|
| 1 | M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level,earth plate surrounded from all sides by 15mm thick and packed layer of charcoal dust and common salt filling in altemate layers Including refilling with good earth specified and electrode connections by using GI wire of 4sqmm size by means of bolts,nuts,checknuts and washers made of GI and provision of GI pipe medium grade 15 mmdia for protection of earthing lead and 20mm dia for watering arrangement Including funnel,wire mesh, CI pit cover and PCC chamber pit with PCC 1:2:4 type B-2 Including Taking out old unserviceable earthpit necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50mtr all as specified and shown on plate No 3 of MES Part-I. |
| 2 | M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level,earth plate surrounded from all sides by 15mm thick and packed layer of charcoal dust and common salt filling in altemate layers Including refilling with good earth specified and electrode connections by using GI iron strip of 32x6mm size by means of bolts,nuts,checknuts and washers made of GI and provision of GI pipe medium grade 400 mm dia for protection of earthing lead and 20mm dia for watering arrangement Including funnel,wire mesh, CI pit cover and PCC chamber pit with PCC 1:2:4 type B-2 Including Taking out old unserviceable earthpit necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50mtr all as specified and shown on plate No 3 of SSR part-1.Note :(a) Copper strip /GI strip/GI wire beyond test point shall be measured and paid separately however earth strip upto test point shall be deemed to be inclusive in quoted rates. |
| 3 | Supply and fix Earth contnuty conductor or main earthing lead GI strip 32 x 6 mm with porcelain /PVC insulator,saddled not exeeding 400mm spacing for roof conductor/down conductor with fixing screws or buried in ground or drawn in conduit /pipe/duct or fixed to poles or any other indicated situation for loop earthing etc. conductor conneting and jointing completly with Brazing/Welding the overlap portion of any size copper Strip together copper plate/ rod/GI strip etc. as per site requirment Including Taking down old rusted/broken earth continuity strip all as per specified and directed by Engr-in-Charge. |
| 4 | All as per Item No: 3 above but GI/steel wire of size 4mm dia all as specified and directed by Engr-in-charge. |
| 5 | Material and labour for chart/ poster/ diagram / name plate etc made out of perpex sheet 2 mm thick, cut to size and shape with colour background and diagram and letters including fixing arrangement with screws / adhesives as required complete all as specified and directed by Engineer in charge.Note: The content and size of chart/ poster /diagram / name plate etc shall be as per standard engineering practice given by the Engr in charge during execution of work. |
| 6 | Spray Painting of Pump & Motor any type, capacity upto 25 HP of various pump housesas per colour code (Shade) of MES specification after cleaning the dust particle of existing motor & Pump as directed by Engr-in-Charge |
| 7 | M & L for Preparation of old painted surfaces and applying two coats of synthetic enammel paintson external surfaces of over head reserviour of any height and any size of CI/GI/DI suction / delivery pipes and ladder etc. complete all as specified and directed by Engr-in-charge. |
| 8 | Taking down carefully unserviceable copper/aluminium point wiring(light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover,including taking down of DB’s, meter board any type all as specified and as directed. |
| 9 | Point wiring concealed/cassing capping with 1.5 Sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed), drawing in and including PVC conduit 20 mm dia, having wall thickness not less than 2 mm with sunk cast iron/pressed steel terminal boxes made out of 1.2 mm thick sheet including one coat red oxide primer on internal and external surface covered with 3 mm thick hylam brand IS-2036 marked laminated modular sheet cover (for mounting switches, sockets, regulators etc), including 1.5 Sqmm PVC insulated (multistranded) FRLS copper conductor continuous earth wire for one light /fan point/bell point/5Amp Socket controlled by one, one way switch on independent board complete all as specified and directed. |
| 10 | All as per item No-9 above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 2.5 Sqmm size. |
| 11 | All as per item No-9 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size. |
| 12 | All as per item No-9 above but for one 3 pin socket out let, 16 Amps on Independent board with the cable 2.5 Sqmm size. |
| 13 | S&F Switch piano flush type single pole 5 Amps,230 Volts 50 Hz complete all as specified and directed. |
| 14 | Supply and fixing ceiling rose surface bakelite 2 to 3 terminals 65x50mm compelete all as specified. |
