|
| 1 | Demolition of brick work or stone / boulder masonry,built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed |
| 2 | Demolition of Concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed |
| 3 | Excavating over areas not exc 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed |
| 4 | Excavating in trenches, n.exc 1.5m wide and n exc 1.5 in depth; for foundation getting out hard/dense soil. |
| 5 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and as directed |
| 6 | Removing excavated material exc.1.5km but n exc 5.00km and depositing where directed at a level n.exc 1.50 m above the starting point in soils. complete all as specified and as directed |
| 7 | M&L walling of random rubble uncoursed well bounded bedded and solidly hearted built in CM 1:4 and pointed the dressed surface with same mortar as the work process complete all as specified and as directed |
| 8 | Labour and mortar only (except stone) walling of random rubble masonry uncousred well bounded bedded and solidly hearted built in CM 1:4 and pointed the dressed surface with same mortar as the work process,complete all as specified and as directed. |
| 9 | M&L for PCC 1:4:8 type D2 using 40 mm gradded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed |
| 10 | Labour only for laying loose filling with aggregate broken stone or boulder of gauge 40mm to 63mm in weep holes, etc complete all as specified and as directed(Material obtained from exvavation /demoiltion of RRM/PCC bk masonry vide item No 3 & 4) |
| 11 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm granite or trap stone complete all as specified and as directed |
| 12 | M&L for providing precast cement concrete 1:2:4,Type B1(using 20mm graded stone aggregate) as in bond stone walling of any section indicated, with plain fair faces, and setting in CM 1 :4 complete with joints to match complete all as specified and as directed. |
| 13 | M&L Raised pointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto courses including raking out joints to the joints to existing or new surfaces complete all as specified and as directed. |
| 14 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as incills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, bond stone walling including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 15 | S&F PVC (SWR) pipes single socketed, in any lengthwith rubber ring joints, fixed to walls (110mm bore) complete all as specified and as directed |
| 16 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, haking for key scrubbling down with water etc. complete all as specified and as directed |
| 17 | M&L for Rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished even and smooth without to using extra cementcomplete all as specified and as directed |
| 18 | M&L Preparing New Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint (as approved Tint) over a Coat of Chalk whiting, on plastered surfaces, complete all as specified and as directed. |
| 19 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 20 | S&F mild steel for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, prong ,water tank frame work,monkey gauge etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door fittings, inclusive of steel sheeting or other covering, running rails and guides, CI ornaments fitting; also fastening and fixing complete and similar work confirming to Fe-290 Gde E- 165 complete all as specified and as directed |
| 21 | M&L for removing the steel gates with or without removing the gate pillars and re-fixing the gates to the existing or new pillars by changing the location of the hinges through necessary cutting and rewelding /re-fixing the hinges, aldrops, stoppers etc complete all as specified and as directed |
| 22 | Demolition of re-inforced cement concrete of any description and in any position complete all as specified and as directed. |
| 23 | M&L for Precast RCC cover slab( for manholes )CM1:2:4, type B1,using 20mm graded stone aggregatewith plainfaces including setting in CM 1:4 complete all as specified and as directed. |
| 24 | M&Lfor TMT bars 10mm dia and over as reinforcement, cut to length, bent to shape required,including cranking, binding, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 25 | M&L for TMT bars, 8mm dia and over cut to length bent to shape required incl cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia. complete all as specified and as directed |
| 26 | M&L cement concrete type C-2 (1:3:6) (40mm graded aggregate) 75 mm thick as in Plinth protection/pavingsfinishing cement concrete surface even and smooth without using cement complete all as specified and as directed |
| 27 | M&L Chequered cement concretecoloured tiles 300mm x 300mm and 22-25 mm thick set jointed in neat cement slurry in floors with grey cement & pigment including 20 mm thick screed bed in CM 1:6 complete all as specified anddirected |
| 28 | M&L for Cement concrete type B-2, 1:2:4 (40mm graded agg) 75 mm thick as receive top layer even and smooth without using cement complete all as specified and as directed |
| 29 | M&L for precast cement concrete solid building blocks masonary exe 10 cm in width and setting in mortar 1:4 type C-1 1:3:6(20 mm graded agregate ) complete all as specified and as directed |
| 30 | M&L for plain cement concrete type-C2, 1:3:6 (40mm garaded agg.) in surface channel and drains complete including necessary form work all as specified and directed |
| 31 | M&L extra for forming fair finished drain or channel anygirth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed |
| 32 | M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed. |
| 33 | M&L for preparation of old painted concrete surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 34 | M&L for preparation of Old plastred surfaces of walland applying one coat ofcement coat painton external wall of compound wall , Retaing wall etc, complete all as specified and as directed. |
| 35 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 36 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in natural ground complete as specified. |
| 37 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in concrete complete as specified. |
| 38 | Taking downgalvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings, or any type fixed to precast RCC fencing posts/angle iron posts, struts, etc.complete all as specified and directed |
| 39 | Dismantling of wrought iron or mild steel work of any description not other wise provided for complete as specified. |
| 40 | Excavating in Post holes (or similar holes) each n exc 0.50 cum, getting out, Returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25cm, watering and removing surplus soil to a distance not exc. 50 m and making good surfaces in soft/loose soil, complete all as specified and as directed. |
| 41 | S&F for Steel work in tubular trussesincluding special shapedwasher etc. complete using ERW or induction butt weldedtubes conforming to I. S.1161 1979 grade St.-240 |
| 42 | M& L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc |
| 43 | S&F Mild steel flat iron for wind ties, incl drilling holes, securing bolt etc. and similar work conforming to Fe-290 Gde-E 165. |
| 44 | S&F mild steel screw bolt, 5 to 10mm dia (machine made) with hexagonal head at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 05cm and not exceeding 10cm long. |
| 45 | M&L for preparing new steel and iron surfaces of any description n.exc 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. |
| 46 | M&L for Mild steel Round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. Fe 410 W Gde E-250 Quality A or Fe 290 Gde E - 165. |
| 47 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured). |
| 48 | Supply only Chain link MS galvanisd fencing, any size or type (100x100). |
| 49 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire. |
| 50 | M&L Demolition of unreinforced concrete of any description and in any position not otherwise specifically provided including removing debris outside MD land complete all as specified. |
| 51 | M&L Pre-cast cement concrete (Type C-1, 1:3:6 using 20 mm Graded stone aggregate) block masonry with solid blocks, exc. 10cm in width and setting in mortar, 1:6 complete as specified and as directed. |
| 52 | M&LRendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 complete as specified. |
| 53 | S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing, balusters made of hollow tubes,balusters, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where everrequired) and fitting the same with necessarystainless steel nuts and bolts complete, includingfixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor orthe side of waist slab with suitable arrangementetc all as specified and as directed. |
| 54 | S&F for stainless steel (grade 304) chain 4 mm thick including necessary welding at joints, grinding to SS railing etc including taking down old UNSV SS chain etc all as specified and as directed. |
| 55 | Spreading and levelling with approved soil obtained from excavation in layers n exc. 25 cm thick, well ramming including watering as required for filling up the rear portion of wall. |
| 56 | Rough excavation not exceeding 1.5 m deep and getting out in hard/dense soil. |
| 57 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil. |
| 58 | Removing excavated material n exc. 50 m and depositing where directed |
