Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | S&F Rotational moulded polythene water storage tanks of 1000 ltrs capacity, white three layered (ISI marked) (Cylindrically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including taking down old PVC/RCC tank & removal away from site complete all as specified and as directed. |
| 2 | S&F 20mm PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms complete all as specified and as directed. |
| 3 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store. |
| 4 | All as per item No. 3 specified here-in-above, but 20 mm bore. |
| 5 | All as per item No. 3 specified here-in-above, but 25 mm bore. |
| 6 | S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends,tees,short pieces, nectors,elbows,reducers, union dockets etc & fixed to walls,ceilings, & laid on floors (Concealed) complete all as specified and as directed. |
| 7 | All as per item No. 6 specified here-in-above, but 20 mm bore. |
| 8 | All as per item No. 6 specified here-in-above, but 25 mm bore. |
| 9 | Taking down roof treatment any type any description on top of roof not exceeding 10cm thick including removal of rubbish outside MD land complete all as specified and directed. |
| 10 | Demolition of cement concrete padding of water proofing treatment from roof padding including taking down bituminous polythene sheets, plaster etc, overall thickness nexc 200mm, cleaning of concrete surfaces by wire brushes scrubbing down water and removing the dust debris etc to a distance 50 metre but n exc 250 metre from the site complete all as specified and as directed. |
| 11 | M&L for plain cement concrete 1:2:4 type B-0 (using 12.50mm graded crushed stone agg) over roof for making good depression/undulation and as in roof kerbrounded or chamfered on edges to match the existing , complete all as specified and directed. |
| 12 | M&L for plain cement concrete type B1 1:2:4 (20mm graded crushed stone aggregate) as in coping to parapet walls, in manholes, benching and the like including necessary formwork complete all as specified and as directed. |
| 13 | M&L for carrying out water proofing treatment for roof in following stages : (1) M&L for neat cement slurry @ 3.00 Kg/Sqm and screed bed / bedding layer of 10mm thick in CM 1:4 mixed with integral water proofing compound as per manufacturer\"s instructions over the concrete surfaces finishing the surface even and smooth without using extra cement.(2) Applying a coat of bituminous primer confirming to IS 3384 @ 0.30Kg/Sqm over plastered surfaces. (3) Applying one coat of bonding material using blown type bitumen confirming to IS:702 grade 85/25 @ 1.20Kg/Sqm(4) Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete all as specified and directed.Note : 1. A information tablet will be put up in the front side wall of the buildings where this work will be done. All building/ structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE. 2. WPC shall be measured and paid separately under respective item. |
| 14 | S&F mild steel framed work as in guard bars brackets & supports for sunshades of roof slabs etc for jacketing around columns, as in railings, supports for cooler platforms & the likes etc using MS angle iron, square pipes, flat iron, MS plates & bolts etc incl necessary welding in position complete all as specified and directed. |
| 15 | Taking down carefully cement concrete / spalled out concrete from RCC roof projections, ceilings, sunsheds, beams etc upto cover depth by chipping out lightly including necessary scaffolding etc complete all as specified and directed. |
| 16 | M&L for cleaning the existing reinforcements of slabs, chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & thoroughly cleaning the surface, complete all as specified and directed. |
| 17 | M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5-2 parts water) mixed with admixture LATEX POWDER mixed @ 5Kg per 50Kg of cement & applying to concrete surfaces @ 200gm/Sqm to obtain tack complete all as specified and directed. |
| 18 | M&L 15-20mm thick rendering in CM 1:1:2 using (1 part of cement, 1 part 2-3mm screenings of stone aggregate & 2 parts coarse sand over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100gm/50Kg of cement & finishing the surface even & rough to receive final rendering coat complete all as specified and directed. |
| 19 | M&L 10-15mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @100gm/50Kg of cement & finishing the surface even & smooth complete all as specified and directed. |
| 20 | S&F GI chicken wiremesh of 0.71mm dia wire & 12mm mesh size fixed with nails & screws around RCC chajjas/fascias etc complete all as specified and directed. |
| 21 | Dismantling cast iron work of any description complete all as specified and directed. |
| 22 | Taking down existing cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 23 | M&L for raking out joints/ pointing to to squared rubble masonry, jodhpur type regular course built in CM 1:3 all as specified. |
