Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Providing and applying one coat of cement primer of approved brand or approved equivalent product/quality meeting technical specifications on wall surface to receive specified paint including scaffolding complete all as per specifications and as directed by Engineer-in-charge |
| 2 | Providing, applying wall painting twocoats on new work with premium plastic emulsion paint of approved brand or approved equivalent product/quality meeting technical specifications to give an even shade without cement primer.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 3 | Providing and applying white cement based wall putty of approved make or approved equivalent product/quality meeting technical specifications over concrete or Plastered surfaceup to 3 mm thickto get uniform surface free from undulationincluding cleaning complete all as directed by the Engineer-in-charge |
| 4 | Providing and Painting twocoats of synthetic enamel paint on steel surfaces of approved brand and manufacture or approved equivalent product/quality meeting technical specifications to give an even shade over aprimer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 5 | Providing and paintingTWO coats of synthetic enamel paint on newwoodensurfacesofapprovedbrandandmanufacturer or approved equivalent product/quality meeting technical specifications of requiredcolourtogiveanevenshadeoveranundercoatof suitableshade primer ofapprovedbrandandmanufacturer or approved equivalent product/quality meeting technical specifications including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 6 | Providing structural repairs in old damaged concretestructures / surfaces with approved Polymerwith following operations 1) Removal of loose/Spalled ordamaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and Quartz sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg Quartz sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm ,after every 20 mm thick repair, bond coat as per 2 aboveto be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shallbe used) |
| 7 | Providing and fixing Minimum15- 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames,shelves, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels |
| 8 | Providing and fixing of SS Pull-H Type Handle -32mm dia and 600MM long as directed by Engineer-in-charge. |
| 9 | Providing and fixing Homogeneous 2.00 mm thick UV resistant PVC tile in flooringin wooden veeneer finish of approved quality, colour and shade and skirting in approvedpattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer,levellingsmall undulations with plaster of paris if required, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-Charge in approved colour and shade. |
| 10 | Providing and laying Glazed/ Polished Vitrified floor/ walltiles of approved makeor approved equivalent product/quality meeting technical specifications in different sizesconforming to IS: 15622 in all colours and shade in Glossy or Matt or satin finish of size 600mm X 1200 mmlaid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based tile grout of approved make or approved equivalent product/quality meeting technical specifications and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-incharge. |
| 11 | Using tile of sizes 600mm X 1200 mm |
| 12 | Add Extra for polymer mortar in place of cement mortar |
| 13 | Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make or approved equivalent product/quality meeting technical specifications with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to wallswith C.P. brass screws and concealedwashers complete. all as per specifications and as directed by the Engineer-in-charge |
| 14 | Electrical welding (6 mm Fillet) including transporting Electrical welding plant to the site etc. complete. |
| 15 | Providing and fixing white vitreous china flat back half stall urinal size 580 x 380 x350 mm / 610 mm ofapproved makeor approved equivalent product/quality meeting technical specifications with 32mm C.P flush value with standard flush pipe and C.P. brass spreaders, 32mm urinal waste coupling with dome grating and clamp etc. including making G.I water line connection complete as directed by the Engineer-in-charge (Note : Only G.I. pipes will be paid under relevant Item)Single half stall urinal, as per Drg no A&SED/AR/1030/03/SD/A3-001/R0 |
| 16 | ProvidingandfixingwhitevitreouschinaEuropeantypeWater Closetwith \"P\" or \"S\" Trapwith solid seat and lid of approved make or approved equivalent product/quality meeting technical specifications, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231,flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc.complete all as per drawings and specifications and as directed by the Engineer-in-charge. As per Drg no A&SED/AR/1030/03/SD/A3-001/R0 |
| 17 | E.W.C. pan in White colourwith ISI marked white solid plastic seat and lid. |
