|
| 1 | Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single armbracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. (SI No-641/2018) |
| 2 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 120 Watt. Confirming to IP 66 Protection complete in all respect as per direction of E/I. Cat-AAA S. No. 1424/SOR 2018 |
| 3 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. SI No-652/2018 |
| 4 | 501 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (h) 10sq.mm 4 core |
| 5 | 501 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 16sq.mm 4 core |
| 6 | S&F of 63 Amp. 415 V matal clad TPN Rewirable type switch fuse unit complete on angle iron bracket complete in all respect. CAT-B. S.O.R.-18 316 |
| 7 | Supply & Burying of Earth Rod 20mm dia 2.50 mtr long (PSR) |
| 8 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 200 Watt. Confirming to IP 66 protection complete in all respect.CAT- AAA SI. No 1455/SOR 2018 |
| 9 | S / L of HDPE ( Dwc pipe for road crossing etc. (Pre sanction Rate) ( i ) 76 / 63mm ( O.D / I.D ) |
| 10 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SI No-504/2018 16 sq. mm (d) |
| 11 | 504 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. (c) 10sq.mm |
| 12 | 1002 S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve CAT- A |
| 13 | Supply of 2.5 mm x 2 Core aluminium unarmourd Cable (PSR) |
| 14 | Making manual Trench less/Road cutting. (PSR) Please Enable Macros to View BoQ information |