| 24 | M&L for rendering 10mm thick in CM 1:4 on fair faces of brick/block surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 25 | M&L for rendering 15mm thick in CM 1:6 on other than fair faces of solid PCC block surface or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | M & L for preparing new plastered surfaces of walls and applying two coat of Oil Bound distemper over 2mm thick wall care putty over a coat of alkali resistant primer and complete all as specified and directed by Engr-in-charge. |
| 27 | M&L for rendering 15mm thick in CM 1: 4 on stone masonary surfaces finished even and smooth without using extra cement using integral water proofing compound as per manufacturer\"s instruction complete all as specified and directed by Engr-in-charge. |
| 28 | M&L for rendering 10mm thick on fair faces concrete surfaces in CM 1:3 and finished even and smooth in ceilings without using extra cement complete all as specified and directed by Engr-in-charge. |
| 29 | M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 30 | M&L for preparation of newly plastered/pointed surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 31 | M&L for preparation of new concrete / masonry surfaces of walls and applying three coats of cement base paint complete all as specified and directed. |
| 32 | M&L for preparation of new concrete / masonry surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 33 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 34 | Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed. |
| 35 | Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 100m or under, beyond the lead or at the sites shown by users, included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. |
| 36 | M&L 18-20 mm thick black granite stone as in WHB counter top, cooking platform, sinks, treads of steps, jambs, pillars, window cills & similar nature works, machine cut, (table rubbed and polished) best quality as per sample, over & including 15 mm thick screeding in CM1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, providing suitabledia hole in the slab for the gas pipe, complete all as specified and as directed. |
| 37 | M&L for non-skid coloured ceramic tiles joint free 7 to 8mm thick (Square/Rectangular)area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floors set and jointed in neat cement slurry and pointed incoloured cement to match complete all as specified and directed. |
| 38 | M&L for 25mm thickPlain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) in sub base, floors, pavings complete all as specified and directed. |
| 39 | M&L for 15 mm thick screed bed or bedding layers in CM (1:4) for laying in floors finishing ,complete all as specified and directed. |
| 40 | M&L for glazed coloured ceramic tiles area exc 450x350x7 / 350x250x7 to 8 mm thick as per IS 13712 grade II(a) over and including 10mm thick backing coat in CM (1:4) set & jointed in neat cement slurry and pointed with coloured cement to match on the vertical surfaces as in dado/skirting (colour & pattern as approved by GE) complete all as specified and directed. |
| 41 | S&F gun metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 42 | S&F gun metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 43 | S&F 15 mm bore bib tap with wall flange and aerator, brass chromium plated with fancy type and screwed down to 15 mm bore GI tubing or for brass ferrule complete all as specified and directed. |
| 44 | S&F angle stop valve with wall flange 15 mm bore of pipe, brass chromium plated, fancy type with long shank and cup, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 45 | S&F 15 mm bore stop valve with wall flange, brass chromium plated, fancy type with long shank and cup, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 46 | S&F in repairs 15 mm bore stop valve with wall flange, brass chromium plated, fancy type with long shank and cup, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 47 | S&F overhead shower rose 150x150mm of ABS body chromium platedwith grey face plate & with arm having swivel joint chromium plated best quality fixed complete all as specified and directed. |
| 48 | S&F 15mm boreCP cast copper alloy body mixer Sink cock with hot & cold mixing valves & casted central spout all as per sample complete all as specified and directed. |
| 49 | S&F CP Hand Shower (Health Faucet) with 80mm dia, 1.2 Mtr long flexible tube & wall hook with N.R.V (Back flow preventer), 15 mm dia complete all as specified and directed. |
| 50 | S&F two way angular stop cock with wall flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed. |
| 51 | S&F in repairs light coloured (ivory) vitreous china, wash hand basin of size 550mm x 400mm flat back with pedestal including bracket, CP waste coupling, flexible waste pipe complete all as specified and directed |
| 52 | S&F vitreous China wash down water closet pan European type pedestal pattern, white with seat (including fixing bolts, flushing cistern and flush pipe)and cover including PVC \"P\" or \"S\" trap, front or back fixed including connection to trap etc and provision of cement concrete bedding and making good to floor complete all as specified and as directed. |