| 18 | Providing and fixing Indian water closet (Orissa pan) with 100 mm China ware P or S trap, Flushing arrangements with32 mm flush valve ofapproved make or approved equivalent product/quality meeting technical specifications with necessary fittings , with all connections complete including chasing if necessary and making good, cleaning and commissioning all as per specifications and drwaings and as directed. by the Engineer-in-charge. (Only 32 mm/40 mmdia G.I.line required for Metropole flushvalve water supply will be measured and paidseperately under relevent Item) |
| 19 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with 32mm Metropoleflush valve. As per Drg. no. A&SED/AR/1030/03/SD/A3-001/R0 |
| 20 | ProvidingandfixingHeavyquality flexiblePVCwastepipeof following dia. (semi rigid or flexible) of approved makeor approved equivalent product/quality meeting technical specifications for sink or wash basin including PVC waste fittings etc. complete all asper specifications and as directed by the Engineer-in-charge |
| 21 | 32 mm dia flexible PVC (semi-rigid) waste pipe |
| 22 | Providing and fixing heavy qualityC.P .brass waste coupling of following dia for wash basin and sink, of approvedmake or approved equivalent product/quality meeting technical specifications, sizeand quality all as directed complete |
| 23 | C.P BrassWaste coupling 32 mm Dia Half threaded or Full threaded as per requirement. |
| 24 | Providing and fixingheavy qualityCP brassbottle trap 31 / 32 mm of approved make or approved equivalent product/quality meeting technical specifications single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, for wash basins / urinal etc all as per specifications and directed by the Engineer in charge. As per Drg. no. A&SED/AR/1030/03/SD/A3-001/R0 |
| 25 | Providing and fixing 15 mm PVC inlet connection suitable for hot and cold water 600 mm long with nuts andwashers complete for wash basins/ Urinals etc. with all necessary acessories complete as directed by the Engineer-in-charge |
| 26 | Providing and fixing viterious China wash basin of approved make or approved equivalent product/quality meeting technical specifications andcolourwithC.I.brackets,15mC.P.brasspillartapof approved make or approved equivalent product/quality meeting technical specifications,15 mm x 600mm longPVC Inlet connection,32 mm heavy quality C.P. brass waste couplingof standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge |
| 27 | White vitreous Chinacounter top / counter below wash basin of size 560 x 410 mm /560 x 450 mm with single 15 mm C.P. brass pillar tap. (Oval / Round Models) As per Drg. no. A&SED/AR/1030/03/SD/A3-001/R0 |
| 28 | Providingandfixing heavyqualitystainlesssteel/C.Pbrass gratingof approved equivalent makeas specified for floor traps / nahani traps all as directed by the Engineer-in-charge |
| 29 | SS grating 125 mm dia |
| 30 | Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1Nos125mmdiaC.Pbrassgrating, completeallas specifications and drawings and as directed by the Engineer-in-charge |
| 31 | Providing and fixing heavy quality health faucetwith 1.50 metres long flexible hose (handshower) ofapproved make or approved equivalent product/quality meeting technical specifications with wall brackets and type as per specifications and as directed by the Engineer-in-charge |
| 32 | Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality ofapproved make or approved equivalent product/quality meeting technical specificationsas per specifications and as directed by the Engineer-in-charge |
| 33 | Providing and fixing C.P brass 2 wayAngle cock (2 Angle cock combinationin single fitting) of heavy quality of approved make or approved equivalent product/quality meeting technical specifications as per specifications and as directed by the Engineer-in-charge |
| 34 | Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make or approved equivalent product/quality meeting technical specifications including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 35 | 15 mm n.b |
| 36 | 20 mm n.b |
| 37 | 25 mm n.b |
| 38 | 32 mm n.b |
| 39 | ProvidingandfixingC.Pbrassbibcockofheavyqualityof specified / approved make or approved equivalent product/quality meeting technical specifications as per specifications and as directed by the Engineer-in-charge |
| 40 | 15 mm diabib cock. |
| 41 | Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make or approved equivalent product/quality meeting technical specifications, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge |
| 42 | 15 mm n.b CP brass Angle cock |
| 43 | Dismantlingdoors,windowsandclearstoreyopenings(steel/wood)shutterincludingchowkhats,architraves,holdfastsetc.complete and stacking within 100 m lead (full windows) Of area 3.00 SqM and below |
| 44 | Dismantlingstoneslabflooringlaidincementmortarincluding stacking of serviceable materialsand disposal of unserviceable materials within 200 m lead |
| 45 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m leadFor thickness of tiles above 25 mm and up to 40 mm |