| 15 | Taking down unserviceable submain wiring and M&L for submain wiring with 2 single core PVC insulated & PVC unsheathed FRLSH cable 1100 Volt grade with 4 Sqmm copper multistranded conductor drawn through and includingPVC conduit concealed in wall/ ceiling including one run of 4.0 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed by Engineer-in-Charge. Two runs of cable, PVCconduit and earth continuity conductor will be measured and paid as one length only). (ii) Cost of cutting/leaving/forming chases for PVC conduit and its accessories, sinking of MS boxes and making good to match existing surfaces shall be deemed to be included in the unit rate quoted for item). |
| 16 | All as per item No-15 above but size 10 sqmm two run and with 10 sqmm FRLS copper wire for earth continuity complete. |
| 17 | All as per item No-15 above but size 16 sqmm two run and with 16 sqmm FRLS copper wire for earth continuity complete. |
| 18 | S&F Switch socket combination ,5A/16A, 5 in 1flush type with fuse & neon incator, complete all as specified and directed by Engr-in-charge. |
| 19 | S&F Switch socket combination ,5A, 5 in 1flush type with fuse & neon incator, complete all as specified and directed by Engr-in-charge. |
| 20 | Taking down unserviceable DB of any description and S&F Sheet metal enclosures factory made powder coated ,vertical type MCB DB,SPN 8 ways with compact bus bar ,assembly 240 V,double door protection ,corner safe ,shrounded neutral bus bar , MCBs as outgoing circuits including grouting on the wall by means of nuts,bolts angle iron and making good disturbed surfaces complete all as specified and directed by Engr-in-charg. Make:Legrand/HAVELLS / SIEMENS/HagerNote: MCB will be measured and paid separatly under relevant items. |
| 21 | MCB SP 6 to 32 Amp, 240 volts, 50Hz, C series of breaking capacity 10 KA, complete all as specified and directed. |
| 22 | MCB SPN 6 to 32 Amp, 240 volts, 50Hz, C series of breaking capacity 10 KA, complete all as specified and directed. |
| 23 | Taking down unserviceable PTL fittings of any wattage/size and Supply and fix LED post top lantern light fitting 20 watt complete With all accessories. |
| 24 | Taking down unserviceable FTL fittings of any wattage and S&F energy saving decorative box type batten light fitting surface mountedcomplete with high efficiency PMMA diffuser soft glare free light LED lamp 18/20 watt suitable for 120 volts to 270 volts of system efficacy not less then 100 lumen/watt, with all accessories, pre-wired,including lamp and providing flexible copper wire, twin core cable complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply and fixing 36 watts recess /pendant mounting ultraslim LED flat panel2\" X 2\" made of extruded aluminiumframe with high LEDs & glare free opal diffuser IP20 incl taking down old UNSV. |
| 26 | S&F of lamp holder insulated body with back plate for batten fittingwith 12 watt LED bulb of make Bajaj/Syska/Havells including taking down unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply andFixing retro reflective sign board of size 3.0\"x2.5\" made of ACP sheet 6mm thick fixed with screws frame made of MS Angle of size 40 x 40 x 5mm , vertically support with angle iron of size 50 x 50 x 6mm of height not less than 2.3 metre and showing content as directed by Engr-in-charge Note:- (i)The background of board shall be of Blue colour retro reflective tape and letters shall be of White retro reflective tape.(ii)The size of letters and description shall be as per sample approved by Engineer-in-Charge (iii) Painting of steel frame and legs of board shall be included in the rate quoated by the contractor.(iv) Necessary PCC work and excavation shall be measured and paid separately.Make Retro Reflector tape Avery Dennison. |
| 28 | Supply & fixing retro reflective sign board of sutable size made of ACP sheet 4mm thick. The background of board to be provided with high quality retro tape Blue base HIP(High Intensity Prismatic) grade sheet colour retro reflective tape and letters with white retro reflective tape. The size of letters and description as per sample approved by Engr-in-Charge including taking out old rusted iron sign board complete. Location: Pump House- 05, STP-03, Power House-05. |
| 29 | Supply and fixing MCCB four pole 125 Amps, 36 KA 415 volts |
| 30 | Supply and fixing MCCB four pole 200 Amps, 36 KA 415 volts |
| 31 | Supply only contactor for pump MNX-70 for pump House No-8 & 11 all as specified and directed. |
| 32 | Supply only Contactor for Pump MNX-25. |
| 33 | Supply only Contactor for Pump MNX-18. |
| 34 | Supply only Timer and Relay.Make: Cat Part No SS9414500E0 of L&T or Equivalent in approved makes. |
| 35 | S&FWater Proof light Luminaire for fountains make as per existing site all as directed by Engineer In Charge |
