Tender For De-Silting Of Karawal Nagar Nalla From Sadatpur Gali No-6 To Mukhiya Market Chowk L.H.S Sh1- 1St, 60 Percent Of Desilting Of Drain In 1Nd Phase From 16.01.2026 To 15.06.2026 Sh2- 40 Percent Of Desilting Of Drain In 2Nd Phase From 16.06.2026 To , Delhi-Delhi
TDR : 53840701
Tender Notice
BOQ
3 Days Left
Delhi
Delhi
Tender For De-Silting Of Karawal Nagar Nalla From Sadatpur Gali No-6 To Mukhiya Market Chowk L.H.S Sh1- 1St, 60 Percent Of Desilting Of Drain In 1Nd Phase From 16.01.2026 To 15.06.2026 Sh2- 40 Percent Of Desilting Of Drain In 2Nd Phase From 16.06.2026 To
Name of Work: De-silting of Karawal Nagar Nalla from Sadatpur gali no-6 to mukhiya market chowk L.H.S SH-(1) 1st, 60% of Desilting of drain in 1nd Phase from 16.01.2026 to 15.06.2026 SH:(2) 40% of Desilting of drain in 2nd Phase from 16.06.2026 to 15.01.2027 in ward No-248 Karawal Nagar west Shah.N.Zone
Sl. No.
Item Description
1
Excavation in nalla/drains in running conditioninclduing takeing out and disposal of excavatedsilt/sludge/rubbish/earth mixed malba etc.from the drain, culvert and other similar conditions under submerged/foul condition with 50 metre lead and 1.5 m lift, blocking drain in the required length by placing sand filled bags and pumping out water including removal of stone, brick bats, clotting material etc. before excavation Open nalla
2
Engaging Tractor and Trolley fitted with Jack Systemwith driver and including T & P, fuel, lubricant forlifting/collecting of MSW/garbage/ malba/drain silt etc. up to full load capicity and dumping the same in the nearby designated site /SLF up to travelling distance 40km per day for 8 hours working. Capacity of trolley should not be less than 4 tonne.(under foul conditions)
3
Engaging beldar for collection, loading and unloading the MSW/garbage/malba/drain silt etc. to the vehicle associated with. Engaging one beldar under foul condition.
4
Carriage of material by mechanical transport including loading, unloading and stacking: 18 km leadManure or sludgeExcavated 18 km lead
5
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
