|
| 1 | Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5m deep for laying pipe line including getting out insoft / loose soil complete all as specified and directed by Engineer-in-Charge. |
| 2 | Returningfilling in , including spreading , levelling,watering and well ramming in layers not exceeding 25cm thick ,in any type of soil complete all as specified and directed by Engineer-in-Charge. |
| 3 | Removingexcavated material (Soils) not exceeding50.00 mtr and depositing where directed at a level not exceeding1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & Labour forlagging to pipes (for the 20mm GI tubing ) used in external water supply of plumbing all around with 25mm thick bonded mineral wool pre-formed. SNAPON pipe section of density 144 Kg/Cum conforming to IS-9842 or equivalent and provided chicken wire mesh netting 25 gauge 20mm meshing and plaster of Peris 3mm to 5 mm thick all around the mesh after breaking old unservicable / broken lagging complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material & Labour forlagging to pipes (for25mm GI tubing ) used in external water supply of plumbing all around with 25mm thick bonded mineral wool pre-formed. SNAPON pipe section of density 144 Kg/Cum conforming to IS-9842 or equivalent and provided chicken wire mesh netting 25gauge 20mm meshing and plaster of Peris 3mm to 5 mm thick all around the mesh after breaking old old unservicable / broken lagging complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material & Labour for lagging to pipes (for15mm GI tubing) used in external water supply of plumbing all around with 25mm thick bonded mineral wool pre-formed. SNAPON pipe section of density 144 Kg/Cum conforming to IS-9842 or equivalent and provided chicken wire mesh netting 25gauge 20mm meshing and plaster of Peris 3mm to 5 mm thick all around the mesh after breaking old old unservicable/ broken lagging complete all as specified and directed by Engineer-in-Charge. |
| 7 | Taking up or down of size of 15 mm bore GI/steel tubingcomplete all as specified and directed by Engineer-in-Charge. Note: Excavation and earth work shall be measured and paid seperately under appropriate item of Schedule \"A\" BoQ. |
| 8 | Taking up or down of size of 20 mm bore GI/steel tubingcomplete all as specified and directed by Engineer-in-Charge. Note: Excavation and earth work shall be measured and paid seperately under appropriate item of Schedule \"A\" BoQ. |
| 9 | Taking up or down of size of 25/32 mm bore GI/steel tubingcomplete all as specified and directed by Engineer-in-Charge. Note: Excavation and earth work shall be measured and paid seperately under appropriate item of Schedule \"A\" BoQ. |
| 10 | Taking up or down of size of 40/50 mm bore GI/steel tubingcomplete all as specified and directed by Engineer-in-Charge. Note: Excavation and earth work shall be measured and paid seperately under appropriate item of Schedule \"A\" BoQ. |
| 11 | Refixing oldservicable GI/steel tubingof size 15 mm boreand connection in new or old position after cleaning of surfaces complete all as specified and directed by Engineer-in-Charge. Notes :(a)Old servicablepipes for refixing shall be retrived from serial item no.7.00 of BoQ here-in-before. (b) The rate of cleaning of pipesurfaces is included in this item and nothing shall be paid extra on this ground. |
| 12 | Refixing oldservicable GI/steel tubingof size 20 mm boreand connection in new or old position after cleaning of surfaces complete all as specified and directed by Engineer-in-Charge. Notes :(a)Old servicablepipes for refixing shall be retrived from serial item no.8.00 of BoQ here-in-before. (b) The rate of cleaning of pipesurfaces is included in this item and nothing shall be paid extra on this ground. |
| 13 | Refixing oldservicable GI/steel tubingof size 25/32 mm boreand connection in new or old position after cleaning of surfaces complete all as specified and directed by Engineer-in-Charge. Notes :(a)Old servicablepipes for refixing shall be retrived from serial item no.9.00 of BoQ here-in-before. (b) The rate of cleaning of pipesurfaces is included in this item and nothing shall be paid extra on this ground. |
| 14 | Refixing oldservicable GI/steel tubingof size 40/50 mm boreand connection in new or old position after cleaning of surfaces complete all as specified and directed by Engineer-in-Charge. Notes :(a)Old servicablepipes for refixing shall be retrived from serial item no.10.00 of BoQ here-in-before. (b) The rate of cleaning of pipesurfaces is included in this item and nothing shall be paid extra on this ground. |