| 53 | S&F Vitreous China Squatting pan of Orrisa pattern, long pan, size 580mm x 410mm white with `P\" or `S\" trap, front or back inlet and integralfoot rests any patternincluding connection to trap and to flushing pipe, anti syphonage pipe etc complete all asspecified and directed. |
| 54 | S&Fof 10 ltrs capacity PVC valve less, ISI Marked syphonic action type, flushing cistern, low level, with Anti Bacterial Knob, with inlet, ball valve, float and handle including brackets, and cistern colour shall be match WC colour, complete all as specified and as directed. |
| 55 | S&F Vitreous China Urinal, bowl type (back or corner wall type), white including providing and fixing of plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and inlcuding 60mm long brass screws, pointing around urinal back in cement mortar including S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms) complete all as specified and directed. |
| 56 | S&F in corner glass shelf 250mm superior quality with CP tubular framing & brackets complete all as specified and directed. |
| 57 | M&L for rounding to edges of stones slabs, such as in steps, cooking platform, and other similar situations etc, complete all as specified and as directed. |
| 58 | S&F MS chromium plated peg set of five fixing with wall complete all as specified and directed. |
| 59 | M&L for 6mm thick bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and directed. |
| 60 | S&F tubular towel rail brass chromium plated fancy type 20mm dia and 60 cm long fixed between flanges complete all as specified and directed. |
| 61 | Dismantling of cast iron of AC / PVC soil, waste & vent pipe jointed in cement mortor of size 110/100mm bore, incld. All fittings, complete all as specified & directed. |
| 62 | All as per item No. 61 here-in-above, but 75mm bore. |
| 63 | Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laidin trenches of suitable size complete all as specified and as directed. |
| 64 | Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laidin trenches of suitable size complete all as specified and as directed . |
| 65 | S&F 75mm bore PVC (SWR) bends provided with access door complete all as specified and as directed |
| 66 | S&F of 110 mm bore (SWR)PVC bends any radius with access door, complete all as specified and directed. |
| 67 | S&F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 68 | S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 69 | S&F 110mm PVC (SWR) WC connector with lip ring complete all as specified and as directed. |
| 70 | S&F 75 mm bore PVC vent cowl complete all as specified and directed. |
| 71 | M&L 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 72 | M&L for PVC (SWR) gully trap 125mm, setting and jointing with solvent cement complete all as specified |
| 73 | Taking down Chowkats or framesnot exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed. |
| 74 | Taking down Chowkats or framesexceeding 1.5 Sq. M each and n exceeding 4.0 Sqm each (Without taking off shutters from the frames) complete all as specified and directed. |
| 75 | Taking down shutters of any description exc 1 Sqm each but n exc 2 Sqm each complete all as specifed |
| 76 | Taking down steel window / ventilator and removed from site complete all as directed. |
| 77 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 78 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 79 | S&F 2nd class Hardwood, Plain, solid, straight chowkatsand frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 80 | S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercialtype on both sides, both faces is covered with decorative face veneer with lipping/frame to match completeall as specified and as directed. |
| 81 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. |
| 82 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: (a)-For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(b)- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 83 | S&F150 mm long Brass barrel tower bolts, with cast or sheetbarrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 84 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed. |
| 85 | S&F 250mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixedcomplete all as specified and directed. |
| 86 | S&F 100 mm long medium weight, cold rolled Stainless steel Butt hinges complete all as specified and directed. |
| 87 | S&F 125 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 88 | S&F 150 mm long extruded Aluminium alloy handles, fabricated type, anodisedcomplete all as specified and directed. |
| 89 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar workconforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 90 | S&F Framed work as in doors or gates of angle or other sectionwith gusset plates, rails, braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to beprepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 91 | M&L for providing cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like includingweathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 92 | M&L for Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified and directed. |