| 46 | Dismantling brick bat coba cement based water proofingover roof and chajjas carefully without damaging adjacent structures including lowering andstackingofmaterialsanddispoalof unserviceablematerialswithin200mleadasperdirectionof Engineer-in-charge |
| 47 | Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoalofunserviceablematerialswithin100mleadasper direction of Engineer-in-charge |
| 48 | Dismantling plaincementconcrete manually/bymechanical meanscarefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in charge |
| 49 | Dismantling of RCC works includingCuttingand stacking of steel reinforcement bars and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge |
| 50 | Dismantling old plaster / skirting carefully ,raking out joints and cleaning the surface for plaster includingdisposal of rubbish to the dumping ground within 100 m lead |
| 51 | Lead charges for lead Exceeding 3 KM but Nost exceeding 4 KM, by mechanical transport including loading, unloading, stacking / levelling etc. |
| 52 | Debris Beyond 3 Km but up to and including 4 km Note: The rates in respect of this item is applicable for NET Quantities arrived at after making deduction for voids @ 30% from corresponding TRUCK Measurement |
| 53 | Providing and fixing anosdisedaluminium baby latch of size 75 X 12mm ISImarkedofapprovedmake or approved equivalent product/quality meeting technical specificationstransparentordyedto requried colour or shade with necessary screws etc. |
| 54 | Providing and fixing anosdised aluminium tower bolts of size 250 X 12 mm ISI marked of approved make or approved equivalent product/quality meeting technical specifications, transparent or dyed to requried colour or shade with necessary screws etc. |
| 55 | Providing and fixing IS:12817 marked stainles steel butt hinges of size 125 x 64 x 2.5mm (heavy weight) of approved make or approved equivalent product/quality meeting technical specifications with stainless steel screws etc. complete as directed by the Engineer-in-charge |
| 56 | ProvidingSFMCMicroconcreteforstrengtheningofstructural membersincluding mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge Using 100% SFMC |
| 57 | Providing and fixing Aluminium Grill 10 mm thickin natural Silver anodising of min 15 Microns with a opening size of 80 mm x 66 mm and Minimum weight of 3.13 Kg/ Sq.M including providing and fixing Suitable \"F\" /\"H\" section outer frame and mullion fixing with screws complete allas per specifications and as directed at site by the Engineer-in-Charge .Aluminium alloy shall be of 6063-T6 with Yield strength of minimum 6.5 kg/ sq.mm. |
| 58 | Providing and fixing25 mm thick Colour PVC Integral Sheet door shuttersflush door of approvedcolour, approved make or approved equivalent product/quality meeting technical specifications, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required with S.S. screws. etc (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Noste : The door should satisy the following technical parameters as under:1. Density : 0.475 to 0.55 g/cc, 2. Hardness (Shore \"D\"): min. 55, 3. Water absorption : max. 1 %, 4. Tensile strength : min. 13 MPa, 5. Elongation : min. 15 %, 6. Flextural Strength min. 30 MPa,7. Compressive Strength at 10% Deformation : min. 3 MPa, 8. Vicat Softening Temperature: more than 75 Deg Celcius9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard) |
| 59 | Providing15 mmthickplasteringusingReadymixinternal plasteringcompoundofapprovedmake or approved equivalent product/quality meeting technical specifications forinternal facesof brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding completeall as per specifications and as directed at site by the Engineer-in-charge.Note: Actual Areas will be measured |
| 60 | Providing and fixing IS: 3564 marked aluminium diecast body tubular type universal hydraulic door closer of approved make or approved equivalent product/quality meeting technical specifications with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge |
| 61 | Providing and fixingG.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge includingcutting,fixingwithnailsinpositionbeforeplastering complete all as directed by the Engineer-in-charge. (only area of the chicken mesh used alone will be measured) |
| 62 | Providing and laying water proofing treatment in sunken portions of WCs, bath rooms etc. by appying cement slurry mixed with water proofing cement compound consisting of applying: (a) 1st layer of slurry of cement @ 0.488 kg / sq.m mixed with water proofing cement compound @ 0.253 kg per sq.m.including injecting cement slurry .This layer will be allowed to air cure for 4 hours. (b) 2nd layer of slurry of cement @ 0.242 kg / sq.m mixed with water proofing cement compound @ 0.126 kg / sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for48 hours.Therateincludespreparationofsurface,treatmentand sealing of all joints, corners, junctions of pipes and masonry with cement slurry. Finishing the surface with 20 mmthick jointless cementmortarofmix1:4(usingcrushedsand)admixedwith proprietary water proofing compound conforming to relevant IS and approvedby Engineer-in-chargeincluding mixingfibre at the rate of 125 grams per 50 kg of cement in top layer of plasterandfinallyfinishingthesurfacewithtrowelwithneat cementsluryinbottomandallthesidesofsunkenportion. complete as directed by the Enginer-in-charge. The treatment to betested for water tightness before filling the sunken areas. |
