Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc, but excluding Ashlar Facings, dressed Stone Work and Pre-cast Concrete Articles of any descriptions, complete all as specified and as directed. |
| 2 | Dismantling Timber Scantlings, 40 Sqcm and over in Section, in any Position, in Unframed Work, complete all as specified and as directed. |
| 3 | Dismantling Timber Fillets, Rails, Posts, Rafters, Purlings, etc., under 40 Sqcm in Section, in any Position, as in framed Work, complete all as specified and as directed. |
| 4 | Taking down shutters of any description n. exc. 1.00 Sqm each and removing from site or to store as directed by Engineer in charge. |
| 5 | Taking down shutters of any description exc. 1.00 Sqm but n.exc 2 Sqm each and removing from site or to store as directed by Engineer in charge. |
| 6 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm complete all as specified and directed. |
| 7 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 8 | Taking down PVC door chowkats or frames with PVC shutter exc. 1.00 Sqm and n.exc 2 Sqm each complete all as specified and directed. |
| 9 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debris/ rubbish, etc., complete all as specified and as directed. |
| 10 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 11 | Taking down rolling shutter of any description and size complete all as directed by Engr- in- Charge. |
| 12 | Dismantling 100mm bore Cast iron pipe, jointed in cement mortar in foul places including necessary scaffolding upto any height complete all as specified and as directed. |
| 13 | Dismantling Plain or Corrugated Steel Sheeting any gauge, thickness, including nainital or similar roof coverings/sunshade, complete all as specified and as directed. |
| 14 | Taking down soil/ rainwater pipes (any size or pattern) including all fittings heads shoes bends swan necks etc. including cleaning and refixing or removal to store (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed. |
| 15 | Dismantling wrought iron or mild steel work viz steel window, ventilator, guard bars etc of any description not otherwise provided for complete all as specified and directed. |
| 16 | M&L Cement Concrete 1:2:4 type(20 mm graded crushed stone aggregate) as in Coping bed plate,hold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed. |
| 17 | M&L Brick work with fly ash bricks designation 75 (kgf/cm2) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 18 | M&L Brick Work with Sub-Class ‘B’ Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed. |
| 19 | M&L Cutting Holes in Brick Walls, built in Cement Mortar for Taking Out or Inserting Holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1as required in exc. Half Brick but not exc. One Brick thick Walls, complete all as specified and as directed. |
| 20 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 21 | M&L Second Class Hardwood in Scantlings clean sawn Timber Framed and fixed complete all as specified and as directed. |
| 22 | S&F Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed. |
| 23 | M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in section Clean swan, secured with Nails, cross sectional area exc 6.0 Sqcm but not exc. 13.0 Sqcm, complete all as specified and as directed. |
| 24 | M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in section Clean swan, secured with Nails, cross sectional area exc 13.0 Sqcm but not exc. 25.0 Sqcm, complete all as specified and as directed. |
| 25 | S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 26 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to chowkhats complete all as specified and directed. |
| 27 | S&F for 2nd class hardwood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009.complete all as specified and directed. |
| 28 | S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009.complete all as specified and directed. |
| 29 | M&L Second Class Hardwood 35mm thick Plain Framed Panelled Door Shutter (any Number of Panels) with Panel of 12mm thick BWP Commercial Ply or Veneered Particle Board with commercial face veneers on both faces and fitted to Wooden Chowkat, complete all as specified and as directed. |
| 30 | S&F Mild Steel Butt Hinges, size of Hinges 75mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed |
| 31 | S&F in repair Mild Steel Butt Hinges, size of Hinges 75mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed |
| 32 | S&FMild Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed |
| 33 | S&F in repair Mild Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed |
| 34 | S&F Aluminum anodized, barrel tower bolts of extruded section, 150 mm long and fixed with steel screws complete all as specified and directed. |
