|
| 1 | Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. |
| 2 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required .i) 3½ X 25 sq. mm (28mm) |
| 3 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required .i) 3½ X 95 sq. mm (45mm) |
| 4 | Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (i) 3½ X 95 sq. mm |
| 5 | (Supplying and laying of following sizeDWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming toIS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench/foundation/Surface complete as required. i)63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 6 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 7 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 8 | Earthing with G.I. earthing Electrodes 2 metre long, 25 mm dia including accessories, and providing connection with GI/MS poleby existing 25mm X 6 mm GI strip as required. |
| 9 | Providing and fixing of ofGI clamps made of25x3 mm GIstrip on existing pole HDPE pipe with nut/boltsi/c aluminium painting on strip etc. complete as required or direction of engg in charge.. |
| 10 | Supplying and laying of 3.5 X 25 Sqmm one number PVC insulated and PVC sheathed / XLPE armoured Aluminium cable of 1.1 KV grade as per IS 7098 (Part 1) 1988, direct in ground including excavation and refilling the trenchetc as required, but excluding sand cushioning and protective covering etc. as required. . |
| 11 | Supplying and laying of 3.5 X 25 Sqmm one number PVC insulated and PVC sheathed / XLPE armoured Aluminium cable of 1.1 KVgrade as per IS 7098 (Part 1) 1988 in the existing RCC/ HUME/ METAL/ pipe,surface as required.. . |
| 12 | Supplying and laying of 3.5 X 70 Sqmm one number PVC insulated and PVC sheathed / XLPE armoured Aluminium cable of 1.1 KVgrade as per IS 7098 (Part 1) 1988, direct in ground including excavation and refilling the trenchetc as required, but excluding sand cushioning and protective covering etc. as required. . |
| 13 | Supplying and laying of 3.5 X 70 Sqmm one number PVC insulated and PVC sheathed / XLPE armoured Aluminium cable of 1.1 KVgrade as per IS 7098 (Part 1) 1988, direct in the existing RCC/ HUME/ METAL/ pipe,surface as required. |
| 14 | Fabrication,Supplying ,installation,testing and commissioning ofcubical type padestal mounted outdoor Junction Feeder Pillar of size 550mmX550mmX450mm made out of 1.6 mm. thickCRCA sheet complete and mounted on 35mm x 35mm x 5mm thickangle iron frame i/c same size of angle 04 nos. legs 500mm lenght erected in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation (min 0.099cum) including excavation & refilling,hinged front & back doors with latch locking arrangements,with provision of fixing of glands at the bottom, antirust design, air ventilation grooves, water drop proofing arrangement ,insluators,earthing studs & making connection with 25mm x 5 mm 2 mtr GI strip,nuts bolts etc.as required including connections,interconnetions , painting with primer & finish paint with synthetic enamel paint , 04 nos aluminium bus bar strip suitable for 200 A,415 V capacity with suitable insulated support for aluminium bus bar complete as required . CG box/panel should be made CPRI approved from authorized fabricators. |
