|
| 1 | CHAIR DININGM&L for removal of existing broken/unserviceable front leg of chair dining, replacing the same with new front leg, made out of 460 x 55 x 30mm 1st class hard wood (Teak) made to shape for chair dining and all exposed surfaces duly French polished and fitted as shown in drg including provision of a hard rubber ring screwed at the bottom of the new leg, all as specified and as directed. FD-279, 228 & 203 |
| 2 | M&L for removal of existing broken/unserviceable rear leg of chair dining, replacing the same with a new rear leg, made out of 890 x 55 x 30mm 1st class hard wood (Teak) made to shape with the existing leg and all exposed surfaces duly French polished and fitted as shown in drg including provision of a hard rubber ring screwed at the bottom of the new leg, all as specified and as directed. FD-279, 228 & 203. |
| 3 | M&L for removal of existing broken top back rest of chair dining and replacing the same with a new back rest made out of 405 x 45 x 35mm tapering to 405 x 45 x 15mm 1st class hard wood (Teak) made to shape by slightly concaving and all exposed surfaces duly French polished and fitted all as shown in drg and as specified and as directed. FD-279, 228 & 203. Note : Each back rest shall be measured as separate unit. |
| 4 | M&L for removal of the existing broken front rail of the seat of chair dining and replacing the same with a new one made out of 440 x 30 x 65 mm in 1st class hard wood (Teak) made to shape, provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown in drg and as specified and as directed. FD-279, 228 & 203. |
| 5 | M&L for removal of existing broken back rail of the seat of chair dining and replacing the same with a new one made out of 405 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown in drg and as specified and as directed. FD-279, 228 & 203. |
| 6 | M&L for removal of existing broken, side rail of the seat frame of chair dining and replacing the same with a new one made out of 430 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown in drg and as specified and as directed. FD-279, 228 & 203. |
| 7 | M&L for removal of existing/broken bottom stiffener complete of chair dining and replacing the same with new stiffeners made out of 25 x 20 mm 1st class hard wood (Teak) having a length of 430 mm and all exposed surfaces duly French polished and fitted all as shown on drg and as specified and as directed. FD-279, 228 & 203. |
| 8 | CHAIR WRITING`-Ditto- all as per item No. 1 here-in-above but replacing front leg of chair writing with new leg made out of 685x55x30mm all as specified and as directed FD-280, 250 |
| 9 | `-Ditto- all as per Item No.2 here-in-above but replacing the rear leg of chair writing with new leg made out of 890 x 30 x 55mm all as specified and as directedFD-280, 250 |
| 10 | `-Ditto- all as per Item No. 3 here-in-above but replacing the back rest of chair writing with new back rest made to shape to 50 x 15mm out of 50 x 35mm all as specified and as directed FD-280, 250 |
| 11 | M&L for removal of existing broken/unserviceable any one arm rest of chair writing and replacing the same with a new arm rest made to shape out of 25mm thick, top width 60mm, tapering to the bottom having a width of 55mm, length 470 mm 1st class hard wood (Teak) including French polishing all exposed surfaces and fitted all as shown on drawing and as specified and as directed. FD-280 & 250. |
| 12 | `-Ditto- all as per Item No.7 here-in-above but bottom stiffener complete of chair writing having a length of 470mm, all as specified and as directed. FD-280,250 |
| 13 | M&L for removal of existing broken front/back/side rail of seat frame of chair writing and replacing the same with new one made out of 440 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown in drg and as specified and as directed.FD-280/250. Note : Each rail shall be measured as separate unit. |
| 14 | CHAIR EASY`-Ditto- all as per Sl Item No.1 here-in-above but replacing front leg of chair easy made to shape out of 545 x 55 x 25 mm all as shown on drg and as specified and as directed. FD-229 & 201 |
| 15 | `-Ditto- all as per Sl Item No. 2 here-in-above but replacing rear leg of chair easy made to shape out of 490 x 55 x 25 mm all as shown on drg and as specified and as directed. FD-229 & 201 |
| 16 | `-Ditto- all as per Sl Item No. 11 here-in-above but replacing arm rest of chair easy made to shape out of 610 x 65 x 25 mm all as shown on drg and as specified and as directed. FD-229 & 201 |