| 36 | Supply, laying and testing PVC insulated and sheathed flat 10 Sqmm 3 core copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including taking out old unserviceable cable complete. |
| 37 | Supply and Fix Iron foot valves size of 80 mm to 100mm and complete all as specified and directed by Engineer In Charge. |
| 38 | Taking down old u/s starter and Supply and install star delta starter in sheet steel enclosure with three phase protection feature suitable for operation on AC, Three phase four wire , 415 Volts, 50 Hz supplyfor Motor of capacityup to 40 HP with relay range 9-15Amps complete and directed by Engr- in Charge. |
| 39 | Supply and fixing cast iron flanged butterfly valve including taking down old unserviceable valve of size 150mm dia complete all as specified and directed by Engineer-in-charge |
| 40 | Supply and fixing in replacement direct-on-line starter in sheet metal enclosure for motor rating 415 Volts, 3 phase, 50 Hz, 9-14 Amps relay maximum range of capacity 7.5 HP complete all as specified and as directed. |
| 41 | S&F pressure pump 0.5 HP for officer mess & Trikuta Accn all as specified and directed. |
| 42 | S&F Non clogging submersible vertical pump single phase01 HP for dewatering complete all as specified and directed. |
| 43 | Taking out unserviceable water level controller and repair replacement of water level controller all as specified and directed. |
| 44 | M & L for fixingnew street light bracket made out of GI pipe light grade 32/40 mm bore approx length not less than 120 cm bent to shape including new clamps made of MS flat of size 40x5 mm thick including cutting ,welding ,drilling holes ,nut,bolts washers etc including two coat of aluminium paint over one coat of red oxide primer on MS work complete all as specified and as directed.Make of pipe : Jindal (Hisar), Tata , Prakash Surya/Elecrosteel |
| 45 | M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in pole for pole foundation, coping, stay pits etc including provision of necessary form work to aachieve fair finishes surfaces, complete alal as specified and directed. |
| 46 | S&F Steel tubler swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-55 (11 mtr long) and duly painted with two coats anticirrosive paint internally upto planting depth, alternate black and yellow straps of synthetic enamel paint 30 cm each upto 1.5 mtr from ground level and remaining pole with aluminium paint including wiring all as specified by Engineer-in-charge. |
| 47 | Supply, install and erect in true vertical position (or to be fixed in an inclined position as strut pole) steel tubular swaged poles complete with MS base plate of 6 mm thick of size 300 mm x 300 mm, finial taper plug, pole cap, bolts, nuts and washers and screwed pole made out of FRW MS tubing conforming to IS-2713 (Part-II) 1980 type 410-SP-31 ( 9 meters long ) pole including drilling of holes of required size and Nos for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embeded in concrete, etc complete all as specified and directed |
| 48 | Supply, install and erect in true vertical position (or to be fixed in an inclined position as strut pole) Octagonal Mild steelpole, silver color complete with Top dia 70mm, Bottom dia 130 mm, 3mm thick, MS base plate 200X200X12mm and foundation bolt M20X600mm andstreet light bracket single arm suitable of LED street light including drilling of holes of required size etc complete all as specified and directed in and incl taking down carefully old deterioiated RCC/steelpole. |
| 49 | Supply and fixing of four core cable Junction Boxes with terminals` Aluminium busbar,IP 66 \"halogen free and weather proof” for outdoor installation (with metric knockouts for cable entry - Black Colour) Cable Size 10 to 35 Sqmm 4 core,Box Dimensions-280 x200 x 98complete taking out of loop of cable from ground by neccessary earth work all as spcefied and directed by Engr-in- charge.Make- Hensel/Dowells |
| 50 | Supply & fixing Indus series Powder coated pressure die cast alluminium compact high power LED floodlight/security lightfittings with heat resistant toughned glass with lense having90 Watt including making electric connections using two run of 1.5 sqmm single core unarmoured wire from junction box, fixed in repairs complete all as specified and as directed by Engr-in-Charge. Note :(i) A certificate from the manufactures for warranty minimum upto 02 years shall be obtained and submitted to the AGE/GE(i) Any touch up of the existing surface due to changing of fittings shall be done by contractor with similar surface finish without extra cost to the department. |
| 51 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. |
| 52 | Returning, filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25 cms thick after laying and testing of cable complete all as specified and directed. |
