc, as required all as directed and specified. |
| 97 | M & L for laying earth continuity conductor or main earthing lead of 32x6 mm galvanised iron strip, fixed to wall on batten or recess or chasses or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc, as required all as directed and specified. |
| 98 | M&Lfor GI pipe light grade with all running fittings (ISI Marked), laid in trenches, under road or fixing on wall/pole/crossing drain/nallah etc. of bore 40 mm complete all as specified and directed.Make : TATA/JINDAL/PRAKASH. |
| 99 | Excavation in trenches by mechanical means n.exc 1.5m wide and n.exc 1.5m in depth forlaying of pipe and getting out in hard dense soil complete.NOTE : (i) The requirement of JCB (if any) for cutting the hard standing/PCC/WBM road surface or during earthwork is deemed to be included in the unit quoted rates. (ii) If any damage to any Cable of Air Force/BSNL/MES etc. or to any Pipe lines develops/occurs during execution of the works then the same shall be made good by the Contr to the entire satisfaction of the concerned Dept/Section & the costs of the same is deemed to be included in the unit quoted rates.(iii) Quoted rate is also deemed to be inclusive of clearing/removing/cutting of vegetation/tree branches/small to medium plantings/bushes etc. so as to facilitate successful completion of the work. No extra/addl payment shall be allowed to the Contr in this regard.(iv) The contractor/firm is required to visit the site prior to quoting of the subject items/ work so as to ascertain the actual ground requirements. Any further query at a later date shall not be entertained & responsibility of the same shall rest on the contractor/ firm. |
| 100 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick. |
| 101 | Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