| 93 | M&L for cutting holes in stone walls exc half brick but not exc one brick built in cement mortar or in cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required |
| 94 | S&F powder coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with aluminium section weighing 0.55Kg/m with one or more rebates or for sliding windows (2 track / 3 track), ventilators with louvers having suitable mechanism for tilting, U shaped fillets etc complete all as specified and directed. Note : Glass panes in louvers & stainless steel wirecloth shall be measured and paid for separately. |
| 95 | S&F pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators complete all as specified and directed. |
| 96 | S&F powder coated anodised aluminium door / window / ventilator shutters (minimum thickness of powder coating 50 micron), aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, 2 tower bolts, 1 mortice lock of vertical type brass 4 levers size 65mm and anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 97 | S&F 4.80mm thick tinted plain sheet glass, ordinary quality and glazing with secured in wooden beads or snap fit glazing clips exc 0.5mm sqm each pane complete all as specified and directed. |
| 98 | S&F 4mm thick figured glass, pin head type, in small widths as in louvers of ventilators complete all as specified as directed. |
| 99 | S&F stainless steel wirecloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with anodised aluminium framework of windows/ventilator & door shutters etc complete all as specified and directed. |
| 100 | M&L preparation of steel and steel base surfaces over 10 CM width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 101 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns hooking ends cutting bending and binding with mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and as directed. |
| 102 | All as per item No.101 specified here-in-above, but 6 to 8mm dia bars complete all as specified and as directed. |
| 103 | All as per item No.101 specified here-in-above, but 5mm diaand over upto and including 10mm dia in stirrups, spacers and binders |
| 104 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified. |
| 105 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base to floor, incl well compacting & laid to levels etc, complete all as specified and directed. |
| 106 | Supply and layingmachine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layersof anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thicknessmade by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 107 | M&L Machine cut kota stone slab 20-25 mm thick as in floor (size not less than 580mm x 580mm), treads, steps (single piece), machine cut, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including M&L 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 108 | Supply only integral water poofing compound complete all as specified and directed. |
| 109 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in any type of soil completeall as specified and directed. |
| 110 | All as per item No.110 specified here-in-above, but exceeding 1.50m deep and not exc 3.0m deep complete all as specified and directed. |
| 111 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. |
| 112 | Removal of excavated soil to a distancenot exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 113 | Demolition and breaking up of RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches for 150mm bore of pipe complete all as specified and directed. |
| 114 | M&L for 150 mm dia Reinforced concrete pipes, class NP2 laid and jointed complete with collars drain pipes laid in trenches and jointed completeall as specified and as directed. |
| 115 | M&L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore completeall as specified and directed. |
| 116 | M & L for Precast cement concrete 1:3:6 type C1 (20mm graded aggregate) solid block masonry exc.10 cm in width and setting in cement mortar 1:6 completeall as specified and as directed. |
| 117 | M&L for rendering 15mm thick in CM 1: 4 on concrete or stone masonary surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 118 | M&L for providing precast cement concrete slabs type B1 1:2:4 in landings, factory made cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and directed. |
| 119 | M&L for Framed work as in frames to manhole covers of angle or other section including hold fast confirming Fe410-0, complete all as specified and directed. |
| 120 | M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 121 | Dismantling old abandoned existing manholes any depth with debris and making good to earth omplete all as specified and directed. |
| 122 | Demolition ofbrick / block or stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed. |
| 123 | M&L random rubble stone masonry walling, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed. |
| 124 | All as per item No.124 specified here-in-above, but except stone complete all as specified and directed. |
| 125 | Extra over stone walling for hammer dressingto face stone & dressing of face beds & joints as specified of random rubble walling brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 40mm and dressing face beds and joints, complete all as specified and directed. |