| 35 | S&F in repair Aluminum anodized, barrel tower bolts of extruded section, 150 mm long and fixed with steel screws complete all as specified and directed. |
| 36 | S&F Aluminum anodized, barrel tower bolts of extruded section, 200 mm long and fixed with steel screws complete all as specified and directed. |
| 37 | S&F in repair Aluminum anodized, barrel tower bolts of extruded section, 200 mm long and fixed with steel screws complete all as specified and directed. |
| 38 | S&F Aluminum alloy Handle 100mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed. |
| 39 | S&F in repair Aluminum alloy Handle 100mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed. |
| 40 | S&F Aluminum alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed. |
| 41 | S&F in repair Aluminum alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed. |
| 42 | S&F 250 mm long Aluminum alloy, anodized, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminum alloy and fixed, complete all as specified and as directed. |
| 43 | S&F in repair 250 mm long Aluminum alloy, anodized, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminum alloy and fixed, complete all as specified and as directed. |
| 44 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished as in repair complete all as specified and as directed. |
| 45 | S&F in repairs Steel Slip-on Self Closing Concealed Hingesfixing on cupboard/door/window etc alongwith screw etc complete all as specifeid & directed. |
| 46 | S&F Stainless steel Continuous (Piano) Hinges, width of Flaps (when open) 40mm, bright finish and fixed, as in repair complete all as specified and as directed. |
| 47 | S&F 20 mm dia Fancy type, Chromium Plated colour coated( any coloured) curtain rod fixed to bracket/ pelmet box complete all as specified and as directed. |
| 48 | S&F Chromium platedBracket for curtain rod in any size complete all as specified and as directed. |
| 49 | S&F Aluminium body(extruded section) door closer hydraulically regulated, designation No 2, universal type suitable for door shutters of 701 to 850 mm in width and weight between 61 to 80 kg and fixed as in repair complete all as specified and as directed. |
| 50 | S&F Floor door stopper of steel body and overall length of cover plate 150 mm and tongue anodised with hard drawn steel spring as in repair complete all as specified and directed. |
| 51 | S&F Double action floor springhydraulically regulated, made up of minimum 1.25mm thick aluminiun alloy sheet foundation box, main body with stainless steel cover ,governing piovet made of brass ,other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 52 | S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steelsheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall /sunshade etc, fixed with self tapping screws complete all as specified and as directed. |
| 53 | S&F for refixing of old Pre-painted colour galvalume aluminium zinc coating GI based corrugated steelsheet 0.50mm thick of any colour as in roof covering/ cladding to wall /sunshade etc, fixed with self tapping screws complete all as specified and as directed.Note:- Serviceable roof sheet shall be obtained from dismantling item. |
| 54 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screw complete all as specified and directed. |
| 55 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. and similar work complete all as specified and directed. |
| 56 | M&L Mild Steel Flat Iron 25 x 3 mm, as in Holdfast for Door, Window Frames or Chowkats etc., cut to length or drilled hole and fixed with Screw, etc., grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 57 | S&F in repair Aluminium door with powder coated anodized aluminium frame of sectionsize 101.60 mm x 44.75 mm x 2.4 mm (jindal section 14021) thick, with shutter of style member size of 85mm x 44.45 x 2.00mm thick (Jindal section 19560), Top/bottom rail of member size 114.30mm x 44.45 x 2.15mm (Jindal section 19574) and lock rail of member size 100mm x 44.45mm x 2.0mm thick (jindal section 19564) with rubber gasket and aluminium glazing clip beading and 100mm mortice locking arrangement ,handle, tower bolt 200mm long per shutter, rollers, etc completeall as specified and directed. |
| 58 | S&F in repair Powder coated aluminium 50 micron anodised three way track sliding windows of frame size 92mm x 31.75mm x 1.5mm thickness weight of 1.07Kg/m (Section No 20831 of jindal) and f shutter size 40mm x 18mm (with 9.00 mm interlocking legs) x 1.45 mm thickness (section no 20737 of jindal) Section two shutter glazed,covering half of span of opening each & one shutter section covering half of span of opening) including provn for making window air light including 95mm aluminium handle with spring lock, stainless steel wirecloth 0.45 mm nominal dia of wire and average width of apperture 1.4mm and fixed with steel wire staples 5 mm thick plain glasse including necessary fitting and fixturre, aluminium snap beading complete all as specified and directed.Note - Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixture and no cost extra shall be paid separately cost of glass and wire cloth included herein before. |