| 17 | `-Ditto- all as per Sl Item No.4 here-in-above but replacing front rail of chair easy seat frame made to shape out of 510 x 55 x 25 mm all as shown on drg and as specified and as directed.FD-229 & 201 |
| 18 | `-Ditto- all as per Sl Item No. 5 here-in-above but replacing rear rail of seat frame of chair easy made to shape out of 480 x 70 x 40 mm all as shown in drg and as specified and as directed.FD-229 & 201 |
| 19 | `-Ditto- all as per Sl Item No. 6 here-in-above but replacing side rail of seat frame of chair easy made to shape out of 575 x 70 x 40 mm all as shown on drg and as specified and as directed. FD-229 & 201 |
| 20 | M&L for removal of existing top / bottom rail of back rest frame of chair easy replacing the same with new one made to shape out of 480 x 55 x 40mm1st class hard wood (Teak) provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown on drg and as specified and as directed. FD-229 & 201.Note : Each rail shall be measured as separate unit. |
| 21 | M&L for removal of broken unserviceable side rail of back frame of chair easy replacing with new one made to shape out of 440 x 70 x 25 mm 1st class hard wood (Teak) provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly French polished and fitted all as shown on drg and as specified and as directed. FD-229 & 201 |
| 22 | M&L for removal of the existing broken Stiffener rail of chair easy and replacing with new one, made to shape out of 510 x 50 x 25 mm 1st class hard wood (Teak) and all exposed surfaces duly French polished and fitted all as shown on drg and as specified and as directed. FD-229 & 201 |
| 23 | PEG TABLEM&L for removal of existing damaged top of peg table and replacing the same with new top 18mm thick prelaminated particle board 450 x 300 mm size (Novopan/Kitply/Greenply/Ecoboard/Archidlam/Bhutan) with one side decorative teak finish including 18mm wide, 4 mm thick teak wood edging on all sides including French polishing teak wood edging and as shown in drg and as specified and as directed. FD-236 |
| 24 | M&L for removal of existing damaged any one leg of peg table and replacing the same with new leg 362 mm long x 30 x 50mm first class hard wood (Teak), and all exposed surfaces French polished and fixed all as shown in drg and as specified and as directed. FD - 236 |
| 25 | M&L for removal of existing broken long rail of peg table and replacing the same with new rail 400 mm long x 30 x 50mm first class hard wood (Teak), and all exposed surfaces French polished and fixed all as shown in drg and as specified and as directed. FD-236 |
| 26 | M&L for removal of existing broken short rail of peg table and replacing the same with new rail 250 mm long x 30 x 50mm first class hard wood (Teak), and all exposed surfaces French polished and fixed all as shown in drg and as specified and as directed. FD-236 |
| 27 | TABLE DINING (1200 X 900X760 mm)M&L for removal of existing damaged top of table dining 6 persons complete and replacing the same with new top made of 18mm thick prelaminated particle board (Novopan/Kitply/Greenply/ Ecoboard/ Archidlam/Bhutan)(exterior grade) of teak facing one side of size 900 mm x 1200 mm with 4mm thick teak wood beading on all four sides, French polishing on teak wood edging and fixed complete all as shown in drg and as specified and as directed.FD-273 |
| 28 | M&L for removal of existing damaged legs of table dining and replacing with new leg made to shape out of 722 x 75 x 40mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and French polishing all exposed surfaces and fixed complete all as shown in drg and as specified and as directed.FD-273 |
| 29 | M&L for removal of existing damaged side rail of table dining and replacing with new long rail made to shape out of 1440x 25 x 100mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and French polishing all exposed surfaces and fixed complete all as shown in drg and as specified and as directed.FD-273 |
| 30 | TABLE DINING (900 X 900 X760 mm)M&L for removal of existing damaged top of table dining 3\" x3\" complete and replacing the same with new top made of 18mm thick prelaminated particle board (Novopan/Kitply/Greenply/ Ecoboard/ Archidlam/Bhutan) (exterior grade) of teak facing one side of size 900 mm x 900 mm with 4mm thick teak wood beading on all four sides, French polishing on teak wood edging and fixed complete all as shown in drg and as specified and as directed.FD-291 |
| 31 | M&L for removal of existing damaged legs of table dining and replacing with new leg made to shape out of 760 x 35 x 35 mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and French polishing all exposed surfaces and fixed complete all as shown in drg and as specified and as directed.FD-291 |
