Tender For Providing And Placing Of Precast Rcc Benches (Chair Bench With Back Rest 55 Nos) And Providing And Fixing Victorian Type Garden Benches Of Approved Design Having Both Side Arms Made Of Moulded Single Peace Cast Iron (32 Nos) In Sadh Nagar. Kail, Delhi-Delhi
TDR : 53844628
Tender Notice
BOQ
6 Days Left
Delhi
Delhi
Tender For Providing And Placing Of Precast Rcc Benches (Chair Bench With Back Rest 55 Nos) And Providing And Fixing Victorian Type Garden Benches Of Approved Design Having Both Side Arms Made Of Moulded Single Peace Cast Iron (32 Nos) In Sadh Nagar. Kail
Name of Work: Providing and placing of precast RCC benches (chair bench with back Rest 55 nos) and Providing and fixing victorian type garden benches of approved design having both side arms made of moulded single peace cast iron (32 nos) in Sadh Nagar. Kailash puri, different parks, schools and market etc. in AC-37 ward no 138 Sadh Nagar NGZ.
Sl. No.
Item Description
1
Providing and placing
2
Providing and fixing of precast RCC chair bench with arm rest each bench consists of 2 no. L-shaped base support in grey cement colour (thickness 80 mm x90 mm, 890 mm back height; 450 mm front height with base width 690 mm) and 1 no. reinforced concrete plank in red colour of size 1500mm x 400 mm x 50mm and 1 no. of reinforced concrete plank in red colour 425mm * 50 mm and 1 no. of reinforced concrete plank in red colour of size 1500 x 425 mm x 50 mm total height of the bench 890 mm manufactured using cement concrete 1:1.5:3 (1cement: 1.5 coarse sand: 3 stone aggregate 12.5 mm nominal size) using vibro compaction process reinforced suitably to prmote long use and to prevent damage during handling. Transportation & erection, all parts are joined together with galvanised nuts and bolts of suitable size and all bolts are sealed after assermebly, bench top and back planks are treated with special anti-corrosive water proof coating so as to make surface glossy and water proof and as per direction of Engineer-in-Charge.
3
Victorian type garden bench of approved design haing both side arms made of moulded single piece cast irong having weight not less than 48 kg with back height 720 mm (± 5 mm) and seating height 390 mm (approximate). Both side arms of bench shall be connected with 11 numbers M.S. Tubes, rectangular type 65x25 mm and 16 SWG gauge thick of length 1500 mm for seating and back purpose with extra support of seating position of bench with 25x5 mm M.S. flat. The bench shall have the provision of hold fasts fixed with all he four legs embedded in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of blocks of size 0.23x0,23x0.30 metre including excavation of pits for four concrete blocks including primer and painting with approved quality of enamel paint like Berger, Asian, Nerolac paints etc. Minimum weight of bench shall be 90 kg per bench. (The weight of all the steel and cast iron memberrs as mentioned above). The work shall be executed as per entire satisfaction and direction of Engineer-in-Charge.Note: 1. The rate is inclusive of the cost of CC Block and excavation.2. For weight less than 90 kg recovery on pro-rata base shall be made.3. No payment shall be made for weight more than 90 kg.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