| 59 | M&L Powder coated aluminium 50 micron anodised partition consist of single groove rectangular section 101.60 x 44.45 x 1.60mm (Section of jindal wt @ 1.301 kg/rm) and double groove rectangular section 101.60 x 44.45 x 1.50mm (Section No 20028 of jindal wt @ 1.301 Kg/rm) including jointing cleats and glazing clips for fixing builder hardware fittings and half portion covered with 5.5 mmthick selected quality frosted or plain glass balance portion covered with 4mm thick ACP sheet including necessary fittings/fixture/aluminium snap beads, sleats etc complete all as specified and directed. |
| 60 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5 mm thick PVC sheet fillet of width 35mm for wall Paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing including taking down old unserviceable PVC wall lining complete all as specified and as directed. |
| 61 | S&F Steel rolling shutters 1.0mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated push pull or manual type etc as complete all as specified and as directed. |
| 62 | S&F Safety lever locks mild steel with 4 levers for rolling shutterscomplete all as specified and as directed. |
| 63 | S&F Ball bearing for rolling shutters complete all as specified and as directed. |
| 64 | S&F MS locking plate of standard size and shape from approved quality with a coat of red oxide primercomplete all as specified and as directed. |
| 65 | S&F Spring of rolling shutter of approved quality and size complete all as specified and as directed. |
| 66 | M&L Prelaminated particle board 18/19mm thick as in cup board shutter and Shelf, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works including taking down old unserviceable particle board complete all as specified and as directed. |
| 67 | M&L False ceiling with \"E\" board \"Classic\" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/tiles with aluminium anodised main \"T\" section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 6mm dia GI hooks and clampand applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces as in repair complete all as specified and as directed. |
| 68 | M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqmin Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortarcomplete all as specified and as directed. |
| 69 | M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqmin Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortarcomplete all as specified and as directed. |
| 70 | M&L Vitrified Ceramic Tiles 8-9 mm thick (square/ rectangular) in dark Shade, Polished, area of each tile not exc 0.36 sqm as in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 20mm thick screed bed in cement sand mortar (1:6) complete all as specified and as directed. |
| 71 | M&L Glazed Ceramic Coloured 600 x 300 x 7-8mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layerin cement mortar (1:4) complete all as specified and as directed. |
| 72 | M&L Glazed Ceramic Coloured 450 x 350 x 7.0mm/350 x 200 x 7.0mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layerin cement mortar (1:4) complete all as specified and as directed. |
| 73 | M&L Granite (of any type) Work (Table rubbed and polished) 18 to 20 mm thick, in Steps, Cooking Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with admixture of Pigment to match with Shade of Granite including Cutting and Polishing including half round edges, complete all as specified and as directed. |
| 74 | M&L for 5 mm thick plaster n.exc. 3 sqm each patch on brick or concrete surfaces of wall in CM 1:3 and finished even and smooth without using extra cement complete all as specified & directed. |
| 75 | M&L 15mm thick plaster n.exc. 3 sqm each patch in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed. |
| 76 | M&L Preparing old decorated Plaster Surfaces of Ceiling and applying one Coat of White Wash, complete all as specified and as directed. |
| 77 | M&L Preparing new Surfaces of Ceilng and applying Three Coats of White Wash, complete all as specified and as directed. |
| 78 | M&L Preparing old decorated Plaster Surfaces of Wall and applying One Coat of oil bound distemper (any colour /tint) complete all as specified and as directed. |
| 79 | M&L preparing new plastered surfaces of wall and and applying Two Coats of Distemper Oil Emulsion over a coat of primer over andapplied over 2mm thick water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and as directed. |