| 53 | Removing excavated soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above starting point complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply,laying,jointing & testing of MSpipe of 300 mm dia medium grade (heavy duty)type Incl necessary fixing MS nut,bolt,washer & gasket etccomplete all as specified. |
| 55 | Supply , laying,jointing & testing of DI Type K-7 pipe, 100mm dia, with socket & spigot ends, with cement morter zinc coatedout side asper IS 8329/2000 in standard length suitable for and including push on tyton joints with rubber rings, laidintrenches,including taking up or down old unserviceable water mains (including all fittings), of any type including burning out joints incliding turning water OFF or ON as necessary and taking off and refixing covers, access doors etc.complete all as specified and directed by Engr in charge. |
| 56 | Supply , laying,jointing & testing of DI Type K-7 pipe, 150mm dia, with socket & spigot ends, with cement morter zinc coatedout side asper IS 8329/2000 in standard length suitable for and including push on tyton joints with rubber rings, laidintrenches,including taking up or down old unserviceable water mains (including all fittings), of any type including burning out joints incliding turning water OFF or ON as necessary and taking off and refixing covers, access doors etc.complete all as specified and directed by Engr in charge. |
| 57 | Supply , laying,jointing & testing of DI Type K-7 pipe, 200mm dia, with socket & spigot ends, with cement morter zinc coatedout side asper IS 8329/2000 in standard length suitable for and including push on tyton joints with rubber rings, laidintrenches,including taking up or down old unserviceable water mains (including all fittings), of any type including burning out joints incliding turning water OFF or ON as necessary and taking off and refixing covers, access doors etc.complete all as specified and directed by Engr in charge. |
| 58 | M& L for MS/CI/DI fittings such as collar, bends, any type, any dia, any radius, any angle, double end socketted or double flanged or spigot & socket, tail pieces, all socketed or all flanged with an equal & other end taperingbellmouth or flanged plates, connecting pieces straight, both end flanged or socketed of socket & flanged & spigot ends or bellmouth tailpieces, one end flanged & other end spigot or socket or tatering as bell mouth or flanged, caps blank flanges heavy duty suitable for mechanical joint/flanged joint with and including taking down old fitting of any type and any size all as specified & directed by Engineer In ChargeNote: Certifiacte for Weight of fitting by the manufacturere shall be submitted before payment. |
| 59 | Framed work as in doors or gates of angle or main hole cover of UG/Semi UG sump tank of any size MS sheet or channel for foundation of sand and carbon filter/General frame work at STP duly welded any having open and close the cover welding two butt hinges labour for cutting, welding ofGI/MS pipes in position for reduced to required length for insertion of new fittings upto 150mm bore including painting with two coat of synthetic enameled paint over a coat of primer including taking out unsv cover complete all as specified.and as directed by Engineer-in-charge. |
| 60 | Material and labour for construction of masonary valve chamber of internal size 600x600x600mm with concrete solid block masonary (20cm thick in PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregates) set in cement mortar 1:6 over 100mm thick PCC (1:4:8) type D2 concrete foundation, 50mm thick PCC (1:2:4) type B1 in coping 15mm thick plaster in cm (1:4)m for internal surfaces of walls and externally upto 15cm below ground level, including MS sheet 3.15mm thick hinged cover with locking arrangements including lifting handle fixed to 50x50x6mm angle iron frame embedded in PCC coping including two coats of synthetic enamel paint to steel surfaces; over a coat of red oxide primer including necessary excavation and earth work in any type of soil and removal of surplus excavated soil to a distance not exceeding 50mtr including dismantling of old broken valve pit chamber complete all as specified and diretcted |
| 61 | Material and labour for construction of masonary valve chamber of internal size 1200 x 1200 x 900 mm with concrete solid block masonary (20cm thick in PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregates) set in cement mortar 1:6 over 100mm thick PCC (1:4:8) type D2 concrete foundation, 50mm thick PCC (1:2:4) type B1 in coping 15mm thick plaster in cm (1:4)m for internal surfaces of walls and externally upto 15cm below ground level, including MS sheet 3.15mm thick hinged cover with locking arrangements including lifting handle fixed to 50x50x6mm angle iron frame embedded in PCC coping including two coats of synthetic enamel paint to steel surfaces; over a coat of red oxide primer including necessary excavation and earth work in any type of soil and removal of surplus excavated soil to a distance not exceeding 50mtr including dismantling of old broken valve pit chamber complete all as specified and diretcted |