| 63 | ProvidingandfixingGlazedVITRIFIEDfloortilesofapproved make in different sizes conforming to IS 15622 inall colours and shades in Glossy or Matt or satin finishlaid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints withwhite cement based Tile Grout of approved make or approved equivalent product/quality meeting technical specifications and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge. As per Drg. no.A&SED/AR/1030/03/SD/A3-001/R0 Using Tiles of size 600 X 600 mm |
| 64 | Providing and fixing mirror of superior glass of approved quality and of required shape and sizewith 6mm thickPlain A.C sheetbacking fixed to walls with consealed Brass C.P Mirror screws andconsealed washers etc.complete all as per specifications and as directed by Enginner-in-Charge.\"Note: The Granite and Aluminium section if used will be paid under respective items |
| 65 | Providing, laying , jointing, fixing and testing heavy quality ( (ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint, all as directed by the Engineer-in-charge. Pipeswith ISI marked \"C\" -Class heavy quality pipes of approved make. |
| 66 | 20 mm dia G.I pipe |
| 67 | 25 mm dia G.I pipe |
| 68 | 32 mm dia G.I pipe |
| 69 | 40 mm dia G.I pipe |
| 70 | Providing and fixing anosdized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make or approved equivalent product/quality meeting technical specifications conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) Note: Thickness of Anodising will be checked at site and the contractor has to be make arranement for Alcometer( anodising thickness chekcing instrument) . |
| 71 | Anosdised Aluminium sections (Minimum anosdizing thickness of 15 micron) |
| 72 | Extra for colour anodizing |
| 73 | Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) With clear float glass panes of 5.00 mm thickness |
| 74 | Providing and Laying cement concrete 1:2:4 in super structure (1cement, 2 crushed sand, 4 brick aggregates 20 mm to 40 mm)for filling sunkenfloorsoftoilet bath&kitchenadmixedwith proprietary water proofing compound as per manufacturer\"s specificationsandapprovedbyEngineer-in-charge including scaffolding, consolidation, finishing curing etc. Note : The minimum cement content for Cement Concrete works should be as per the latest revision of the relevant IS code. |
| 75 | Providing and fixing Satin finishstainless steel AISI 304 (18/8) kitchen sink of size 610 x 510 mm without drain boardand bowl size 545 x 445 x 200 mm depth as per IS13983 of approved make or approved equivalent product/quality meeting technical specifications, with C.I. brackets, fittings and stainless steel plug 40 mm including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried complete as per specifications and as directed by the Engineer-in-charge. As per Drg. no. A&SED/AR/1030/03/SD/A3-001/R0 |
| 76 | Providing and constructing Half brick masonry using Flyash/ Flyash Lime bricks in suerstructure upto floor II level with minimum 70 kg / Sq.cm strength of approved make or approved equivalent product/quality meeting technical specifications and size in partition walls in C.M 1:4 using crushed sand including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement. (Note : Reinforcement will be paid under relevant item) |
| 77 | Removing/dismantling the sanitary appliances along with all connections, chiselling the embedded portions, screwing out all inter connections and proper plugging of the inlets and outlets to avoid leakages/water spilling etc.from all the floor level stacking the dismantled materials within 50 mtr. lead and as directed by Engineer-in-charge. |
| 78 | Dismantling Water closet, bowl type/flat back urinals with cisterns, Wash basin, flushing cistern of any size, sinks etc., including stacking of useful materials near the site and disposal of unserviceable materials within 200 m lead |
| 79 | Existing GI/CI/PVC/UPVC/CPVC etc. pipelines along with all fixtures & resurfacing the surface if required with existing finish etc. complete as directed. |
| 80 | Shower, Bib tap, stop cock, piller tap, gate valve,ball cock, Nahani trap,bottle trap,urinal spreader, Flush cock. |
| 81 | Providing and fixing Urinal partition with 12 mm thick frosted/ acid etched glass with stainless steel wall to glass (90 degree) Polished chrome finish glass bracket including fixing in walls with necessary screws & fastners complete all as per drawings and as directed by Engineer in charge Frosted glass partition in toilet/ patch fitting |