| 80 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls andapplying Two Coats of DistemperOil Emulsionover a coat of primer andapplied over 2mm thick water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 81 | M&L Preparingold decorated plastered surfaces of Walls and applying OneCoats of Exterior Emulsion Paint Weather Coat (any colour /tint)(as per Manufacturer’s instructions), complete all as specified and as directed. |
| 82 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls andapplying Two Coats of Exterior Emulsion Paint Weather Coat over a coat of alklai resistance Primer (as per Manufacturer’s instructions), andapplied over 2mm thick water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 83 | Preparing old decorative Surfaces of walls and applying one Coat of cement base paint complete all as specified and as directed. |
| 84 | S & F in repair, 4.00mm thick selected quality tinted sheet glass ,glazing ,fixed with including necessary joining cleats,glazing clips, ruber neoprene packing etc in any type of Aluminum Windows, Aluminium Ventilators, Aluminium Louvers complete all as specified and directed.Note : Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to twelve storeys height of bldgs. |
| 85 | S & F in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including if required fixing with wooden beads or MS flat of size 15mmx3mm & chromium plates screws/using metal nut and bolts or wooden beading,aluminium window fittings,neoprine rubber gasket etc if required including necessary scaffolding up to twelve storeys height of bldgs complete all as specified and directed |
| 86 | M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 87 | M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 88 | Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel plaint over a coat of red oxide all as specified and directed by Engineer-in-Charge. |
| 89 | Supply and Laying Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including taking down old unserviceable tubes and deposit to store complete as all specified and as directed. |
| 90 | Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including taking down old unserviceable tubes and deposit to store complete as all specified and as directed. |
| 91 | Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including taking down old unserviceable tubes and deposit to store complete as all specified and as directed. |
| 92 | M&L for taking down and refixing of old Steel Water Tubing 15mm Bore (dia), and connections with all new Fittings such as bends, elbows, tees, short pieces, connectors, back nut, reducer, diminishing pieces, caps, unions and plugs etc but except Steel tube connection, in new or old position such as fixed on Walls, Ceiling or laid in Floors or any other Situation, cleaning the same or deposit to store complete as all specified and as directed. |
| 93 | M&L for taking down and refixing of old Steel Water Tubing 20mm Bore (dia), and connections with all new Fittings such as bends, elbows, tees, short pieces, connectors, back nut, reducer, diminishing pieces, caps, unions and plugs etc but except Steel tube connection, in new or old position such as fixed on Walls, Ceiling or laid in Floors or any other Situation, cleaning the same or deposit to store complete as all specified and as directed. |
| 94 | M&L for taking down and refixing of old Steel Water Tubing 25mm Bore (dia), and connections with all new Fittings such as bends, elbows, tees, short pieces, connectors, back nut, reducer, diminishing pieces, caps, unions and plugs etc but except Steel tube connection, in new or old position such as fixed on Walls, Ceiling or laid in Floors or any other Situation, cleaning the same or deposit to store complete as all specified and as directed.Note for item no. 94.00 & 97.00:- (i) Steel tube retrived from taking down or issue from store shall be reused.(ii) Serviceable steel tube obtained shall be reused after cleaning.(iii) Un-serviceable steel tube shall be deposited to store. The same shall be the property of contractor and take over by contractor through Schedule of Credit. |
| 95 | S&F work in repair for 20mm outer dia of CPVC water tubes SDR 11 with all fittings SDR 11 and fixed complete to walls and ceilings or laid in floors including taking down of old pipe complete all as specified and directed |
| 96 | S&F work in repair for 40mm outer dia of CPVC water tubes SDR 11 with all fittings SDR 11 and fixed complete to walls and ceilings or laid in floors including taking down of old pipe complete all as specified and directedNotes for item Nos.98.00 to 99.00:- Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to four storeys height of bldgs. |