| 32 | TABLE CENTRE`-Ditto- all as per Sl item No. 27 here-in-above but new top of size 900 x 450 mm for table centre. FD-274 |
| 33 | `-Ditto- all as per Sl item No. 28 here-in-above but new leg made to shape out of 400 x 60 x 30 mm for table centre. FD-274 |
| 34 | `-Ditto- all as per Sl item No. 29 here-in-above but new long rail of size 20x50x840 mm for table centre (FD - 274) |
| 35 | `-Ditto- all as per Sl item No. 29 here-in-above but new short rail of size 20x50x440 mm for table centre (FD - 274) |
| 36 | TABLE BED SIDE `-Ditto- all as per Sl item No. 27 here-in-above but new table top of size 450 x 230 mm for table bed side.FD-276 |
| 37 | M&L for removal of existing damaged any one of the two sides of table bed side and replacing the same with new side using 18mm prelaminated particle board (Novopan/Kitply/Greenply/Ecoboard/ Archidlam/Bhutan) of size 230 x 510 mm with teak facing on one side and 4mm teak wood beading on the front edge including French polishing on wooden parts and fixed all as shown on drg and as specified and as directed. FD-276 |
| 38 | M&L for removal of existing damaged back ply of table bed side and replacing the same with new 6 mm thick commercial ply (Make-Kit ply/Century/Indian Plywood (Anchor) of size 450 x 510 mm including French polishing on wooden parts and fixed all as shown on drg and as specified and as directed. FD-276 |
| 39 | CHAIR DINING CUSHIONEDS&F450x65x25mm size Teak wood front/side rail of chair dinning cushioned, fixed to main frame and legs of chair dinning (Drg No FD/E6/MAP/10), apply two coats of French polish to new front/side rail to match with existing and apply a coat of French polish to other parts of chairincluding taking out broken/unserviceable front/side rail complete all as specified and as directed. |
| 40 | S&F450x50x35mm size Teak wood front legof chair dinning cushioned\", fixed to main frame of chair dinning (Drg No FD/E6/MAP/10)), apply two coats of French polish to new leg to match with existing and apply a coat of French polish to other parts of chair including taking out broken/unserviceable front leg complete all as specified and as directed. |
| 41 | S&F75mm thick, 40 density foam seat (Make-Kurl-on),covered with fabric of approved colour suitable for chair dinning officers\" (Drg No FD/E6/MAP/10)), fixed to 12mm thick commercial plywood(Make-Kit ply/Century/Indian Plywood (Anchor) including taking out old unserviceable cushion seatcomplete all as specified and as directed. |
| 42 | CANNING FOR ALL TYPE CHAIRS M&LCanningchair dinning, chair writing, chair easy, chair pedestal, Chair Verandah etc. with new plastic cane ofsize 1.8x0.46mm and boarderwith 3.0x0.60mm size cane (Make-Shiva plastic/Swastik/shah cane) as per Godrej Pattern after tightening the loose chair/stool duly French polishing the structures of chair/stool including taking out old/damaged plastic cane from the aforesaid furniture’s andcleaning the entire surface of furniturecomplete all as specified and as directed. |
| 43 | POLISHING FOR ALL WOODEN FURNITURE M&L preparation of old treated wooden surfaces ofChair writing as per drawing No-FD-20/280and applying two coats of French polish complete all asspecified and as directed. |
| 44 | M&L preparation of old treated wooden surfaces of Chair Easy as per drawing No- FD-17/229and applying two coats of French polish complete all as specified and as directed. |
| 45 | M&L preparation of old treated wooden surfaces of Chair Dining as per drawing No- FD-16/279and applying two coats of French polish complete all asspecified and as directed. |
| 46 | M&L preparation of old treated wooden surfaces of Chair Dining (MAP)and applying two coats of French polish complete all asspecified and as directed. |
| 47 | M&L preparation of old treated wooden surfaces of Table Bed sideas per drawing No-FD-28/276and applying two coats of French polish complete all asspecified and as directed. |
| 48 | M&L preparation of old treated wooden surfaces of Table Dining, 1200x900mm size, as per drawing No-FD 273and applying two coats of French polish complete all asspecified and as directed. |
| 49 | M&L preparation of old treated wooden surfaces of Table Centre,as per drawing No- FD-214/274and applying two coats of French polish complete all asspecified and as directed. |
| 50 | M&L preparation of old treated wooden surfaces of Table Pegas per drawing No- FD-25/277and applying two coats of French polish complete all as specified and as directed. |