| 15 | Material and labour for cutting, drilling and tapping cast iron/GI water mains (in postion) insize for branch connection of the internal dia 15mm including excavtion earth work re-filling, leakge testing & fixing assceesory etc. complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material and labour for cutting, drilling and tapping cast iron/GI water mains (in postion) in size for branch connection of the internal dia 20mm including excavtion earth work re-filling, leakge testing & fixing assceesory etc complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material and labour for cutting, drilling and tapping cast iron/GI water mains (in postion) in size for branch connection of the internal dia 40mm including excavtion earth work re-filling, leakge testing & fixing assceesory etc complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and laying in replacement of old damaged/ rusted GI tubes medium grades of 100 mm dia complete with all new fittings (like; union, tee, bend, elbow, reducer, socket, flanged, 6mm gasket) to be fixed on wall and ceilings or laid in floors/trenches complete all as specified and directed by Engineer-in-Charge. Notes : (a) Welding for flanged is deemed to be included in this rate. (b) if the pipe is laid in trenches the rate of earth work is included in this item and nothing shall be paid extra on this account. |
| 19 | All as per item No. 18 here-in- beforebut of size of 80mm bore complete all as specified and directed by Engineer-in-Charge.Notes : (a) Welding for flanged is deemed to be included in this rate. (b) if the pipe is to be laid in trenches earth work shall be measured and paid seperately under appropriate item of Schedule \"A\" BoQ. |
| 20 | All as per item No. 18 here-in- before but of size of 50mm bore complete all as specified and directed by Engineer-in-Charge.Notes : (a) Welding for flanged is deemed to be included in this rate. (b) if the pipe is to be laid in trenches earth work shall be measured and paid seperately under appropriate item of Schedule \"A\" BoQ. |
| 21 | All as per item No. 18 here-in- before but of size of 40mm bore complete all as specified and directed by Engineer-in-Charge.Notes : (a) Welding for flanged is deemed to be included in this rate. (b) if the pipe is to be laid in trenches earth work shall be measured and paid seperately under appropriate item of Schedule \"A\" BoQ. |
| 22 | All as per item No. 18 here-in- before but of size of 25mm bore complete all as specified and directed by Engineer-in-Charge.Notes : (a) Welding for flanged is deemed to be included in this rate. (b) if the pipe is to be laid in trenches earth work shall be measured and paid seperately under appropriate item of Schedule \"A\" BoQ. |
| 23 | All as per item No. 18 here-in- before but of size of 20mm bore complete all as specified and directed by Engineer-in-Charge.Notes : (a) Welding for flanged is deemed to be included in this rate. (b) if the pipe is to be laid in trenches earth work shall be measured and paid seperately under appropriate item of Schedule \"A\" BoQ. |
| 24 | All as per item No. 18 here-in- before but of size of 15mm bore complete all as specified and directed by Engineer-in-Charge.Notes : (a) Welding for flanged is deemed to be included in this rate. (b) if the pipe is to be laid in trenches earth work shall be measured and paid seperately under appropriate item of Schedule \"A\" BoQ. |
| 25 | Material& Labour forreplacement of Cast Iron fitting such asbends, tappers any type tee, caps reducer ,collar and plugupto 150 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supply& Fixingin replacement of old damged Cast Iron pipes of size100 mm borespigot and socket ends centrifugally cast. Class Ain any length with gasket,laid in trenches complete all as specified and directed by Engineer-in-Charge.Note: Excavation and earth work shall be measured and paid seperately. |
| 27 | All as per item No. 26 here-in-beforebut of size of 80 mm bore complete all as specified and directed by Engineer-in-Charge.Note: Excavation and earth work shall be measured and paid seperately. |
| 28 | Supply & Fixing in replacement of old damaged / unserviceable Gun metal globe or gate valve non rising spindle heavy duty with iron wheel head, screwed both end for connection GI pipes of size of 80mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 29 | All as per item No. 28 here-in- before but of size of 50mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 30 | All as per item No. 28 here-in- before but of size of 40mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 31 | All as per item No. 28 here-in- before but of size of 25mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 32 | All as per item No. 28 here-in- beforebut of size of 20mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 33 | All as per item No. 28 here-in- before but of size of 15mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply and fixing in replacementof GI union of size of 15 mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 35 | All as per item No. 34 here-in- beforebut of size of 20 mm bore (ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 36 | All as per item No. 34 here-in- beforebut of size of 25 mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 37 | All as per item No. 34 here-in- before but of size of 40 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 38 | All as per item No. 34 here-in- beforebut of size of 50 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply and fixingin replacement GI elbow of size of 15 mmbore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 40 | All as per item No. 39 here-in-before but of size of 20 mmbore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 41 | All as per item No. 39 here-in-beforebut of size of 25 mmbore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 42 | All as per item No. 39 here-in-beforebut of size of 40mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 43 | All as per item No. 39 here-in-beforebut of size of 50 mm bore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply and fixing in replacementGI Tee of size of 15 mmbore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 45 | All as per item No. 44 here-in- beforebut of size of 20 mmbore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 46 | All as per item No. 44 here-in- beforebut of size of 25 mmbore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 47 | All as per item No. 44 here-in- beforebut of size of 40 mmbore (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 48 | All as per item No. 44 here-in- beforebut of size of 50 mmbore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fixingin replacementGI Socket of size of 15 mmbore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 50 | All as per item No.49 here-in-before but of size of 20mmbore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 51 | All as per item No.49 here-in-before but of size of 25 mmbore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 52 | All as per item No.49 here-in-before but of size of40 mmbore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 53 | All as per item No.49 here-in-before but of size of 50 mmbore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply and fixingin replacement of GI Nipple of size of 15 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 55 | All as per item No. 54 here-in- beforebut of size of 20 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 56 | All as per item No. 54 here-in- before but of size of 25 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 57 | All as per item No. 54 here-in- beforebut of size of 40mmbore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 58 | All as per item No. 54 here-in- before but of size of 50 mm bore (ISI marked ) complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply and fixingin replacementof GI Flanged with 6mm gasketof size of40 mmbore complete all as specified and directed by Engineer-in-Charge. |
| 60 | All as per item No. 59 here-in- beforebut of size of50 mmbore complete all as specified and directed by Engineer-in-Charge. |
| 61 | All as per item No. 59 here-in- beforebut of size of80 mmbore complete all as specified and directed by Engineer-in-Charge. |
| 62 | All as per item No. 59 here-in- beforebut of size of 100mmbore complete all as specified and directed by Engineer-in-Charge. |
| 63 | Supply only Calcium based granular disinfectant for water treatment more stable than chlorine gas, and stronger than Bleaching powder and sodium Hypochlorite pack of 45 Kg plastic drum complete all as specified and directed by Engineer-in-Charge. Note: Drum packing shall be 45 kg for payment and measurement purpose. |
| 64 | Supply and fixing in replacement cast iron non return valveof 100 mm bore , PN 1.6, both ends flanged , ISI Marked, jointed and testing complete all as specified and directed by Engineer-in-Charge. |
| 65 | Supply and fixing in replacement cast iron non return valve of 80 mm bore , PN 1.6, both ends flanged , ISI Marked, jointed and testing complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply and fixing in replacement Sluice valve of100 mmbore Cast lron body PN 1.6 (ISI marked) with brass spindle, iron wheel head typeconnecting and testingcomplete complete all as specified and directed by EIC. |
| 67 | Supply and fixing in replacement Sluice valve of80 mmbore Cast lron body PN 1.6 (ISI marked) with brass spindle, iron wheel head typeconnecting and testingcomplete complete all as specified and directed by EIC. |
| 68 | Supply and fixing in replacement Sluice valve of100 mmbore Cast lron body PN 1.0 (ISI marked) with brass spindle, iron wheel head typeconnecting and testingcomplete complete all as specified and directed by EIC. |
| 69 | Supply and fixing in replacement Sluice valve of80 mmbore Cast lron body PN 1.0 (ISI marked) with brass spindle, iron wheel head typeconnecting and testingcomplete complete all as specified and directed by EIC. |