| 62 | Taking down unserviceable Aviationlight fittings from overhead reservoir and Map Area building and S & F of LED type Aviation obstruction light 230 volt yellow painted die-cast aluminium alloy housing, red coloured polycarbonate dome and accessories.complete with internal wiring and connected to earthing complete all as specified and directed by Engineer-in-charge. |
| 63 | Supply and fixing and testing CI sluice valves, 200 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostaticpressure 15 Kg/Sqcm. (PN 1.0) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply and fixing and testing CI sluice valves, 150 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostaticpressure 15 Kg/Sqcm. (PN 1.0) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge. |
| 65 | Supply and fixing and testing CI sluice valves, 100 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostaticpressure 15 Kg/Sqcm. (PN 1.0) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply and fixing and testing CI sluice valves, 80 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostaticpressure 15 Kg/Sqcm. (PN 1.0) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge. |
| 67 | Supply and fixing and testing NON ReturnCI sluice valves both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostaticpressure 15 Kg/Sqcm.and confirming to IS 780 complete and of size 100mm dia |
| 68 | Supply and fixing and testing NON ReturnCI sluice valves both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostaticpressure 15 Kg/Sqcm.and confirming to IS 780 complete and of size 150mm dia |
| 69 | M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 80 mm bore dia of CI/DI pipe complete all as specified and as directed. |
| 70 | M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 100 mm bore dia of CI/DI pipe complete all as specified and as directed. |
| 71 | M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 150 mm bore dia of CI/DI pipe complete all as specified and as directed. |
| 72 | S & F in replacement of heat resistance, weather proof agro shed net for covering of tanks complete with fixing arrangement around the tank complete all as specified and as directed. |
| 73 | M & L for quartz silica sand of 32-64 grade media size complete all as specified and as directed. |
| 74 | M & L for quartz silica sand of 16-32 grade media size complete all as specified and as directed. |
| 75 | M & L for quartz silica sand of 08-16 grade media size complete all as specified and as directed. |
| 76 | M & L for quartz silica sand of 04-08 grade media size complete all as specified and as directed. |
| 77 | M & L for activated carbon filter media IV1000 size complete all as specified and as directed. |
| 78 | Supply and fixing of brush assembely suitable for vaccum pool cleaner motor cap 2 HP complete all as specified and directed. Make- Modi Model B200M |
| 79 | M & L cleaning of silt, sludge mudaccumulated at bottom of pool drain,pumping out existing water from swimming pool, balancing chamber, under ground water storage sump complete,cleaning the pool, chamber and under gound water storage sump throughly by brushing,removing ugly spot,algae by using acid or harpic and finally washing with bleaching powder to entire satisfaction of Engineer-in- charge. |
| 80 | S&F nylon net wire mesh(like mosquito net) two meter in breadth and eight meter in length for cleaning of any unwanted particles/insect in the swimming pool. |
| 81 | S&F hard plastic teeth brush for cleaning ofswimming pool of size 30 cm length and width not less than 10 cms fixed with light grade GI pipe 15 mm bore of 6 mtr Length. |
| 82 | Supply only copper sulphate of superior quality complete all as specified. |
| 83 | Supply only bleaching powder complete all as specified. |
| 84 | S&Fnylon wire mesh with frame 18\"x18\" connected with extended rods made of stainless steel 12 \" in lengthfor lifting of floating suspended particles on water complete as approved by Engnr-in- Charge. |
| 85 | S&F only PVC floating ball, coloured, 10\" dia all as directed. |
| 86 | S&F only PVC wire netting bag of suitable size for 10\" dia PVC ball all as directed. |
| 87 | M&L for carry out water quality anyalsis for bacterial , chemical and biological analysis including for collection of water samples from the swimming pool or form location as specified by Engineer-in-charge and testing from Govt approved testing laboratory , submitting of report from minimum following parameters. (a) Free chlorine (b) pH (c ) Total Hardness(d) Total Alkalinity(e) Bacterological standards (f)Chemical standards (g) physical standards of Govt testing lab.Notes: 1. Separate water samples should be collected & tested for Each location as specified above2. No payment shall be made to contractor till submission of water testreport for the water samples ofloactions mentioned above . |
