|
| 1 | Stone for masonry work |
| 2 | wall form panel 1250x500 mm |
| 3 | 100 mm channel shoulder 2.5 m long |
| 4 | Structural steel such as tees, angles, channels and R.S. joists |
| 5 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 6 | Beam clamp 300-380 mm (450-1070 mm) |
| 7 | Second class kail wood in planks |
| 8 | Second class kail wood in scantling |
| 9 | Hollock ballies 125 mm diameter |
| 10 | Adjustable span ESO+SI (2.35-3.40) |
| 11 | Royalty for good earth |
| 12 | Twisted steel/deformed bars |
| 13 | Stone Aggregate(single size):20 mm nominal size |
| 14 | Stone Aggregate(single size): 10 mm nominal size |
| 15 | Coarse sand (zone III) |
| 16 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 17 | Vibrator (Needle type 40 mm) |
| 18 | Laterite stone of size 35x20x20cm |
| 19 | Multi surface paint |
| 20 | Special primer (C.W) |
| 21 | Aluminium T or L Sections |
| 22 | Anodised Aluminium butt hinges 100x75x4 mm |
| 23 | Chromium plated Brass screws 20 mm |
| 24 | Powder coating 50 microns on aluminium sections |
| 25 | Neoprene / EPDM rubber gasket |
| 26 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 27 | 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage |
| 28 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
| 29 | Bright finished or black enameled mild steel screws 40 mm |
| 30 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
| 31 | G.I. pipes 40 mm dia |
| 32 | Welding by electric plant |
| 33 | Mild Steel round bar above 12 mm dia |
| 34 | Flats up to 10 mm in thickness |
| 35 | Vitreous China orrisa type w.c. pan size 580 mm |
| 36 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 37 | 100 mm S.C.I. trap with vent heel |
| 38 | Vitreous China flat back wash basin 630x450 mm |
| 39 | 15 mm C.P.brass tap |
| 40 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 41 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 42 | Plastic emulsion paint |
| 43 | Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement |
| 44 | PVC pipe 110 mm outer dia. 4kgf/cm2 |
| 45 | PVC pipe 75 mm outer dia 4 kgf/cm2 |
| 46 | PVC Socket/coupling 75 mm dia |
| 47 | C.I. bracket for wash basin and sinks |
| 48 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 49 | Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm |
| 50 | Wall form panel 1250x450xmm |
| 51 | Column clamp 450x1070 mm |
| 52 | Prop 2 m (2-3.5m) |
| 53 | Solid blocks of size 40x20x15cm |
| 54 | Hollow blocks of size 40x20x20cm |
| 55 | Fine sand (zone IV) |
| 56 | Stone Aggregate(single size): 40 mm nominal size |
| 57 | Vitrified floor tile 60x60 cm |
| 58 | Portland Cement Please Enable Macros to View BoQ information |