| 70 | Material & Labour forRepair / Replacement and AMC for Six month of RO + UF commercial plant capacity of 250 LPH including Replacement of sediment filter 20 \" (Every Month ) - 02 Nos. , Replacement of chemical for vessels (Once in 06 months ) - 02 Nos ,Replacement of RO membrane (Once in year)-01 No. , Service will be done every two months or on call, AMC including all Electrical Parts , including warranty/Guarantee of electronic/electrical items such as Motor 1/2 Hp - 01 No., Dozing Pump 01 No, Pressure gauge, UV Lamp, Electronic panel board and rectifying if any leakage/breakage/short-Circuit of vessel, multiport andpanel board, panel wires, other spares , Testing complete all as specified and directed by Engineer-in-Charge.Note :- Rate of items requiredto be replacement during serviceing/ AMC periodwill be included in the quoted rate by contractor |
| 71 | Material and labour forbrick masonary valve chamber of size 0.90 mtrx 0.90 mtr x 0.90 mtr as shown on Drg No CWE/TD/129 sheet No 1/1 dated 18.12.87 and cover including earth work complete all as specified and directed by Engineer-in-Charge and comprising of the following :-(a) 150 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate for foundation.(b) Brick work with using old size burnt clay bricks 230 mm thick built in Cement Mortar 1:4.(c) 15 mm thick rendering in Cement Mortar 1:4internally and externally to exposed surface of brick work including150 mm below ground level(d) 100 mm thick coping in PCC 1:2:4 type B1 using 20 mm graded stone aggregates.(e) MS covers made out of 5 mm thick MS plate with double hinges, fixed MS angle iron frame made out of MS angle iron 40mm x 40mm x 5 mm thick with and including 150 mm long hold fast made out of MS flat iron of size 25mm x 4 mm embedded in PCC coping MS covers shall be provided with suitable hand grip and suitable locking arrangement complete all specified and as directed by Engineer-in-charge..(f) All MS surfaces shall ,be painted with two coats of synthetic enamel paint over a coat of red oxide primer. Note : The drawing is not being supplied with Tender Documents, however the same is available in GE\"s office and can be collected/referred during working hours at any working day. |
| 72 | Allas per item No 71 herein before but of size0. 60 m x 0 .60m x 0.60 m Internal size complete all as specified and directed by Engineer-in-Charge. |
| 73 | Supply and fix in replacement of MS cover made outof5 mm thick MS sheet with double hinges and suitable handle locking arrengement etc complete with andincluding two coats of synthetic enamel paint and one coat of primer allas complete all as specified and directed by Engineer-in-Charge.Notes: (i) Payment shall be made after considering actual weight of mild steel.(ii) During the weighingof mild steel weight of two coats of synthetic enamel paint and one coat of primer shall not be considered . However the rate of two coats of synthetic enamel paint and one coat of primer is included in this item and nothing shall be paid extra on this account. |
| 74 | Material and labour forcleaning of underground sump of capacity of 25000 Gallon by bailing out the remaining water after pumping by arranging re-watering pumps orby manual and wash the walls & bottom surface by high pressure spray of approximating 195 PSI with rotary water jet pumps and removing thesludge and foreign matters complete by and socking out the fixing with high pressure wet vacuumpumps scrubbing the wall and cleaning the entire sump including disinfectioning the tanks with spray of chemical approach by concerned authorities complete etc including white washing to inner surface to tank and writing date of cleaning and capacity to tank with synthetic enamel paint on tank complete all as specified and directed by Engineer-in-Charge. Note: The arrangment of rotary jet pumppump and vacuum pump with fuelshall be made by contractor at his own arrangment . The rates of this aspect is included in this item and nothing shall be paid extra on this account. |
| 75 | All as per srl item No. 74 here- in before but capacity 15000 Gallons semi reservoir complete all as specified and directed by Engineer-in-Charge. |
| 76 | Material and labour for painting to water supply tubing any dia after prepration of old painted surface by proper cleaning and then applying two coat of synthetic enamelled paint as per existing colour code or as directed by Engineer-in-Charge. Note: measurment and payment shall be made in Sqm. |
| 77 | Material & Labourfor rectifying leakage of CI pipe line150 mm bore including excavation in mud (not exceeding 1.5 mtr x 1.5mtr x 1.0 mtr) and making arrangement for dewatering by using electric/diesel pump/manual additional labour, taking out existing joint and making new run leadjoint complete all as specified and directed by Engineer-in-Charge. Note: The arrangment of electric/ diesel pump with fuelshall be made by contractor at his own arrangment . The rates of this aspect is included in this item and nothing shall be paid extra on this account. |