| 126 | M & L Plain Cement Concrete Type C1 1:3:6 (using 20mm graded stone aggregate) in surface channels and drain beds including all necessary formwork completeall as specified and as directed. |
| 127 | Cutting into existing manholes for connecting new drains with 150mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) 1:2:4 type B1 smooth finished & reforming benching as reqd completeall as specified and directed. |
| 128 | S&F 28-30mm thick precast chequered tiles any shape rubberised finish lacquer coated with top 4-5mm with anti abrasive material all as per sample laid over 15mm thick cement sand screed bed in CM 1:4 finished even & rough to receive tiling jointing & pointed in neat cement mixed with pigment complete all as directed at site. |
| 129 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out dense/hard soil complete all as specified and as directed. |
| 130 | M&L for Plain cement concrete 1:4:8 type D-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete, in flooring path, sub foundation etc, complete all as specified and as directed. |
| 131 | M&L RCC M-25 design mix (using 20mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 132 | M&L for RCC M-25 design mix (using 20mm graded stone aggregates) as in columns, pillars, piers, posts and struts and the likecomplete all as directed. |
| 133 | M&L RCC M-25 design mix (using 20mm graded aggregates) as in beams, lintel beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 134 | M&L RCC M-25 design mix (using 20mm graded aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and inshelves and the like complete all as specified and directed |
| 135 | M&L RCC M-25 design mix (using 20mm graded aggregates) as in chajjas complete all as specified and directed |
| 136 | M&L for flat fair finished formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed |
| 137 | M&l for flat fair finished formwork to sides and soffits of floor or roof beams, beam haunchings, columns, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed |
| 138 | M&L for Formwork to fair finished surfaces of concrete, square or rectangular, sides of pillars, posts, struts, piers, columns and stanchions complete all as specified. |
| 139 | M&L for formwork to soffits of suspended slabs (rough finished flat surfaces of concrete) such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 140 | M & L for Precast cement concrete 1:3:6 type C1 (20mm graded aggregate) solid block masonry exc.10 cm in width and setting in cement mortar 1:4 completeall as specified and as directed. |
| 141 | M&L for 40mm thick damp proof course in cement concrete type B0 1:2:4 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 142 | M & L for hardcore of broken stone or boulders of gauge n exc 63mm deposited, spread levelled in layers n exc 15cm thick, watered and rammed to a true surface completeall as specified and directed. |
| 143 | M & L for 75 mm thick PCC (1:3:6) type C2 using 20mm graded stone aggregate as in path / plinth protection finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 144 | S&F 30mm thick (style thickness) factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 145 | S&F factory made solid PVC door frame of size 50mm x 47mmmade out of 5mm, single side prelam PVC sheet used instead of Plain colour PVC sheet, reinforced with M.S. Square tube & edges will be painted to match with single side prelam PVC sheet as per specification & drawing complete all as specified and directed. |
| 146 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed. |
| 147 | S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 148 | S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed. |
| 149 | S&F 150 mm long extruded Aluminium alloy handles, cast type, anodisedcomplete all as specified and directed. |
| 150 | S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beads in squares not exceeding 0.5 Sqm in each panecomplete all as specified and directed. |
| 151 | S&F Vitreous China Urinal, Half stall type, white including providing and fixing of plugs bedding against wall in CM 1:2 securing urinal to plugs with and including 60mm long brassscrews, pointing around urinal back in cement; fixing automaticflushing cistern with brackets, flush pipe, grating and Union fordischarge pipe complete all as specified and directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 152 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board fixed to wooden plugs with chromium plated brass screws and cup washersetc complete all as specified and directed. |
| 153 | S&F pillar taps with aerator, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore dia of pipecompleteall as specified and directed. |
| 154 | S&F in repairs 15 mm bore bib tap with wall flange and aerator, brass chromium plated with fancy type and screwed down to 15 mm bore GI tubing or for brass ferrule complete all as specified and directed. |
| 155 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed. (Minimum weight 60gms) |