| 51 | M&L preparation of old treated wooden surfaces of Table Dining3\" x 3\"as per drawingNo-FD-291and applying two coats of French polish complete all asspecified and as directed. |
| 52 | ALMIRAH LARGE / SMALL/ MEDIUM WITH SHELVES & 1/2 HX1/2 SHELVESM&L for cutting / removing the following corroded / unserviceable parts of Almirah small steel / Almirah large steel & replacing with new parts duly fixed complete all as specified, shown on drawing and as directed :- FD-1031/1032/1033/350/351 M&L for Brass chromium plated handle, 100 mm long, as per Godrej Pattern including taking down of old handle complete all asspecified and as directed. |
| 53 | M&L for One side leg of Almirah steel, left or right, 70 mm wide and 100 mm high, open ends bent outwards up to 15 mm, covering the ends of channel with 70 x 100 mm MS sheet, 1.6 mm thick, welding the channel to bottom of almirah at 50 mm from the side of almirah including 2 coats of synthetic enamel paint, colour of paint including taking down of old leg complete all as specified and as directed. |
| 54 | M&L for 3 way locking device as per Godrej pattern, fully operational with the existing handle. |
| 55 | M&L Steel cup board lock, 50 mm size, 6 lever with stainless steel keys in duplicate as per Godrej pattern. |
| 56 | LOCKER STEEL FD - 257/1029M&L for cutting / removing the following corroded / unserviceable parts of Locker Steel & replacing with new parts duly fixed complete all as specified, shown on drawing and as directed :-FD-257/1029M&L Bow handle, chromium plated steel, 100 mm long fixed to each shutter including taking down of old handle complete all asspecified and as directed. |
| 57 | M&L New Safety type hasp & staple, chromium plated steel of size 75x40x3mm including taking of old hasp & Staple complete all asspecified and as directed. |
| 58 | M&L Chromium plated steel tower bolt, 50 mm size welded to top or bottom of right shutter including taking down of old tower bolt complete Make (ISI ), all asspecified and as directed. |
| 59 | M&L Chromium plated steel conduit pipe, 20 mm dia, 1.6 mm thick, 380 mm long, fixed to existing pair of sockets on the upper portion of the left chamber including taking down of old conduct pipe complete all as specified and as directed. |
| 60 | CHAIR VERANDAH FD - 256M&L for cutting / removing the following corroded / unserviceable parts of Chair verandah & replacing with new parts duly fixed complete all as specified, shown on drawing and as directed :-FD-256M&L for replacing worn out corroded frames at bottom of front of rear leg or handle portions with new 20 mm dia 16 G steel conduit of minimum length 150 mm, duly welded to the existing frame.Each leg at the bottom to be provided with hard rubber toes, chair verandah to be given 2 coats of synthetic enamel paint (white colour) over a coat of red oxide or zinc chromate primer complete to match with rest of the item, all as specified and as directed. |
| 61 | GI CHARPOY WITH PLY TOPRemoving existing damaged/unserviceable plywood 12mm thick from GI Charpoy and supply and fix new 12mm thick plywood BWR grade of size 2100mmx900mm fixed with flat head nut, bolt of size 6mm dia 75mm long with 3mm thick washer (Total 08 Nos per charpoy) duly drilling hole in ply wood and steel frame of charpoy (2 Nos each to long rails and 02 Nos each to short rails) all as specified and shown on drawing or as directed. Make Green Ply, Century & Kit Ply. |
| 62 | Removing existing unserviceable long rails from charpoy GI pipe and supply and fixing with new long rails of size 1890mm made out of GI tube 32mm dia medium grade including cutting / threading and fixing to GI charpoy to bring it to the existing shape and size, all as specified and shown on drawing or as directed. Make of GI tube-TATA/JINDAL/SURYA/ PRAKASH. |
| 63 | Removing existing unserviceable short rails from GI charpoy and fixing short rails of 810mm of GI tube 32mm dia medium grade (converted from retrieved long rails of GI charpoy) including necessary cutting, threading and fixing to GI charpoy as per existing shape and size, all as specified and shown on drawing or as directed. (Note: GI pipe retrieved from serial No 28 above shall be reused under this item.) |
| 64 | Removing existing unserviceable legs from GI charpoy and fix new legs of size 392mm of GI tube 32mm dia medium grade (converted from retrieved short rails of GI charpoy) including necessary cutting, threading and fixing to GI charpoy as per existing shape and size, all as specified and shown on drawing or as directed. (Note: GI pipe retrieved from serial No 29 above shall be reused under this item) |