| 82 | 12 mm thick etched glass |
| 83 | Polished Chrome Finish Glass bracket ( Wall to Glass) |
| 84 | Providing & fixing metallic bottle type with minimum overall height of 180mm and minimum bottle diameter of 50mm liquid SOAP DISPENSERof approved equivalent product/quality meeting technical specificationswith C.P. brass screws / SS clamps as per product drawings. |
| 85 | Providing andfixing stainlesssteel AISI 304 (18/8) satin finish kitchen sink with drain board with over all size of 1145 x 510 mm and bowl size of 560 x 410 mm and 200 mm depthof approved make and model or approved equivalent product/quality meeting technical specifications with C.I. brackets and stainless steelwaste coupling, fittings,including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried.complete as per specifications and as directed by the Engineer-in-charge. (As per Drg. no. A&SED/AR/1030/03/SD/A3-001/R0 ) |
| 86 | Providing and fixing 35 mm thickflush door shutters conforming to IS : 2202 Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneeringwith internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete. |
| 87 | Providing and fixing aluminium handles175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make or approved equivalent product/quality meeting technical specifications, anosdised transparent or dyed to req. colour or shade with necessary screws etc. complete. |
| 88 | Providing and fixing stainless steel satin finish Corner grab bar of approved equivalent quality or product meeting technical parameters 650 mm horizontal and 460 mm vertical made out of 32 mm dia , SS 304 wall mounted fixing with suitable SS screws including labour etc complete as directed by the Engineer-in -charge. |
| 89 | Providing and fixing C.P brass towel rail of approved make or approved equivalent product/quality meeting technical specifications 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in- charge. |
| 90 | Providing , centering ,shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings specificationsandasdirectedbytheEngineer-in-chargeatall levels |
| 91 | For Super Structure |
| 92 | Cuddapah stone slab over Kitchen Platform to support Granite Slab etc. using 25 mm to 30 mm thick machine cut double machine polished slabs in single piece upto a maximum length of 1.80 metres laid over 20 mm thick cement mortar bedding 1:4 finished to proper levels, cured etc. complete |
| 93 | Providing, supplying, fixing in position, under floors or in walls sand cast iron pipes including required specials like bends, tees, \"Y\" collars, cowl etc for soil, waste and ventilation pipes conforming to IS.1729 or Cast Iron hubless pipes confirming to IS 15905 of approved make or approved equivalent product/quality meeting technical specifications including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site. |
| 94 | 75 mm dia sand cast iron S&S pipe as per IS:1729 with 0.90 kg lead / joint or Cast Iron hubless pipes confirming to IS 15905 |
| 95 | 100 mm diasand cast iron S&S pipe as per IS:1729 with 1.00 kg lead / joint or Cast Iron hubless pipes confirming to IS 15905 |
| 96 | Carrying out core cutting beyond 50 mm up to and including 100 mm Dia. size in RCC slab at various levels using Non Vibrational core drilling machine attached with circular Diamond cutting core bit as required at site & as per instruction of Engineer-in-Charge including labour, material, machine, consumable tools & tackles etc. with safety precaution etc. complete. Breaking of brick bat coba and plaster will measured and paid in relevant item |
| 97 | Providing safety Personnel Protective Equipments (PPEs) ofmake or approved equivalent for engineers, supervisors and workers including transportation, delivery, storage in good condition ,maintaining issue records etc. as instructed by Engineer in-charge. Note: All these items issued for use shall be handed over to the department on completion of the work. |
| 98 | Hand Gloves - with 2 Thread Poly-cotton premium quality cotton as per IS:4770–1991 (Reaffirmed 2001) |
| 99 | Safety shoe-as per IS:15298 Part 2 or EN 345 |
| 100 | Safety helmets as per IS 2925 : 1984 (Reaffirmed 2000) or EN 397 CE marked approved including helmet refill with sweat band, chin strap, air slot for ventilation etc.,material ABS Suspension 8 point plastic craddle rachet fit adjustment,adjustable chin strap,sweat band brushed cloth on foam of approved color. |
| 101 | Safety helmetinjection molded fibreglass compound suspension,4 point textlie with rachet fit adjustment,adjustable chin strap,high qualitysweat band,size 53-60 cm conforming to IS:2925:1984,ISI marked and of approved color. |
| 102 | Refill for safety helmets -For safety Helmets as mentioned under Item No. 68.3 |