| 97 | M&L Cutting chase, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of laddings, steps, cills, sushades, shelves, lintels etc and cutting chase for concealed water tubing or concealed coduit wiring etc and making good cutting grith n exc 10 cm girth on brick walls complete all as specified and directed. |
| 98 | S&F 20mm bore brass MTA for CPVC pipe as in repair complete all as specified and directed. |
| 99 | S&F 20mm bore brass FTA for CPVC pipe as in repair complete all as specified and directed. |
| 100 | S&F 40mm bore brass MTA for CPVC pipe as in repair complete all as specified and directed. |
| 101 | S&F 40mm bore brass FTA for CPVC pipe as in repair complete all as specified and directed. |
| 102 | S&F 20mm bore brass elbow for CPVC pipe as in repair complete all as specified and directed. |
| 103 | S&F 40mm bore brass elbow for CPVC pipe as in repair complete all as specified and directed. |
| 104 | S&F 20mm bore brass Tee for CPVC pipe as in repair complete all as specified and directed. |
| 105 | S&F 40mm bore brass Tee for CPVC pipe as in repair complete all as specified and directed. |
| 106 | S&F 25mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed as in repair complete all as specified and directed. |
| 107 | S&F 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed as in repair complete all as specified and directed. |
| 108 | Supply and fix Gun metal, globe or gate valves (ISI marked) ( Class-I) with iron wheel head, screwed both ends for 20 mm bore GI pipe including taking down old unserviceable one complete as specified and as directed |
| 109 | Supply and fix Gun metal, globe or gate valves (ISI marked) ( Class-I) with iron wheel head, screwed both ends for 25 mm bore GI pipe including taking down old unserviceable one complete as specified and as directed |
| 110 | Supply and fix Gun metal, globe or gate valves (ISI marked) ( Class-I) with iron wheel head, screwed both ends for 40 mm bore GI pipe including taking down old unserviceable one complete as specified and as directed |
| 111 | S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 112 | S&F PVC (SWR) Bend 110mm bore (dia), any type, and Jointing with Solvent Cement, complete all as specified and as directed. |
| 113 | S&FPVC (SWR) Junction 110mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed. |
| 114 | S&F UPVC (SWR) 110mm bore Branch pieces, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches or fitted with oval access doors and Jointing with Solvent Cement complete all as specified and directed. |
| 115 | Supply and fix 40 mm dia PVC pipe with bend complete fixed on walls, ceilings and floors including GI/PVC clamps, bends sockets etc incl taking down unservicable old PVC pipes complete all as specified and directed. |
| 116 | S&F Cast Iron Nahani Trap with 100mm bore (dia) Outlet, with Gratings including jointing to Waste Pipe and fixed in Cement Concrete 1:2:4 (20mm graded aggregate), as in repair complete all as specified and as directed. |
| 117 | S&F Cast Iron Floor Trap with 100mm bore (dia) Outlet, with Gratings including jointing to Waste Pipe and fixed in Cement Concrete 1:2:4 (20mm graded aggregate), as in repair complete all as specified and as directed. |
| 118 | S&F Cast Iron Soil, Waste and Vent Pipes 100mm bore (dia), Sand Cast, in any Length with or without Ears, with Cement Joints in Cement Mortar 1:1, fixed to Walls, complete all as specified and as directed. |
| 119 | Refixing of old Cast Iron Soil, Waste and Vent Pipes of any size,in any Length with or without Ears, with Cement Joints in Cement Mortar 1:1, fixed to Walls, complete all as specified and as directed.Note:- Serviceable pipe shall be obtained from dismantling item. |
| 120 | S&F work for Cast iron 100mm bore bend any radius complete all as specified and directedNote:- Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to four storeys height of bldgs. |
| 121 | S&F 32mm bore PVC waste pipe flexible type including all cups and sockets with minimum length 800mm for any type/make/size for stainless steel sinks, basins,urinal etc as in repair complete all as specified and directed. |
| 122 | S&F 32 mm dia Flush pipe of low/high density polyethylene pipe as directed including jointing to any type of WC and any type/size/make of low level flushing cistern and make good dismantle floor to match the existing surfaceas in repair complete all as specified and directed. |