| 65 | Removing existing unserviceable elbow and supply and fix new three way GI elbow (ISI marked) suitable for 32mm bore GI pipe all as specified and shown on drawing or as directed. |
| 66 | Removing existing unserviceable check nuts from long rail and supply and fix new check nuts 6mm thick 32mm dia in its existing position , all as specified and shown on drawing or as directed. |
| 67 | Removing existing broken/damaged MS square tube 25mm 16 gauge as in stiffener and supply new MS square tube 25mm 16-gauge stiffener of 900mm long welded both sides at equal distance to long rail and painting two coats of synthetic enamel paint black colour over a coat of red oxide to the stiffeners, all as specified and as directed. |
| 68 | CHARPOY IP WITH HARD TOPM&L12mm thick BWR grade plywood ISI marked as in charpoy hard top, screwed to 25x25x1.25mm thick MS square tube (Drg No FD/MAP/II/01) including taking out old unserviceable plywood complete all as specified and directed. Make : Kit ply, Green Ply, Century |
| 69 | M&L 25x25x1.50mm thick MS square tube, 850mm long, as in stiffener of charpoy with hard top,welded to long rail (Drg No FD/MAP/II/01)including taking out old unserviceable MS tube complete all as specified and directed. |
| 70 | S&F70x25x6mm thick MS plate, welded to frame of charpoy hard top to support ply top (Drg No FD/MAP/II/01) applying two coats of synthetic enamel paint colour black over a coat of red oxide including taking out old unserviceable MS flat complete all as specified and as directed. |
| 71 | CHAIR SCHOOL WITH HAND BOARDM&L 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in 585x300mm size writing board of chair school with hand board (Drg No FD/E6/MAP/05), including teak wood edging all round, duly French polished, screwed to existing 25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame including taking out old unserviceable writing board complete all as specified and as directed. |
| 72 | S&F PVC inner shoe suitable for 25mm dia MS pipe leg of chair school(Drg No FD/E6/MAP/05) complete all as specified and as directed. |
| 73 | TABLE BEDSIDEM&L 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as in side/front/back/drawer of table bedside with teak wood edging (Drg No FD/MAP/15(R)), including taking out old unserviceable board complete all as specified and as directed. Make Green Ply, Century & Kit Ply. |
| 74 | S&F 50mm long,brass,chromium plated, handle suitable for table bed side including taking out old unserviceable handle complete all as specified and as directed. |
| 75 | RACK SHOE STEEL (MAP)M&L for re-fixing of worn-out of Jali shelf with gas welding machine either peripheral side or in between area as required, and painting with Black synthetic enamel paintto match with rest of the item, all as specified and as directed. |
| 76 | S&F PVC inner shoe suitable for 25mm dia MS pipe leg of Rack shoe steel (MAP) (Drg No FD/E6/MAP/02 (R) complete all as specified and as directed. |
| 77 | PAINTING OF STEEL FURNITUREM&L preparation of old treated steel surfaces of Almirah medium with shelves as per drawing No FD-243/350/1032 and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . |
| 78 | M&L preparation of old treated steel surfaces of Locker bed side as per drawing No FD-127(M)/1029 and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . |
| 79 | M&L preparation of old treated steel surfaces of Charpoy IP w/ hard top (MAP) and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . |
| 80 | M&L preparation of old treated steel surfaces of Table Bed side steel (MAP) and applying a coat of synthetic enamel paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . |
| 81 | M&L preparation of old treated steel surfaces of Chair Verandah as per drawing No FD-256 and applying a coat of synthetic enamel white paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . |
| 82 | M&L preparation of old treated steel surfaces of chair school with hand board as per drawing and applying a coat of synthetic enamel black paint complete all as specified and as directed. Make: Asian Paint, Berger Paint, Nerolac Paints . |
| 83 | M & L preparation of old treated steel surfaces of Rack Shoe steel MAP as per drawing and applying a coat of synthetic enamel black paint complete all as specified and as directe4d. Make: Asian Paint, Berger Paint, Nerolac Paints . |