| 156 | S&F PVC connections 15mmdia , 450mm long, withPTMT nuts& washers at both ends suitable for 15mm bore pipeline complete all as specified and directed. |
| 157 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fancy type including fixing arrangement etc complete all as specified and directed. |
| 158 | S&F stainless steel grating 150mm dia complete all as specified and directed. |
| 159 | S&F Stainless steel paper holder of standard size complete all as specified and directed. |
| 160 | Supply & laying of 25 mm dia CPVC pipe SDR 11 and with plain CPVC SDR 11 fittings such as bends, elbows, unions and end pieces to receive the fittings, concealed in walls/ceiling or lay in floors and fixed with solvent including cutting chases, pinning in & making good disturbed portion completeall as specified and as directed. |
| 161 | All as per item No.161 specified here in before but 20mm outer dia pipes. |
| 162 | S&F Rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylindrically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms complete all as specified and as directed. |
| 163 | M&L for glazed coloured ceramic tiles area 300mm x 450mmx 6 to 7 mm thick as per IS 13712 grade II over and including 10mm thick backing coat in CM (1:4) set & jointed in neat cement slurry and pointed with coloured cement to match on the vertical surfaces as in dado/skirting (colour & pattern as approved by GE) complete all as specified and directed. |
| 164 | M&L for non-skid coloured ceramic tiles joint free 7 to 8mm thick (Square/Rectangular)area of each tiles exc 0.18 Sqm but n exc 0.38 Sqm in floors set and jointed in neat cement slurry and pointed incoloured cement to match including 15 mm thick screed bed or bedding layers in CM (1:6) for laying in floors finishing, complete all as specified and directed. |
| 165 | All as per item No.165 specified here-in-above, but on skirting/dado over 10mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 166 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base to floor, incl well compacting & laid to levels etc, complete all as specified and directed. |
| 167 | Supply and layingmachine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layersof anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thicknessmade by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 168 | Supply only integral water proofing compound complete all as specified and as directed. |
| 169 | Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. |
| 170 | Taking down carefully UNSV main switch and DB\"s including MCBs of any size make, type and capacity and depositing at site as directed. |
| 171 | Taking down carefully UNSV Submain wiring and Services cable of any size make, type and capacity and depositing at site as directed. |
| 172 | M&L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring,drawn through in and includingnon-metalicPVC concealed (including Cutting Chases and make good the distrubed surfaces as per existing finishes) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, suitable for One light point controlled by one, one wayswitch, complete all as specified and directed.Note:- The rates of chase cutting on wall done concealed conduit & making good good the distrubed surfaces as per existing finishes and steel terminal boxes are included in the unit rates |
| 173 | All as per Sr. item No.173 here-in-above, but One fan/Exhaust fan point controlled by one way switch |
| 174 | All as per Sr. item No.173 here-in-above, but One socket outlet 3 pin, 5/6 Amps on independent board, controlled by one no 5/6 Amp switch. |
| 175 | All as per Sr. item No.173 here-in-above, but One socket outlet 3 pin 5/6 amps on the same board controlled by one no 5/6 Amp switch. |
| 176 | All as per Sr. item No.173 here-in-above, but with using 4.0 Sqmm FRLS copper wire with 4.0 Sqmm FRLS copper earth wire for independent 15/16 Amp point. |
| 177 | M&L for modular point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated but unsheathed single core FR-LSH cable (RYBN) 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring,drawn through in and includingnon-metalicPVC heavy duty concealed (including Cutting Chases and make good the distrubed surfaces as per existing finishes) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FR-LSH cable (Green) 1100 volt grade, PVC insulated but unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/socket/regulator with sleek and curvy cover plates, for mounting of modular swithces, sockets, fan regulators complete, suitable for One light point controlled by one, one wayswitch, complete all as specified and directed.Note:- The rates of chase cutting on wall done concealed conduit & making good good the distrubed surfaces as per existing finishes and steel terminal boxes are included in the unit rates |
| 178 | All as per Sr. item No.178 here-in-above, but One fan/Exhaust fan point controlled by one way switch |
| 179 | All as per Sr. item No.178 here-in-above, but One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch. |
| 180 | S&F Switch piano flush type, single pole, one way, 5/6 amps, 230 volts, complete all as specified and directed. |