| 78 | All as per item No.77 here -in- beforebut of size of 100 mmbore complete all as specified and directed by Engineer-in-Charge.Note: The arrangment of electric/ diesel pump with fuelshall be made by contractor at his own arrangment . The rates of this aspect is included in this item and nothing shall be paid extra on this account. |
| 79 | All as per item No.77 here-in- before but of size of 80 mmbore complete all as specified and directed by Engineer-in-Charge.Note: The arrangment of electric/ diesel pump with fuelshall be made by contractor at his own arrangment . The rates of this aspect is included in this item and nothing shall be paid extra on this account. |
| 80 | Material and labour for rectifying leakage of GI pipe 100 mm bore line including excavation in mud (not exc 6.1mrx 0.7mtr x 0.7mtr ) and making arrangement for dewatering by using electric/diesel pump/manual additional labour, for taking out old jointing fitting and Supply and Fixingnew one jointing fitting such as socket, nipple,union,elbow and reducers complete all as specified and directed by Engineer-in-Charge. Note: The arrangment of electric/ diesel pump with fuelshall be made by contractor at his own arrangment . The rates of this aspect is included in this item and nothing shall be paid extra on this account |
| 81 | All as per item No- 80 but of size of 80 mm dia bore complete all as specified and directed by Engineer-in-Charge.Note: The arrangment of electric/ diesel pump with fuelshall be made by contractor at his own arrangment . The rates of this aspect is included in this item and nothing shall be paid extra on this account |
| 82 | All as per item No. 80 here-in- beforebut of size of 50 mmbore complete all as specified and directed by Engineer-in-Charge.Note: The arrangment of electric/ diesel pump with fuelshall be made by contractor at his own arrangment . The rates of this aspect is included in this item and nothing shall be paid extra on this account |
| 83 | All as per item No. 80 here-in- beforebut of size of 40 mmbore complete all as specified and directed by Engineer-in-Charge.Note: The arrangment of electric/ diesel pump with fuelshall be made by contractor at his own arrangment . The rates of this aspect is included in this item and nothing shall be paid extra on this account |
| 84 | All as per item No. 80 here-in- before but of size of 25 mmbore complete all as specified and directed by Engineer-in-Charge.Note: The arrangment of electric/ diesel pump with fuelshall be made by contractor at his own arrangment . The rates of this aspect is included in this item and nothing shall be paid extra on this account |
| 85 | All as per item No. 80 here-in- before but of size of 20 mmbore complete all as specified and directed by Engineer-in-Charge.Note: The arrangment of electric/ diesel pump with fuelshall be made by contractor at his own arrangment . The rates of this aspect is included in this item and nothing shall be paid extra on this account |
| 86 | All as per item No. 80 here-in- before but of size of 15 mm dia bore complete all as specified and directed by Engineer-in-Charge.Note: The arrangment of electric/ diesel pump with fuelshall be made by contractor at his own arrangment . The rates of this aspect is included in this item and nothing shall be paid extra on this account |
| 87 | Material & Labourfor replacement of burnt / damaged flat Single core copper conductor PVC insulated and PVC sheathed Flexible copper Wire of nominal cross sectional area of conductor 35 sq mm including replacement of copper thimble of required sizecomplete all as specified and directed by Engineer-in-Charge. |
| 88 | Material & Labour for replacement of burnt / damaged flat Three core copper conductor PVC insulated and PVC sheathedSubmersible cable of nominal cross sectional area of conductor 16 sq mm including replacement of copper thimble of required size complete all as specified and directed by Engineer-in-Charge. |
| 89 | Supply & Fixing in replacement of FASD starter suitable for capacity 12.5 HP submersible pumpbuilt in over load relay complete all as specified and directed by Engineer-in-Charge. |
| 90 | Supply & Fixing in replacement of FASD starter oil immersed suitable for capacity 30 HP centrifugal pump built in over load relay complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply & Fixingin replacement of FASD starter oil immersed suitable for capacity 60 HP centrifugal pump built in over load relay, complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply & Fixingin replacement of FASD starter oil immersed suitable for capacity 75 HP centrifugal pump built in over load relay,complete all as specified and directed by Engineer-in-Charge. |