| 123 | S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 500Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash, float valveand overflow pipe including PTMT Ball Valve 25mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, and including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 124 | S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 1000Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash, float valveand overflow pipe including PTMT Ball Valve 25mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, and includingLowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 125 | S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 2000Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash, float valveand overflow pipe including PTMT Ball Valve 25mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, and including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 126 | S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with \"p\" or \"s\" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat bottom cover (coloured) fixed with mild steel chromium plated or aluminium hinging device including taking down old unserviceable one complete all as specified and as directed. |
| 127 | S&F in replacement Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding complete all as specified and as directed. |
| 128 | S&F Vitreous china wash hand basin,oval undercounter base white size 480x400x100mm flat back typeexcluding32mm dia Brass Chromium Plated Waste Fitting and 15mm dia PVC connector pipe and tap ,but including a pair of Cast Iron Brackets duly painted Stand including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. |
| 129 | S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. |
| 130 | S&F Brass chromium plated fancy type bib cockscrewed for 15 mm bore of pipeetc. as in repair complete all as specified & directed. |
| 131 | S&F Brass chromium plated fancy type stop cockscrewed for 15 mm boreof pipeetc.incl necessary fittings & fixtures as in repair complete all as specified & directed. |
| 132 | S&F Brass chromium plated fancy type pillar tapscrewed for 15 mm boreof pipeetc.incl necessary fittings & fixturesas in repair complete all as specified & directed. |
| 133 | S&FTwo way bib cockwith flange brass chromium plated fancy type screwed for 15 mm bore etc.as in repair complete all as specified and as directed. |
| 134 | S&F Angular Stop cock concealed type ,15 mm dia cast copper alloy chromium plated fancy type with wall flange screwed for iron pipe etc. as in repair complete all as specified and directed. |
| 135 | S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed. |
| 136 | Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. |
| 137 | S&F cast copper alloy health faucet with chomium plated with flexible cord fixed on wall screwed down for iron pipes,including necessary fittings etc as in repair complete all as specified and as directed. |
| 138 | S & Fin repair for Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and colour as directed |
| 139 | S&F Towel ring of size 150mm dia decorative type fixed with walls including necessary fittings etc as in repair complete all as specified and as directed. |
| 140 | S&F CP Towel Rail 600mm Long fixed with and including CP brass screws and wooden / plastic cleats complete all as specified and as directed. |
| 141 | S&F Toilet paper holder of brass chromium plated fixed to walls with chromium platedbrass screw including necessary fixing arrangement as in repair complete all as specified and directed. |
| 142 | S&F Chromium Plated soap dish fixed to wall with necessary fixing arrangementas in repair complete all as specified and directed |
| 143 | S&FGlass shelf assembly consisting of 5.5 mm thick sheet glass self 19-12 cm wide,60 cm long with chromium plated brackets guard andrailing fixed in position with necessary fixing arrangement as in repair complete all as specified and directed. |
| 144 | S&F Mirror Bevelled Edge 600x450mm, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Ply-wood and fixed to Wooden Plugs with Chro-mium Plated Brass Screws and Cup Washers including Taking down unserviceable Mirror, complete all as specified and as directed. |
| 145 | S&F Mirror Bevelled Edge 900x600mm, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Ply-wood and fixed to Wooden Plugs with Chro-mium Plated Brass Screws and Cup Washers including Taking down unserviceable Mirror, complete all as specified and as directed. |
| 146 | S&F PVC connection pipe 15mm size with PTMT nuts of length 600mm long as in repair complete all as specified and directed. |
| 147 | S&F in repair CP connector for hot water supply of size 600 fixed to 15 mm GI pipe complete all as directed. |
| 148 | M&L for Repairs to any type of Aluminium Doors, AluminiumWindows, Aluminium Ventilators, Aluminium Louvers, Aluminium CB shutters etc of any description, in any situation by taking down & refixing shutter including replacement ofrubber neoprene packing, aluminum snap beading, screws & tightening, adjustment etc ,making smooth functioning (proper closing, opening) etc with entire satisfaction of Engineer-in-charge complete all as specified and directed. |