| 181 | S&F Socket, two-in-one, 3/5 Pin, 5/6 Amp, universal type, 230 volts, complete all as specified and directed. |
| 182 | S&F Switch piano flush type, single pole, one way, 15/16 amps, 230 volts, complete all as specified and directed. |
| 183 | S&F Socket, 2-in-1, 6 pin, 6/16 Amp, flush type, 230 volts, complete all as specified and directed. |
| 184 | S&F and replacement of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed. |
| 185 | S&F LED lamp 9W complete all as specified and directed by the Engineer-in-Charge. |
| 186 | S&F Ceiling rose, two / three terminals, bakelite body, 230 volts, complete all as specified and directed. |
| 187 | S&F Ceiling rose, two / three terminals, bakelite body, 230 volts, complete all as specified and directed. |
| 188 | S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed. |
| 189 | S&F Modular switch flush type single pole one way 6 Amp ISI marked complete all as specified and as directed. |
| 190 | S&F Modular socket outlet 2 in 1, 3 pin, 6 Amp, 230 Volts flush type complete all as specified and as directed. |
| 191 | Supply and fixing LED lights fitting 1x 20W, 4 ft long, T-5 batten fitting, designed linear sleek aesthetic PVC housing, PC cover ensures soft and glare free lighting wide angle of 120 degree, upto (110Lm/W) complete all as specified and as directed. |
| 192 | S&F LED light fittings, with1x9Watt / 1x10Watt LED 230 Volts 50 Hz bulk head luminares, complete with all accessories and including connecting up with PVC insulated and sheathed, 1100 volts grade, flexible, multistranded 1.0 sqmm copper conductor three core cable complete all as specified and directed. |
| 193 | S&F LED light fitting 1x10 Watt mirror type with high output diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 194 | S&F Electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 Litre, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece complete all as specified and directed. |
| 195 | S&F bldg security LEDLight Luminaire of 36 Watts 230V AC having IP 66 protection fitting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length (or bracket as approved by GE) including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and as directed. |
| 196 | S&F LED COOL white light fitting mirror type with high output diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 197 | S&F Amp rating 240V, 10kA \"C\" curve Miniature Circuit Breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. . |
| 198 | S&F MCB, B Curve type, 10KA, 40 to 63 Amp, SPN with overload and short circuit protection, complete all as directed. |
| 199 | S&F MCB, B Curve type, 10KA, 6 to 32 Amp, single pole with overload and short circuit protection, complete all as directed. |
| 200 | S&F MCB, Single pole \"C\" series 5-32 Amps ISI marked, complete all as specified and directed. |
| 201 | S&F MCB, Single pole and neutral \"C\" series 63 Amps ISI marked, complete all as specified and directed. |
| 202 | Supply & fixing as MCB DB DD SPN 12 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall incl dismantling of old UNSV DB all as specified and as directed. |
| 203 | S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 204 | S&F Heavy duty Exhaust fan 300mm sweep, 900 RPM, including louvers with cutting chases on brick wall and grouting with nut bolts, voltage 230 V, 50 Hz, Copper winding complete all as specified and directed. |
| 205 | M&L for earthing complete with galvanized steel earth plate electrode of size60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metredeep below normal ground level with top edge of the plate not lessthan1.5 metre below normal groundlevel surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991)incl dismantling of existing unserviceable earth pit complete all as specified and directed. |
| 206 | Supply, laying testing of LT UG XLPE in trenches insulated, armoured, heavy duty electric cable, aluminium coductor, 1100 V grade, cross sectional area16 sqmm 2 core, complete all as directed by Engr-in-charge. Note : Earth work and brick work measured and paid separately |
| 207 | Supply, laying testing of LT UG XLPE in trenches insulated, armoured, heavy duty electric cable, aluminium coductor, 1100 V grade, cross sectional area25 sqmm 2 core, complete all as directed by Engr-in-charge. Note : Earth work and brick work measured and paid separately |
| 208 | Supply and laying unreinforced Precast concrete cable cover, class LV, type 1,flat size 300 mm x 180 mm x 40mm, complete all as specified and directed. |
| 209 | Supply and laying of sand for sand cushioning for cable protection in trenches including punning down ofsand layer all as specified and directed. Note :- Punnedthickness shall only be measured and paid. |
| 210 | S&F GI tubing , light grade of 40mm bore with fittings as in road crossings for cable protection complete all as specified and as directed. |
| 211 | NOTE:- (i)-The contract sum shall be arrived at after duducting amount of schedule of \"Credit\" from the Total quoted amount |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