| 103 | Providing & applying polymer modified, liquid applied, crack bridging, elastic, 2-pack acrylic polymer modified cementitious water-proofing coating system on concrete /plastered wall surfaces. The waterproofing chemical shall have following properties:(a) Tensile strength of not less than 2.0 N/mm2, (b) Adhesion strength of not less than 1.0 N/mm2, (c) Elongation not less than 35%, (d) crack bridging abilty shall be upto max. 1mm, (e) Water Permeability shall be passing 5 bar positive water pressure.The substrate must be prepared by suitable mechanical preparation techniques such as high pressure water jetting, needle guns, blast cleaning etc. and properly pre-wetted to a saturated surface dry (SSD) condition. Blast clean to remove all contaminants within pores /blowholes. Mixing of mortar shall be carried out as per manufacturers specification using slow speed paddle mixer (500-600 rpm). Subsequently, application of mortar and curing shall be carried out as per manufacturer\"s specifications all as per the directions of the Engineer-in-Charge at all levels and locations complete.Note: 1) Scaffolding will be measured and paid under relevant item. 2) The cost of removing existing paint, putty, scrapping & surface preparation before applying this item shall be included in the rates quoted by the bidder(s). |
| 104 | Supplying man power along with necessary spades, shovels, punjas, ropes, small special spades, rain coats, broom, mop etc, minimum two labours per day and maximum any number of labour as and when decided by Engineer Incharge to work for eight hours per day to carry out the cleaning work, loading work etc as directed by Engineer Incharge. |
| 105 | Providing Reinforcement Steel for reinforced cement concrete at alllevelsincludingsupplying,preparationofbarbending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coatedG.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. |
| 106 | Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractormanufactured confirming to IS:1786. |
| 107 | Providing Structural steel work in M.S Plain Plates and chequrred Platesfor Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approvedzinc chromate steel primer etc.including cost ofstructural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Note: 1) Structural steel required for the work shall not be supplied by the Department and the contractor has to procure the same. 2) Welding weights, connections, bolts and nuts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. 3) All holes will be made by drilling only. Gas cutting of holes will not be permitted. |
| 108 | Using materials of approved manufacturers confirming to IS:2062. All test reports to be provided along with the supply of the materials. |
| 109 | Providing and fixing in position suspended false ceiling system using 12 mm thick calcium silicate boards 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KCplaced in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thickshall be suspended at 1200 mm centres along the length of ceilingwith 4mm dia G.I wires/ 1 mm thick strip hangers made ofG.I sheet sections with necessary level adjusters andinter channelsof 0.90mm thick with connecting clips andresting on the perifery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures,diffusers,trapdoorsetctobemadeasperlayout drawings and as per directions of Engineer-in-charge.The main teesto besuspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mmand4mmdiaG.Iwirewithgalvanised spring steel levelling clips/G.I strip Hangers at 600mm centers . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/SqM (Only calcium silicate false ceiling area will be measured for the purpose of payment)Note: All packing for openings/side margin of false ceilings/strips etc will be paid under this item) |
| 110 | Providing, Supplying, transporting materials, drilling holes by rotary hammer drill, dust removing, batching, mixing of resin and hardener, inserting & anchoring rebars of specified diameter in existing concrete surfaces using resin based anchoring grout and necessary rebaring of reinforcement steel with 10 d depth of drilling. (The payment of Steel rebar\"s shall be paid separately) Note : Post-installed epoxy adhesive anchor designed as per EN 1992-4, suitable for non-cracked and cracked concrete C 20/25 to C 50/60, ETA approval for seismic performance category C1, ETA Data for 100y working life, High loading capacity, Suitable for dry and water saturated concrete,product shall have certification/ approvals of European Technical Assessment ETA issued by CSTB , Engineering Judgement (120-years working life based on EAD 330499-01-0601 issued by BERGMEISTER, Vienna,Shockproof fastenings in civil defence installations issued by Bern, Federal Office for Civil Protection, Bern) |
| 111 | 12 mm dia/ 131 mm |
| 112 | Supplying and fixing Cast IronMan hole or Cast Iron Steps cover of approved make or approved equivalent product/quality meeting technical specifications and weight as specified in the drawings or as directed by the Engineer in charge. |
