|
| 1 | For Services |
| 2 | Preventive & Breakdown Maintenance of 20T / 5 T EOT Crane (SA 2 & SC 3) |
| 3 | Preventive & Breakdown Maintenance of 60T / 10 T EOT Crane (W/S B & CAS) |
| 4 | Preventive & Breakdown Maintenance of 90+90 /16 T EOT Crane (W/S C) |
| 5 | Preventive & Breakdown Maintenance of 5 T EOT Crane (ENGG W/S) |
| 6 | Preventive & Breakdown Maintenance of 10/2 T EOT Crane (STORE COMPLEX) |
| 7 | Preventive & Breakdown Maintenance of 50/10 T EOT Crane (MODULE SHOP) |
| 8 | For Spares |
| 9 | Sinamics G120, PM250, 45 kW |
| 10 | Sinamics G120, PM250, 30 kW |
| 11 | Sinamics G120, PM250, 5.5 kW |
| 12 | Sinamics G120, PM250, 18.5 kW |
| 13 | Sinamics G 120, PM250, 75 kW |
| 14 | Sinamics G120, PM250, 15 kW |
| 15 | Sinamics S120, PM340,110kW, 3Ø, 415Vac |
| 16 | Sinamics G120, PM250, 55kW, 3Ø, 415Vac |
| 17 | Sinamics G120, PM250, 11kW, 3Ø, 415Vac |
| 18 | Control Unit CU240 S |
| 19 | CU320 without CF card |
| 20 | PLC, CPU, SIMATIC S7-300 CPU 314C-2PN/DP, Central processing unit with 192 Kbytes working memory,24DI/16 DO,4AI,2AO,1PT100,4 Fast counters (60kHZ)1.Interface MPI/DP 12MBIT/S, 2.Interface Ethernet Profinet with 2 port switch, Integrated 24Vdc power supply, Front connector (2 x 40 pin) and Micro Memory card |
| 21 | MMC, Micro memory card 512KB. |
| 22 | IM 153-1 maximum 8 SM modules |
| 23 | SM 321 DIG I/P 32 x 24 VDC |
| 24 | SM 321 DIG I/P16 2 x 24 VDC |
| 25 | SM 322 DIG O /P 32 CH 24 V DC |
| 26 | Encoder module |
| 27 | Encoder, Hollow shaft, 60ppr, 24V DC |
| 28 | Microprocessor trip unit, 3P, fixed overload & fixed short circuit |
| 29 | Main switching unit, breaking capacity 36kA, 415Vac,50Hz, 630A |
| 30 | ACB, Type EDO, 415Vac, 50Hz, 800A, Standard Breaking cap (55KA) |
| 31 | Power contactor 500A, 2 NO + 2 NC |
| 32 | Master Controller - 5 Step, 7 Cam, Master Controller having off position interlock contacts rated for 40 Amps 500 V.A.C. Protection class IP54 |
| 33 | DRIVE-CLIQ signal cable 2m |
| 34 | DBR, Dynamic Breaking Resistor,3.5 Ohm, 115 kW,Material SS 304, Continuous duty. |
| 35 | DBU, P120-170kW DBR, |
| 36 | Main switching unit, breaking capacity 36kA,250 A |
| 37 | Semiconductor fuse, 250 Amps |
| 38 | Semiconductor fuse, 160 Amps |
| 39 | Semiconductor fuse, 50 Amps |
| 40 | Semiconductor fuse, 32A |
| 41 | Semiconductor fuse, 100 Amps |
| 42 | Semiconductor fuse, 20 Amps |
| 43 | Semiconductor fuse, 63 Amps |
| 44 | Semiconductor fuse, 315 Amps |
| 45 | Semiconductor fuse, 200 Amps |
| 46 | Bus connectors withPG interface |
| 47 | Bus connectors withoutPG interface |
| 48 | Front connectors40 pin (Screw type) |
| 49 | Front connectors20 pin (Screw type) |
| 50 | Air Circuit Breaker(ACB) , ‘C’ power , 400 Amp, 3P MF |
| 51 | Main Contactor wit 2 NO+ 2 NC Rating 400A, Coil voltage 240V |
| 52 | 24VDc, 5A Power supply i/p -110/230Vac , O/p 24 Vdc |
| 53 | Auxiliary Contactor |
| 54 | Contactor |
| 55 | CPU PLC Module 1214 C |
| 56 | PLC Extension Module |
| 57 | Rotary type limit switch , Rating 40 A |
| 58 | Gravity type limit switch, Rating10 A |
| 59 | Lever limit switch , Rating 10 A |
| 60 | MCCB with rotary handle Rating 160A, 55KA |
| 61 | Rotary Handle for MCCB |
| 62 | Control Unit CU 240-S |
| 63 | ContactorRating 45 A, 240Vac |
| 64 | MCCB rating63A, 55KA |
| 65 | Sinamics G120 PM 240 30 KW |
| 66 | MCCB 20 A, 55 KA |
| 67 | Sinamics G120 PM 240 7.5 KW |
| 68 | MCCB 63 Amps |
| 69 | Rotary Handle |
| 70 | Contactor 3p, 63Amp |
| 71 | MCCB 32Amp. |
| 72 | MCCB 16 Amp |
| 73 | AC Drive PM250 with line filter 11KW, 380-480 Vac,50Hz |
| 74 | BOP |
| 75 | AC Drive PM250 with line filter 7.5 KW ,380-480 VAC, 50 Hz |
| 76 | Control Unit CU240E-2 DP |
| 77 | 7-10 Amp thermal overload relay |
| 78 | Mounting kit |
| 79 | Power Contactor 9A, 230Vac |
| 80 | Sinamics PM240, 11 Kw /15 Kw |
| 81 | Sinamics PM 240 , 4Kw |
| 82 | Sinamics V20, 4 KW |
| 83 | Sinamics V20, 1.1 KW |
| 84 | Control Unit CU240 B-2 |
| 85 | Sinamics G120Control Unit CU250S-2 |
| 86 | Sinamics G120 Control Unit CU250S-2 DP |
| 87 | Sinamics G120 Control Unit CU240S DP |