Tender For Road Construction Work Using Hot Mix Asphalt From The Grp Sp Office To The Police Quarters Under Lohamandi Zone, Room No. 76, Agra-Uttar Pradesh
TDR : 53827735
Tender Notice
BOQ
1 Days Left
Agra
Uttar Pradesh
Tender For Road Construction Work Using Hot Mix Asphalt From The Grp Sp Office To The Police Quarters Under Lohamandi Zone, Room No. 76
Name of Work:- Yksgkeamh Tksu D{K La[;K&76 Ds Vurxzr Th-Vkj-Ih- ,L-Ih Dk;Kzy; Ls Iqfyl Dokvzj Rd Gkwvfedl }Kjk Lm+D Fuekz.K Dk Dk;Za
Sl. No.
Item Description
1
Providing laying, Spreading & Compacting graded stone aggregate of approved quarry to wet mix macadam (WMM) specification including premixing the material with water at O.M.C. in machenical mix plant carriegeor mixed material by tipper to site, lating in uniform layers with paver in sub-base/base course on wall prepared surface and compacting with vibratory roller to achieve the desired density complete as per MoRT&H clause 406 & as directed by Engineer incharge including all machinery charges & including all labour, T&P etc. required for proper completion of the work as per M0RT&H specification 406.
2
Providing & Applying priming coat with bitumen emulsion on on prepared surface of granular base including cleaning of road surface and spreading primer at the rate of 0-70 Kg./Sqm. Using machanical means. Before Applying prime coat. The surface will be cleaned with Machanical broom and water will also be sprinkled with water tanker to keep the surface Moist. The Prime Coat will be applied 24 Hrsbefore the application of bituminous course including all taxes, Material, Labour, T&P etc. required for proper copletion of the work.
3
Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premixed with bituminous bider @ 3.50 percent by weight of total mix and filler, transporting the hot mix to work site laying with hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause 507 complete in all respects.
4
Providing and applying tack coat with bitumen emulsion using pressure distributor at the of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.
5
Providing and laying semi-dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premixed with bituminous bider @ 5.00 percent by weight of total mix and filler, transporting the hot mix to work site laying with hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause 508 complete in all respects.
6
Providing and laying hot applied thermo plastic compound 2.5 mm thick including refletrorising glass beads @250 gm/sqm. Area, thickness of 2.5 mm is exclusive of surface applied glass beads as per I.R.C. 35. The finish surface to be level, uniform and free from steaks and holes. Composition of thermo plastic material shall be as per table 800–3 of clause 803 of MORTH including cost of work as direction E/IC. (Chapter-19 Miscellaneous Sr. No. 7)
7
Providing and Fixing CAT EYE etc.
8
Sub Total
9
Add/Deduction Rs. For Estimate Figure Amount Match
10
Grand Total Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