| 149 | M&L for Repair for joint leakage in steel water tube by replacing of GI elbow/socket/reducers/nipple/union/bend/tee of any length 15mm bore medium grade ISI mark of complete all as directed. |
| 150 | M&L for Repair for joint leakage in steel water tube by replacing of GI elbow/socket/reducers/nipple/union/bend/tee of any length 20mm bore medium grade ISI mark of complete all as directed. |
| 151 | M&L for Repair for joint leakage in steel water tube by replacing of GI elbow/socket/reducers/nipple/union/bend/tee of any length 25mm bore medium grade ISI mark of complete all as directed. Notes for item No.154.00 to 156.00: 1. Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to four storeys height of bldgs being external works of building. 2.Cost of taking down steel water tube & refixing old steel water tube and connection in new or old position with new fixing arrangment in walls, ceiling, floors etc Shall be included in the rates quoted by the contractor. |
| 152 | M&L in repairs for leaking water in brass/CP bib tap, pillar tap, concealed stop cock, angle valve of any make/ description/size in any position by replacing the (brass spindle+brass jumper washer) ,tightening of fittings etc ,also removing air lock, blockage in water pipe line & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed |
| 153 | M&L in repairs for (PVC Syphon assembly (internal kit) for any type/size/make of low level flushing cistern,tightening of fittings etc & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed. |
| 154 | M&L in repairs for (PVC Syphon assembly (internal kit) for any type/size/make of cascade commode flushing cistern,tightening of fittings etc & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed. |
| 155 | Cleaning of blocked kitchen trap / nahani trap / floor trap/ Water closet of any type / pattern with vaccum pump upto 1st manhole and making the drain channel fully functional by flushing with sufficient quantity of water to entire satisfaction of Engineer-in-Charge including cleaning of 1st manhole and removing the waste materials / sludge etc to a distance outside residential area and burying the same in a pit and spreading bleeching powder surrounding the area @ 1Kg/ Sqm and sealing the top with fine sand of suitable depth complete all as specified and as directed.Note:-(i) Cost of earth work in excavation required for digging the borrow pit and burrying the the waste materials / sludge in the borrow pit and sealing the pit with fine sand and spreadind of bleeching powder shall deemed to be included in the rate quoted.(ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge. |
| 156 | Cleaning of under rain water / waste pipe of any dia by rodding / bamboo split including removing and refixing of eye cover in exesting position and taking out waste and foreign materials and flushing with sufficient quantity of water etc. and cutting of the bushes both side of sewage line upto 0.5 mtr each side and throwing the waste materials into non residential area or near by drain / nallah and including cutting the bushes surrounding the sewage line upto 0.50m complete all as specified and as directed.Note:-(i) Once cleaned the sewage lines, the Contractor shall maintain the lines functional upto the date of Completion at his own cost.(ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Enginner-in-Charge. |
| 157 | Taking down existing broken inspection eye cover from soil/waste/rain water pipe from any height any position and supply and fix new CI eye cover with rubber washer and nut bolts for 100/75 mm dia pipe incl necessary scaffolding and safety measurers complete all as directed by Engineer-in-Charge. |
| 158 | Disconnecting existing tanksof capacity exc 250 but not exc 500 liters setting aside (or lowering, hoisting if required) for repairs & scrubbing cleaning, thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of PVC/RCC water storage tanks (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required and removing vegetation around the over head tank after opening tank cover, inlet, outlet etc and reconnecting with GI/CPVC tubing and re-fixing in position ,refixingthe tank including cover after cleaning in position , write date of cleaning by synthetic enamel paint on tankcomplete all and specified and directed. |
| 159 | S & F in repair PVC tank lid/cover for water storage tank capacity of 250 to 2000 ltrs to matching with existing tank with fixing arrangementcomplete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