| 93 | Material & labour for Disconnecting motor power cables of various sizes from electrical motor of different capacities and decoupling from thepump sets,removing and taking down carefully and transporting to authorised workshop ,Dismantaling stator and rotor carefully andrewinding stator assembly with supper enamelled copper windingwire of suitable gauge matching to existing gaugeand cleaning of slots ,core with carbon tetra chloride solution and apply two coats of insulation varnish and keep stator assembly in heating chamber to improve insulation strength ,reassemble motor completey and transporation to site ,coupling pump to motor and check for proper shaft alignments such that no vibratiobn produce during opertion coupling to pump with exact allinment, connect power cables to motor and testing of 60HP capacity motor complete all as specified and directed by Engineer-in-Charge. |
| 94 | All as per item No. 93 here-in-beforbut 30HP capacity motor complete all as specified and directed by Engineer-in-Charge. |
| 95 | Material and Labour for Overhaul cetrifugal pump and motor upto60 HP by renewal/replacement of bearing, terminal covers. Repairs the studs, nuts, bolts, rubber coupling, rubber bushes, spring, cups, shaft key slots, motor ventilation covers, impellers, foundation bolts and impregnation/ enameling of stator, rotor winding. Improve the old paint be removed by chipping apply 01 coat oxide primer, two coats of grey paint, align motors with drive mechanism etc complete all as specified and directed by Engineer-in-Charge. |
| 96 | Material and Labour Overhaul cetrifugal pump and motor 30 HP by renewal/replacement of bearing, terminal covers. Repairs the studs, nuts, bolts, rubber coupling,rubber bushes, spring, cups, shaft key slots, motor ventilation covers, impellers, foundation bolts and impregnation/ enameling of stator, rotor winding. Improve the old paint be removed by chipping apply 01 coat oxide primer, two coats of grey paint, align motors with drive mechanism etc complete all as specified and directed by Engineer-in-Charge. |
| 97 | Supply and fixing in replacement water proof insulation tape for submersible cable and wire 220V, double layer made of rubber and mastic to seal moisture complete all as specified and directed by Engineer-in-Charge. |
| 98 | Material and Labour for Periodical maintenance of solar water heater of capacityup to 500 LPD including checking serviceability of FPC/ETC panel choking cleaning and adding heat transfer chemical and replacing all defective items such evacuated tube, Flat plate, nuts, washer, gasket, end bracket, insulation, reflector of any size and make complete all as directed up to user satisfaction complete all as specified and directed by Engineer-in-Charge. |
| 99 | Material and Labour for Repacking stuffing box of sluice valve spindle of size of 80mm bore including taking apart and reassembling the same complete all as specified and directed by Engineer-in-Charge. |
| 100 | Material and Labourfor Repacking stuffing box of sluice valve spindle of size of 100mm bore including taking apart and reassembling the same complete all as specified and directed by Engineer-in-Charge. |
| 101 | Material and Labour for Repair / Replacement of Electro chlorinator 1100 gms commercial plant tank capacity of 200 Ltr including Replacement of Defective parts for sutablefree chlorine in a batch of 8 Hrs i.e 3.3 kg of chlorin in 24 Hrs complete with Batch type sodium HypochloriteGenerating system DC power supply with Generator module storage tank 200 Ltr ,metering cum Dozing pumpincluding warranty/Guarantee of electronic/electrical items such as Motor 1 Hp - 01 No, Dozing Pump-01 No. ,Pressure gauge, UV Lamp, Electronic panel board and rectifying if any leakage/breakage/short-Circuit of vessel, multiport andpanel board, panel wires, other spares , Testing complete all as specified and directed by Engineer-in-Charge.Note :-1. Rate of items requiredto be replacement during serviceing/ AMC periodwill be included in the quoted rate by contractor . 2. Old unservicable material obtained from this item shall be deposited in the store yard of AGE E/M of GE 861 EWS. |
| 102 | Supply, installation, testing & commissioning ofmonoblock pumping set , centrifugal Type,60 HP, Three phase, IP55 Protection, bronze impellor , stainless steel shaft, mechanical sealing suction pipe size 100 mm dia, delivery pipe size 100mm dia section head 8 to 9 mtr delivery head 220 to 250 Mtr, discharge 11000 GPH pump driven by suitable capacityelectric motor for pump model-RKB 50/15L, stages 9, KPML Motor- 55 KW/2P/415V/TEFC/IE2 Coupling+coupling Guard base plate complete with accessories including cement concrete foundation and complete all as specified and directed by Engineer-in-Charge.2. Old unservicable Pump obtained from this item shall be deposited in the store yard of AGE E/M of GE 861 EWS. |
| 103 | Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule \"A\"/BOQ |