| 88 | M&L for removing of existing filter media from the pressure filteration plant and cleaning of pressure filter tank by removing ofsand,stone,mud,sludge and brocken stainer etc and fixing ofnew strainer approx 50 nos with change of new fiter media of following size:(a)white quartz pebbles of size 8 mm to 10 mm(b) white quartz sand of size 2 mm to 3 mm(c)fine white quartz sand and testing of filter including applying of existing synthetic enamel paint two coats over a coat of red oxide primer all as specified and as directed.Note-Filter media of different sizes will be supplied and paid separately |
| 89 | M&L for fixing of green colour rubber hose 50 mm and also removing of old unserviceable rubber hose complete all as specified and directed by Engineer-in-Charge. |
| 90 | M&L for dismantling of copper silver ionisation filter electrodes,fixing new silver ionisation filter electrode, checking of feed water pump,flow meter,control ball valves and also electrical connections complete all as specified and directed by Engineer-in-Charge. |
| 91 | M&L for removing ofsluice valves, repairing, refacing, regrinding, replacement of gland packing and refixing back to its original position including repacking of stuffing box of sluice valve spindle all as specified and as directed by Engineer-in-Charge. |
| 92 | Supply and install centrifugal pump controller unit for AC 3phase 415V Centrifugal/monoblockmotor 10Hp capacity and Max relay range 9-14A, Model No : MU-G6 DOL Starter, Cat No SS97756 of Make: L&T or equivalent in Havells/siemens with taking down old unserviceablestarter of any type all as specified and direted by Engineer-in-Charge. |
| 93 | Supply and fixing in replacement pressure guage of 0-100 psi, complete all as specified and as directed. |
| 94 | Material and Labour for disconnecting and removing the motor of any make/model / type, from base frameby disconnectingelectrical connections and pump couplers, taking it to workshop for repair, rotor assembly, removing burnt out winding wires complete, Rewinding of Motor same guage and type of insulation copper conductor winding wires and insulation sheets , applying insulating varnishover the complete winding, drying up by heating , assembling back the and rotor including replacement of bearing, nuts, bolts, studs, Gasket, packing,locking pin, terminal blocks, and terminal bolts and nuts and misc accessories & hardware required for making motor functional, both end bearings (labour only) with same size/make complete for 3Ph, 415V, 7.5 Hp motors all as specified and as directed. |
| 95 | Material and labour for Maintenance/servicing of centrifugal/ monoblock pump set 3.5/5/7.5 HP capacity by means greasing, oiling, replacement of gland of suitable size to stop water leakage from pump set, replacement of coupling, flange and replacement ofnuts, bolts etc as directed at site. |
| 96 | Supply only white quartz pebbles of size 8 mm to 10 mm complete all as specified and directed by Engineer-in-charge. |
| 97 | Supply only white quartz pebbles of size 2 mm to 3 mm complete all as specified and directed by Engineer-in-charge |
| 98 | Supply only fine white quartz sand complete all as specified and directed by Engineer-in-charge. |
| 99 | Supply and fixing of filters strainerin filteration plant and also removing old filters strainer complete all as specified and directed by Engineer-in-charge including making arrangements for welding of strainer as required at site. |
| 100 | Rewinding of motor of Induction motor up to 2 HP capacity insulated copper wire of existing gauge and size to achieve the specified / required RPM including taking out old unserviceable winding complete all as specified and directed. |
| 101 | M&L for daily cleaning of swimming pool by operating vaccum pool suction sweeper on floor cleaning of side walls with wire brush for minimum 2 Hrs in morning from 6 AM to 8 AM and as when required and full time cleaning on every Tuesday by deputing adequate manpower for maintenance of swimming pool complete. Note:-(i) Operation of suction sweeper motor provided by the department.Any damage to the department assets handedover for cleaning due to negligence of firm shall be made good by the firm without any extra cost to the department.(ii)T&P, material, labour, element involved in cleaning shall be provided by firm without any extra cost. |
| 102 | Supply only altoc GP calcium based granular disinfectant for water treatment packing 45Kgs plastic drum all as specified and directed. |
| 103 | SCHEDULE \"A\" PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch \"A\" Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. |