| 113 | Modification to existing door frame alongwith ventilator including removing of architrave, existing glass,beading patti,old shutter, fixing plywood of 6mm thick, filling the grooves,offsets, gaps, in wooden frame using teakwood batten/strips wherever required, finishing the existing frame to proper size, line and level to receive new shutter,fixing new glass and new beading patti, fixing approved laminate to properly cover the frame and all necessary works as directed by the Engineer-in Charge to match the sample door frame complete.(Note:(1) Dismantling of Door shutter, Teakwood battens/strips,new shutter, plywood, lock set will be paid under relevant items of the BoQ.All other costs for consumables, wastages etc will be deemed to be included in the quoted rate.(2) Sample door frame shall be prepared and got approved from Engineer-in Charge before commencement of work) (3) Only masonry wall opening of door will be measured once for payment) |
| 114 | Earth work excavation by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layerwellrammedandconsolidatedincludingdisposingthe surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete and as directed by the Engineer-in-charge. |
| 115 | From 0.00 to 1.50 m depth from Average Ground Level |
| 116 | From 1.50 to 3.00 m depth from Average Ground Level |
| 117 | Providingandfixingdecorativehighpressure1.5mmthick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed. (Note: Shade,design,pattern & colour shall match the existing door laminate in CED building) |
| 118 | Grouting the existing damaged terrace/ chajja water proofing with neat cement slurry including cleaning the suface with pressure water jet, wire brush etc., complete including cost of cement and all materials required for groutng process as per the instruction of the Project Engineer |
| 119 | Providing and injecting approved Non shrink cementitious grout in proportion recommended by the manufacturer into cracks/holes/gaps/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected. |
| 120 | Supply&Installationof StainlessSteel304handdryerwithbrushmotorerial,Power 1650W,VoItageAC220-240V, 50/60Hz,OperationTouchFreeInfra-RedActivation,Auto CutOff30Sec,Speed25000RPMNosiseLevel80db(A),HeaterElementHeatingPTC Element, Air Speed 85-95 m/s, Drying Time 15 s, Motor Brush Motor, Blowing Volume 150 m3/h,Waterproof IPX1,Weight12Kg,category hand dryer machine as per direction ofEngineer-In-Charge. |
| 121 | Providing and fixing chloronated PVC(CPVC) pipes, slives having thermal stablity for hot and cold water supply (as ASTM standard 2846 and SDR -11Grade) or as outlets in cluding all cpvc plain and brass threaded fitting ,fixing the pipewith clamps, including chasing the wall consealing the pipe and making good the same etc.This includes jointting of pipe and fitting with cpvc solvent sealent and testing the joints complete all as per specification, Drawing ,and as directed by EIC |
| 122 | 50mm Outer Dia CPVC Pipe (External / Open). |
| 123 | Supply and laying Pebbles of various sizes upto 1-2 Inch and colour in Gloss / Matt Finish of approved shadeat required location and pattern and as directed by the Engineer -In-Charge.Note: Refer dwg no. A&SED/AR/1030/01/TD/A2-003/R-1 |
| 124 | Providing and fixing in position Cobble stone 100mm x 100mm x 100mm in flooring, laid over 20mm thick mortar bedding / fixing on green concrete, close jointed & pointed with matching cement slurry, finished to levels, slope or plumb as required, including curing, polishing etc. complete. The sample is to be got approved by the Architect before procurement.Note: Refer dwg no. A&SED/AR/1030/01/TD/A2-003/R-1 |
| 125 | Providing, placing and compacting yellow jaisalmer stone chips as per drawings etc. complete and as directed by Engineer In-ChargeNote: Refer dwg no. A&SED/AR/1030/01/TD/A2-003/R-1 |
| 126 | Providing, placing and compacting white marble chips of approved shade as per drawings etc. complete and as directed by Engineer In-ChargeNote: Refer dwg no. A&SED/AR/1030/01/TD/A2-003/R-1 |
| 127 | Providing and embedding 20mm thick and 150 mm wide white marble strips in concrete bed as per drawings etc. complete and as directed by Engineer In-ChargeNote: Refer dwg no. A&SED/AR/1030/01/TD/A2-003/R-1 |
| 128 | Providing and embedding 20mm thick and 150 mm wide thick yellow jaisalmer stone strips in concrete bed as per drawings etc. complete and as directed by Engineer In-ChargeNote: Refer dwg no. A&SED/AR/1030/01/TD/A2-003/R-1 |
| 129 | Providing, supplying and laying fluted granite tiles of approved shade in flooring over20 mmthick base cement mortar 1:4 (using crushed sand) laid and placedwith grey cement slurry includingfilling the joints with matching whitecement basedtile groutcomplete all as per specifications and drawings etc. complete and as directed by Engineer In-ChargeNote: Refer dwg no. A&SED/AR/1030/01/TD/A2-003/R-1 |
| 130 | 18mm thick fluted granite tiles |
| 131 | 12mm thick fluted granite tiles |
| 132 | Providing, supplying and laying leather finished granite tiles in flooring / wall cladding over20 mmthick base cement mortar 1:4 (using crushed sand) laid and placedwith grey cement slurry includingfilling the joints with matching whitecement basedtile groutcomplete all as per specifications and drawings etc. complete and as directed by Engineer In-Charge.Note: Refer dwg no. A&SED/AR/1030/01/TD/A2-003/R-1 |
| 133 | 20mm thick leather finished black granite tiles |
| 134 | 12mm thick leather finished black granite tiles |
| 135 | Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levelsNote: Refer dwg no. A&SED/AR/1030/01/TD/A2-003/R-1 |
| 136 | Providing and constructing Brickwork in cement mortar1:4 using crushed sand withFlyash/ FlyashLime bricks with minimum 70kg/ sq.cm strength of approved make or approved equivalent product/quality meeting technical specifications and size in Superstructure up to and including FloorIILevel including, scaffolding, raking out joints,curing,cleaningcompleteallasperspecificationsand drawings. |
| 137 | Providing and laying CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile indigenously manufactured from high quality polypropylene staple fibres (continuous filament will not be accepted) on the prepared subgrade for separation, drainage & filtration application with necessary overlaps as per drawing etc. complete. (Specification: MORTH Section-700 ) with prior approval of Engineer In-ChargeNote: Refer dwg no. A&SED/AR/1030/01/TD/A2-003/R-1 |
| 138 | Providing20 mm thick plastering using Ready mixexternal plastering compound ofapproved make or approved equivalent product/quality meeting technical specifications for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaningscaffoldingup to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge |
| 139 | Providing, placing and compacting dry river coarse sand as directed by Engineer In-charge |
| 140 | Supplying , cutting to shape and fixing specified diameter UPVC pipes as per IS 4985 in RR Masonry/ RCC walls for weep holes complete all as per drawings and as specified at site. 90 mm dia UPVC Pipes |
| 141 | Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge |
| 142 | Providing and fixing 304 grade Stainless Steel pipes, edge angle, grating, counters, hand rails etc. of approved size and make and qaultiy by welding, mirror/mattt polishing, fixing at site etc. for pipe line, edging, grating including special sections as per drawings, specifications, etc. complete as directed by the Engineer- in- incharge. All SS sections, SS angles, SS flats, SS plates, SS tubular sections etc. will be measured and paid in this item. Note: 1) Stainless steel required for the work shall not be supplied by the Department and the contractor has to procure the same. 2) Welding weights, connections, bolts and nuts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. 3) All holes will be made by drilling only. Gas cutting of holes will not be permitted. |
| 143 | Electrical: SITC of Lighting fixtures as per TSS 1 of Electrical specification |
| 144 | Silicone extrusion Flexible linear LED light (IP 67 or above) with Driver |
| 145 | LED Outdoor spot Light with spike |
| 146 | 12W Lighting fixtures Recess type approx 150mm dia |
| 147 | SITC of 3 Way (4P) IP68 Waterproof Electrical Junction Box for 4C X2.5 sqmm TRS wire as per TSS 2 of electrical specification |
| 148 | SITC of TRS wire 4C X 2.5 Sqmm as per TSS 3 of Electrical specifications |
| 149 | SITC of PVC rigid Conduit as per TSS 4 of Electrical specifications |
| 150 | SITC of Light point wiring as per TSS 5 |
| 151 | Primary Switch box points with 2.5 sqmm FRLS wire |
| 152 | Secondary Switch box points with 2.5 sqmm FRLS wire |
| 153 | Primary lighting points with 1.5 sqmm FRLS wire |
| 154 | Secondary lighting points with 1.5 sqmm FRLS wire |
| 155 | SITC of power point wiring as per TSS 6 |
| 156 | Primary power points with 2.5 sqmm FRLS wire |
| 157 | Secondary power points with 2.5 sqmm FRLS wire |
| 158 | Removal of Electrical Items cable/conduit/lighting fixtures as per TSS 7 |
| 159 | Removal of all type DB/switchbox |
| 160 | Removal of lighting fixtures |
| 161 | Removal of cables/conduit/wires upto 50mm dia |
| 162 | SITC of fans as per TSS 8 |
| 163 | Exhaust fans powered by BLDC motor, Sweep 200mm |
| 164 | SITC of 5A socket with 2 module box as per TSS 9 |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
| 8 | Click here to download tender document | Tender Documents |
| 9 | Click here to download tender document | Tender Documents |
| 10 | Click here to download tender document | Tender Documents |
| 11 | Click here to download tender document | Tender Documents |
| 12 | Click here to download tender document | Tender Documents |
| 13 | Click here to download tender document | Tender Documents |
| 14 | Click here to download tender document | Tender Documents |
| 15 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
